Close
|
|
|
|
Follow us on 
@Ask_ICAR for daily updates.
Your job requires that you keep on top of the latest in vehicle, tool, and equipment technology – I-CAR is committed to helping you do so in one convenient place. We regularly publish new articles highlighting the latest and greatest collision repair information.
So check back often and follow us on X @Ask_ICAR to ensure you’re equipped with the most up-to-date collision repair technical information available in the industry.
Aluminum is more common than ever on today’s vehicles. What can you do when an aluminum dent has stretched during the repair process?
When repairing Tesla vehicles, it is important to read repair guidelines in the body repair manual, especially when it comes to repairing parts or panels that impact sensors are mounted to. Let’s see what Tesla has to say.
What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair limitations? These are just some of the questions that the RTS team fields on a daily basis.
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We’ve had a technical inquiry that asked for clarification of "surrounding parts" in a statement related to the calibration of Genesis advanced driver assistance systems (ADAS) components.
Did you know that Honda has a Job Aid about supplement restraints system (SRS) troubleshooting and repair information?
I-CAR had a discussion on the consideration of part removal at factory seams.
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips and tricks. These videos enable you to, in less than 5 minutes, learn something new. Let’s check out what the team has added for steering knuckle damage inspection and inner tie rod damage.
Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.
High-voltage (HV) vehicles have some special considerations for handling and storing HV batteries and other components. The dangers of HV batteries are potential even after removal which is why certain precautions are needed. Let’s see what General Motors (GM) has to say.
Acura released a Body Repair News bulletin for the 2025-present Acura ADX.
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that asked for clarification on repairing parts or assemblies with adhesively bonded joints on Honda and Acura vehicles.
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips and tricks. These videos enable you to, in less than 5 minutes, learn something new. Let’s check out what the team has added for the Tesla Cybertruck.
The winter edition of General Motors (GM) Repair Insights magazine is now available.
Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require painting to match the vehicle. Vehicle makers often provide information on the painting of new sensors. Some vehicle makers do not recommend refinishing sensors with minor finish damage because excessive paint thickness may adversely affect the operation of the park assist system. However, other vehicle makers allow refinishing and provide guidelines. Let’s see what Genesis has to say.
Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require painting to match the vehicle. Vehicle makers often provide information on the painting of new sensors. Some vehicle makers do not recommend refinishing sensors with minor finish damage because excessive paint thickness may adversely affect the operation of the park assist system. However, other vehicle makers allow refinishing and provide guidelines. Let’s see what Hyundai has to say.
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
Are you wondering if a particular OEM or organization has a published statement on pre-repair and post-repair scanning? We have compiled a list of most of the statements on the subject, so you can...
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
BMW has released a position statement related to pre- and post-repair system scanning. The statement applies to All vehicles equipped with on board diagnostics II (OBD II).
Honda /Acura has updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
Great Designs In Steel (GDIS) 2026 covered multiple topics, many of which were presented by OEM engineers and tier 1 suppliers of body components.
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
The 2026 SkillsUSA National Leadership and Skills Conference took place on June 4, 2026. Every year, I-CAR sends volunteers (virtually in 2021) to judge the collision repair technology competition....
We are often asked, “Can a spray-in bedliner be repaired?” Let’s take a look at some repair options and considerations.
We are often asked, “What do I do if there isn’t a procedure to replace a service part?” Let’s see what Volkswagen says.
We are often asked, “What do I do if there isn’t a procedure to replace a service part?” Let’s see what Audi says.
I-CAR had numerous presentations at the 2025 SEMA show. One of these presentations focuses on considerations for ceramic coatings in the body shop.
I-CAR had a discussion on Ford/Lincoln corrosion protection.
Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but...
Nissan has released a collision position statement providing guidelines for refinishing the Nissan ARIYA bumper cover.