Advanced Driver Assistance Systems: 2020 Hyundai Palisade

Details Posted on 28 October 2020 | Share:

| Print

While many have noticed that advanced driver assistance systems (ADAS) are showing up on vehicles, there still is confusion on what is required of these systems after a collision occurs. The Ask I-CAR team frequently gets questions in regard to calibration of ADAS. Many of these questions can be answered simply by using the OEM Calibration Requirements Search. However, there are some questions that may need more details than the calibration search provides. Let’s take a look at the 2020 Hyundai Palisade.

For 2020, the Palisade may be equipped with rear view (Rear View Monitor), collision warning, collision braking (Forward Collision-Avoidance Assist), blind spot detection (Blind-Spot Collision Warning), rear cross traffic (Rear Cross-Traffic Collision Warning), lane departure warning, lane keep assist, adaptive cruise control (Smart Cruise Control), adaptive lighting (High Beam Assist), park assist (Parking Distance Warning ), and 360° camera view (Surround View Monitoring) systems. This means that there is a large array of cameras and sensors that collision repairers will need to be aware of, many of which will require calibrations. Information for when these calibrations are required can be found in the vehicle-specific repair information, and also on the 2020 Hyundai Palisade OEM Calibration Requirements Search page.

Located in the front bumper are four ultrasonic park assist sensors. In addition, there are four more sensors located in the rear bumper. These sensors collect and send information to the park assist system. Calibration is not required for these sensors.

Behind the front bumper cover, below the bumper reinforcement, is a radar sensor. This sensor sends information to the collision warning and collision braking systems, as well as the adaptive cruise control system. Calibration will be required for this sensor after certain events. There are static and dynamic calibrations.

Located near the center of the grille is the front camera, which is part of the 360° camera view system. This four-camera system also has cameras located on the bottom of each exterior side mirror. A final camera is located near the center of the liftgate above the license plate. This camera is also part of the rear view system. There are several events that will make calibration necessary for these cameras. The calibration procedure for these cameras is static.

In front of the rearview mirror, attached to the windshield, is a forward-facing camera. This camera sends data to the lane departure warning and lane keep assist systems. It also provides input to the collision warning, collision braking, and adaptive lighting systems. There are several events that make calibration necessary for this camera. This is a static calibration procedure for this camera.

Located behind the rear bumper cover, there is a radar sensor on each corner of the vehicle. The sensors are mounted to the vehicle. These sensors are used by the blind spot detection and rear cross traffic systems. There is no calibration procedure for these sensors.

This is just a brief overview of some of the different required procedures for the 2020 Palisade. Always consult the OEM repair information to get the exact information and procedures required to service the ADAS.

For additional Hyundai information, check out the Hyundai OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:

• ADAS, Calibration, And Scanning Article Hotspot
• Collision Information Website Access: Hyundai
• How To Use The OEM Calibration Requirements Search
• Locating ADAS Information: Hyundai

Related I-CAR Courses

Course I-CAR ADAS Courses