Advanced Driver Assistance Systems: 2019 Nissan Murano

While many have noticed that advanced driver assistance systems (ADAS) are showing up on vehicles, there still is confusion on what is required of these systems after a collision occurs. The Ask I-CAR team frequently gets questions in regard to calibration of ADAS. Many of these questions can be answered simply by using the OEM Calibration Requirements Search. However, there are some questions that may need more details than the calibration search provides. Let’s take a look at the 2019 Nissan Murano.

For 2019, the Murano has standard collision warning, collision braking, and rear view systems. Optional systems include blind spot detection, rear cross traffic, lane departure warning, lane keep assist, adaptive cruise control, adaptive lighting, park assist, and 360° camera view. This means that there is a large array of cameras and sensors that collision repairers will need to be aware of, many of which will require calibrations. Information for when these calibrations are required can be found in the vehicle specific repair information, and also on the 2019 Nissan Murano OEM Calibration Requirements Search page.

In the front bumper cover, there are four ultrasonic sensors. There are an additional four ultrasonic sensors located in the rear bumper. These sensors are used by the park assist system. These sensors do not require calibration but do need to be mounted in a specific orientation.

Behind the front lower grille is a radar sensor. This sensor sends information to the collision warning and collision braking systems, as well as the adaptive cruise control. Calibration will be required for this sensor after certain events. The calibration procedure for this sensor is a static calibration.

Located in the Nissan emblem in the grille is the front camera that is part of the 360° camera view system. This four-camera system also has cameras located on the bottom of each exterior side mirror. A final camera is located in the center of the liftgate, next to the license plate lamp. There are several events that will make calibration necessary for these cameras. The calibration procedure for these cameras is a static calibration


In front of the rearview mirror, attached to the windshield, is a forward-facing camera. This camera sends data to the lane departure warning and lane keep assist systems. There are several events that make calibration necessary for this camera. This is a static calibration procedure.

Located behind the rear bumper cover, there is a radar sensor on each corner of the vehicle. The sensors are mounted to the lower quarter panel. These sensors are used by the blind spot detection and rear cross traffic systems. These sensors do not require calibration, but there is a procedure with measurements to help ensure the sensor is in the correct location.

This is just a brief overview of some of the different required procedures for the 2019 Nissan Murano. Always consult the OEM repair information to get the exact information and procedures required to service the ADAS.

For additional Nissan information, check out the Nissan OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses