Locating OEM-Approved ADAS Tools: Nissan/INFINITI

When researching calibration procedures for advanced driver assistance systems (ADAS), you may notice that many of the procedures require the use of specific tools. Some tools may be everyday items like string, tape, levels, paper, etc. However, many of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.

The RTS team is researching how to find these tools to make it easier for technicians performing these procedures. As we research the location of these special tools, we are compiling the information in a series of OEM-specific articles. Let’s see where you can find Nissan/INFINITI-approved tool information.

Scan tool programming and software information can be found for free at www.nissan-techinfo.com and www.infiniti-techinfo.com. Once you are on the website, select a country. This will take you to the home page where there are links to documents for:

  • CONSULT
  • Diagnostic Software
  • NERS J2534 ECU Programming

Nissan/INFINITI provides a chart of approved non-OEM scan tools that can be used with the use of the correct software downloaded onto them.

To purchase scan tools and other OEM approved tools, go to the TechMate Nissan Authorized Tools And Equipment or the TechMate INFINITI Authorized Tools And Equipment website. Use the search bar at the top of the website to search a specific part number or keyword. You can also use the categories on the side of the webpage to browse for tools.

Always follow OEM procedures when calibrating ADAS. Make sure to check procedures for the required tools to help ensure a complete, safe, and quality repair.

For additional Nissan/INFINITI information, check out the following pages:
Nissan OEM Information
INFINITI OEM Information

Additional I-CAR Collision Repair News you may find helpful:


Related I-CAR Courses

  • I-CAR Repairers Realm: Steering Column Inspection After A Collision - Now Available Friday, 1 November 2024

    I-CAR had a discussion on consideration for steering column inspection after a collision.

  • OEM Emergency Response Guide: Polestar Thursday, 31 October 2024

    Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to...

  • Back-To-Basics: Stationary Glass Installation Considerations Wednesday, 30 October 2024

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. When replacing stationary glass, there are extra considerations to perform a complete and quality...

  • One-Time-Use Parts And Fasteners: Genesis Friday, 25 October 2024

    What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big...

  • OEM Linking Pin: Toyota/Lexus Sectioning Clarification Thursday, 24 October 2024

    As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. A common question when it comes to...

  • Refinishing Park Assist Sensors: Jaguar Land Rover Tuesday, 22 October 2024

    Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require...

  • I-CAR At SEMA 2024 Friday, 18 October 2024

    Attending the SEMA Show in Las Vegas this year? Well, I-CAR will be providing many different opportunities to connect with you at this year’s show.

  • Non-SRS Wiring Repair: BMW/Mini Thursday, 17 October 2024

    What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As...

  • Paint Maker ADAS Radar Optimized Color Resources: BASF Wednesday, 16 October 2024

    Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but...

  • Repairer Driven News: BMW Adds Structural Steel Parts To Restricted List Thursday, 10 October 2024

    Repairer Driven News (RDN) has released an article highlighting BMW adding structural steel parts to their restricted list.