One-Time-Use Parts And Fasteners: Genesis

What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big question is "Where do I find this information"?

As the Repairability Technical Support (RTS) team researches OEMs for one-time-use fastener/part information, we are putting together a series of articles on how and where to locate this information for specific OEMs. Let’s take a look at Genesis.

Found in: General Information ➤ General Service information ➤ General Information, Genesis states:

"If removed, the following parts should always be replaced with new ones.

  1. Oil seals
  2. Gaskets
  3. O-rings
  4. Lock washers
  5. Cotter pins (split pins)
  6. Plastic nuts"

Genesis utilizes a blue "Notice" header for information that helps prevent errors that could damage the vehicle. This is where you may find one-time-use fastener information called out within a procedure.

For example, in a 2023 Genesis G80 rear shock absorber procedure, there is a notice that states: "Do not reuse the bolt."

Following OEM procedures, including the identification and use of one-time-use fasteners/parts, is important in order to help ensure a complete, safe, and quality repair.

For additional Genesis information, check out the Genesis OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:

  • Corrosion Protection Guidelines: Ford/Lincoln - UPDATE Monday, 4 February 2036

    A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that, left untreated,...

  • Repairer Driven News: Rivian Updates Door Handle Procedure Sunday, 4 February 2035

    Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.

  • Back-To-Basics: Tire Tread Pattern Wednesday, 11 June 2025

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Let’s see how to identify tire tread patterns and their repair considerations.

  • Rivian Restraints Wiring Thursday, 5 June 2025

    The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Rivian's position on this subject.

  • Non-SRS Wiring Repairs: Rivian Thursday, 5 June 2025

    What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As...

  • High-Voltage Handling And Storage Considerations: Mazda Wednesday, 4 June 2025

    High-voltage (HV) vehicles have some special considerations for handling and storing HV batteries and other components. The dangers of HV batteries are potential even after removal which is why...

  • I-CAR Repairers Realm: Lateral Tension Dent Removal - Now Available Wednesday, 28 May 2025

    I-CAR had a discussion on KECO tools for lateral tension dent removal.

  • I-CAR Just In Time: Proper Tire Mounting Tuesday, 27 May 2025

    Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...

  • Step-By-Step: Submitting ALLDATA Library Request Friday, 23 May 2025

    Per your requests, here are the step-by-step instructions for submitting a library request in ALLDATA.

  • Back-To-Basics: Weldable Seam Sealer Thursday, 22 May 2025

    Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When researching some OEM body repair manuals (BRMs), you may find callouts for the use of...