Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / OEM ADAS Radar Optimized Color Resources: Genesis

OEM ADAS Radar Optimized Color Resources: Genesis

Posted on 08 August 2024 | Share:
| Print Print

Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but color formula selection may also be a contributing factor. What resources do repairers have available? Let’s see what Genesis has to say.

Genesis has a Refinishing Precautions For Paint With Aluminum Contents technical service bulletin (TSB). This document is found in: Service Information ➤ TSB ➤ Body (Interior And Exterior) ➤ Refinishing Precautions For Paint With Aluminum Contents.

The document states: "If the aluminum content in the paint exceeds a specified amount, the paint could cause diffused reflection of the signals from the front corner radar units. This interference may cause false vehicle detections in the ADAS and improper Highway Lane Change Assist operation."

Genesis provides a chart for allowable aluminum content to prevent diffused reflection of radar signals. This chart contains exterior color name, color code, and maximum aluminum content as a percentage.

More information pertaining to the front corner radars (sensors behind the front bumper cover) is in vehicle-specific service information under: Shop ➤ Equipped Engine ➤ Advanced Driver Assistance System ➤ Advanced Driver Assistance System Driving ➤ Front Corner Radar.

For example, in a 2024 G90 Front Corner Radar installation procedure Genesis states: "When installing front corner radar units, brackets, and extension wires, mounting angle of the front corner radar must be checked. *How to check mounting angle: When the bumper is installed, drive on the road with guardrails over 20 minutes and check if any DTC regarding mounting angle shows up."

Improper color selection may cause ADAS to malfunction and potentially fail. Check OEM repair information to identify what restrictions may apply to the repairs you are considering. Always verify that the ADAS is functioning properly after completing repairs.

For additional Genesis information, check out the Genesis OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses

Course I-CAR ADAS Courses

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
2014 Jeep CherokeeIs there a procedure available for resetting the active headrestt?
BMW Can I-CAR send me BMW repair procedures?
Hyundai Does Hyundai have part replacement procedures available?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?