Close
|
|
|
|
Follow us on 
@Ask_ICAR for daily updates.
Your job requires that you keep on top of the latest in vehicle, tool, and equipment technology – I-CAR is committed to helping you do so in one convenient place. We regularly publish new articles highlighting the latest and greatest collision repair information.
So check back often and follow us on X @Ask_ICAR to ensure you’re equipped with the most up-to-date collision repair technical information available in the industry.
The twenty-first installment of the I-CAR Collision Reporter - The Emerging Technologies Issue has been released. This issue focuses on technology trends of the intra-industry.
Ford has released the fourth installment of their On Target publication for 2022.
I-CAR had a discussion on corrosion protection application.
It is always exciting to see what new gadgets are in upcoming vehicles. Each year, new technology is poured into the automotive space including sensors, radars, lights, entertainment, and safety devices. These new technologies are often a driving force for vehicle purchases. What new technology has emerged, and how can it affect repairability? Let’s take a look at tire-mounted pressure sensors.
Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require painting to match the vehicle. Vehicle makers often provide information on the painting of new sensors. Some vehicle makers do not recommend refinishing sensors with minor finish damage because excessive paint thickness may adversely affect the operation of the park assist system. However, other vehicle makers allow refinishing and provide guidelines. Let’s see what Volkswagen has to say.
I-CAR has developed courses that overview several features on the 2021 Ford Explorer, as well as repairability.
Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. One of the many functions of the Repairability Technical Support (RTS) team is to assist the collision repair industry with understanding repair procedures. The team often receives questions such as, "Does this part need to be removed?"
Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.
I-CAR had a discussion on the Ford F-150 Lightning.
The 2021-present Nissan Rogue (T33) has a trunk floor sectioning procedure that requires the removal of the rear floor crossmember. Let’s take a look at what Nissan says to do with the crossmember.
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. Recently, we had a technical inquiry that asked on the type of sectioning joint to be used in the quarter glass flange when sectioning the outer quarter panel on a 2020 Chevrolet Tahoe. The lap joint specified in the procedure would prevent the quarter glass from being seated properly. We reached out to GM for clarification.
The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Rolls-Royce position on this subject.
I-CAR has developed courses that overview several features on the 2022 Honda HR-V, as well as repairability.
What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big question is "Where do I find this information"?
Navigating OEM websites can be challenging when searching for collision repair procedures, especially as no two OEM websites are alike. What happens when you need to find other types of repair information, such as, "What needs to be inspected after a supplemental restraints system (SRS) deployment?", or "Does the tire pressure monitoring system (TPMS) require a scan tool or specialty tool?" Let's take a closer look at the Mercedes-Benz website.
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
Are you wondering if a particular OEM or organization has a published statement on pre-repair and post-repair scanning? We have compiled a list of most of the statements on the subject, so you can...
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
BMW has released a position statement related to pre- and post-repair system scanning. The statement applies to All vehicles equipped with on board diagnostics II (OBD II).
Honda /Acura has updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
Great Designs In Steel (GDIS) 2026 covered multiple topics, many of which were presented by OEM engineers and tier 1 suppliers of body components.
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
The 2026 SkillsUSA National Leadership and Skills Conference took place on June 4, 2026. Every year, I-CAR sends volunteers (virtually in 2021) to judge the collision repair technology competition....
We are often asked, “Can a spray-in bedliner be repaired?” Let’s take a look at some repair options and considerations.
We are often asked, “What do I do if there isn’t a procedure to replace a service part?” Let’s see what Volkswagen says.
We are often asked, “What do I do if there isn’t a procedure to replace a service part?” Let’s see what Audi says.
I-CAR had numerous presentations at the 2025 SEMA show. One of these presentations focuses on considerations for ceramic coatings in the body shop.
I-CAR had a discussion on Ford/Lincoln corrosion protection.
Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but...
Nissan has released a collision position statement providing guidelines for refinishing the Nissan ARIYA bumper cover.