Sectioning and Partial Part Replacement: 2018 Land Rover Range Rover Velar

Sectioning and Partial Part Replacement: 2018 Land Rover Range Rover Velar

One of the top technical inquiries received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2018 Land Rover Range Rover Velar.

The full OEM Partial Part Replacement Search page for the 2018 Range Rover Velar can be viewed on the I-CAR website. This will give you a good understanding on general areas for sectioning or partial replacement. I-CAR does not have permission to show exact locations for sectioning or the procedure itself. However, Land Rover has paid subscription website with collision repair information website for Body Repair Manuals (BRM).

There are no OEM procedures for the front lower rail. Partial part replacement is available for the front upper rail and the rear rail. The rear rail also has a single location in which it can be sectioned. Multiple sectioning locations are available for the outer uniside. However, there are no OEM procedures are available for the uniside reinforcement, inner uniside, or the rear body panel. The trunk floor can be partially replaced at factory seams in multiple locations.


For additional JLR information, check out the following pages:
Jaguar OEM Information
Land Rover OEM Information

Additional I-CAR Collision Repair News you may find helpful:
Step-By-Step: Accessing Land Rover Repair Information
What's A Land Rover Fender Apron Panel?