Hyundai: Who Requires Or Recommends MIG Brazing?

Hyundai: Who Requires Or Recommends MIG Brazing?

In Europe, MIG brazing has been required or recommended on a widespread basis for several years. In the U.S., MIG brazing is not as common but is becoming more prevalent. As the RTS team is researching MIG brazing information, we are putting together a series of articles that identify OEM-specific MIG brazing recommendations and requirements for vehicles in the U.S. Let’s see what Hyundai has to say.

Hyundai references brazing in the General Information area under the Body panel Repair Procedure category of the body repair manual. Here they state: "Do not braze any body components other than the ones brazed at the factory. Do not use an oxy-acetylene torch for welding."

To find this information:

  1. Log in to
  2. Click Service Information (top of webpage)
  3. Click Body (top right-hand corner of webpage)
  4. Choose Model and Year
  5. Click on Body Repair (left-hand side of webpage)
  6. Click on Body Repair Manual to expand
  7. Click on Body Panel Repair Procedure to expand
  8. Click on General Information

It is important to check vehicle-specific body repair manuals and other OEM information about MIG brazing in order to ensure a complete, safe, and quality repair.

For additional Hyundai information, check out the Hyundai OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:
MIG Brazing: What, Where, When, And Why?
Welding And MIG Brazing Hotspot
Who Requires Or Recommends MIG Brazing? UPDATE

Related I-CAR Courses