I-CAR Releases OEM Calibration Requirements Search

LAS VEGAS, November 1, 2016 – I-CAR® announced today at SEMA Show 2016 a groundbreaking information resource for collision repair professionals: a vehicle-by-vehicle guide to calibration requirements for advanced driver assistance systems (ADAS) for every 2016 make and model sold in the U.S.
The "OEM Calibration Requirements Search" feature, available online through the I-CAR Repairability Technical Support (RTS) Portal, describes calibration requirements for each vehicle when repairing vehicles equipped with systems such as:
- Adaptive cruise control
- Park assist
- Active park assist
- 360-degree camera
- Collision warning
- Collision braking
- Blind spot detection
- Lane departure warning
- Lane keep assist
- Side view
- Rear view
- Rear cross traffic
- Front cross traffic
- Adaptive lighting
- Night vision
- Traffic sign recognition
This type of calibration guide is the first of its kind in the collision repair industry and will be available exclusively to current RTS Portal subscribers. The portal is free to professionals at I-CAR Gold Class® and to those who have earned Platinum recognition and individuals currently undergoing training. There are approximately 110,000 current subscribers.
"I-CAR is committed to helping the industry respond to the 'Technical Tsunami™', and the emerging arena of diagnostics, or scanning, and calibration is an area where I-CAR has established an industry leadership role to ensure proper knowledge and skills are developed and applied in the repair process. We are actively working with the inter-industry to clarify and resolve points of technical confusion, and developing related information tools and curriculum enhancements that will roll out in the coming years," said I-CAR CEO & President John Van Alstyne. "This new search tool, which represents hundreds of hours of time to develop, is representative of the value our Repairability Technical Support, or RTS services are delivering to the inter-industry."
The first phase of the calibration matrix, being released today, will include information on up to 90 percent of 2016 model year vehicles sold in the U.S. In early 2017, I-CAR expects to have 100 percent coverage of 2016 U.S. models, with a focus on 2017 model-year vehicles and ongoing tool enhancements beginning shortly thereafter.
"I-CAR believes this will be a great resource for repair professionals to leverage during the damage analysis process," said Jason Bartanen, I-CAR Director of Industry Technical Relations, who demonstrated the tool onstage at SEMA. "If, during damage analysis/blueprinting, an estimator or auto physical damage appraiser (APDA) identifies that a vehicle is equipped with ADAS, a quick visit to the RTS Portal will identify those conditions that will require post-repair calibration for that system. This will help in development of the repair plan, and doing this work in advance will improve cycle time."
Users can search on the matrix for the vehicle make and model they are repairing. The listings, which are color-coded for each system, display all of the options and events that will necessitate calibrations for that system. For each safety option, the calibration matrix shows which cameras and sensors are involved, where they are located and the calibrations required for them. Conversely, it shows which ADAS are affected by each camera and sensor. The listing also indicates whether scan tools and/or special tools are required for the calibrations and whether the system will illuminate a Malfunction Indicator Lamp (MIL) or set a Diagnostic Trouble Code (DTC) if the system detects an error during the pre- or post-repair scanning process. Troubleshooting notes are included with each calibration.
In addition to furnishing calibration information, the search function provides links to vehicle system definitions, repair information from each automaker and additional information housed in the portal.
A preview of the calibration matrix is available here.
Additional I-CAR Collision Repair News you may find helpful:
A Video Tour of the RTS Portal: OEM Calibration Requirements Search
ADAS, Calibration, And Scanning Article Hotspot
How To Use The OEM Calibration Requirements Search
RTS Subscription Explanation
Why Can’t I Find Certain Vehicles In The OEM Calibration Requirements Search?
Related I-CAR Courses
-
Pre- and Post-Repair System Scanning Position Statements
Wednesday, 09 January 2019
Are you wondering if a particular OEM or organization has a published position statement on pre-repair and post-repair scanning? We have compiled a list of most of the position statements…
-
Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning
Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
-
ADAS, Calibration, And Scanning Article Hotspot
Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s…
-
Typical Calibration Requirements For Blind Spot Sensors
Wednesday, 19 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system…
-
Restraints Wiring Repairs
Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
-
Typical Calibration Requirements For Forward Radar Sensors
Wednesday, 12 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system…
-
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE
Wednesday, 22 May 2019
Honda /Acura have updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
-
MIG Brazing What Is It, Why Should I Use It?
Monday, 02 June 2014
Why MIG Brazing? It is widely known that GMA welded; fully galvanized steel will lose some of its properties, including corrosion protection, due to the heat created during welding. OEMs…
-
Typical Calibration Requirements For Park Assist Sensors
Monday, 31 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system…
-
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning
Thursday, 09 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
-
Bumper Cover Repair With ADAS: Toyota/Lexus - UPDATE
Thursday, 01 June 2023
A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance…
-
Non-SRS Wiring Repairs: Volvo
Wednesday, 31 May 2023
What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms).…
-
OEM Emergency Response Guides: VinFast
Friday, 26 May 2023
Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to…
-
Calibration Research Tips: Hyundai/Genesis Driver Parking Assistance System
Thursday, 25 May 2023
While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by…
-
I-CAR Repairers Realm: High Voltage Battery Recovery - Coming Soon
Wednesday, 24 May 2023
I-CAR is having a discussion on high-voltage battery recovery. Tune into I-CAR Repairers Realm to watch.
-
Locating OEM-Approved HV Tools: Mitsubishi
Friday, 19 May 2023
When researching procedures for disabling a high-voltage (HV) vehicle, you may notice that many of the procedures require the use of specific tools. Some of them are OEM-specific tools or…
-
Welding And MIG Brazing Hotspot
Thursday, 18 May 2023
Welding is a crucial skill in collision repair. The welding equipment and techniques are dynamic – keeping pace with vehicle technology advancement. I-CAR's Repairability Technical Support (RTS) team continues to…
-
I-CAR Repairers Realm: Importance Of OEM Glass Replacement - Now Available
Wednesday, 17 May 2023
I-CAR had a discussion on the importance of OEM glass replacement.
-
Body Construction And Material Repair Guidelines: FCA/Stellantis - UPDATE
Thursday, 11 May 2023
What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold…
-
Straightening And Heat: FCA/Stellantis - UPDATE
Thursday, 11 May 2023
FCA/Stellantis has updated the position statement that provides the requirements for the use of heat when straightening.
- 2023
- June 2023 (1)
- May 2023 (13)
- April 2023 (11)
- March 2023 (14)
- February 2023 (10)
- January 2023 (11)
- 2022
- December 2022 (11)
- November 2022 (12)
- October 2022 (11)
- September 2022 (13)
- August 2022 (12)
- July 2022 (10)
- June 2022 (13)
- May 2022 (11)
- April 2022 (12)
- March 2022 (12)
- February 2022 (12)
- January 2022 (13)
- 2021
- December 2021 (15)
- November 2021 (12)
- October 2021 (13)
- September 2021 (15)
- August 2021 (12)
- July 2021 (16)
- June 2021 (17)
- May 2021 (14)
- April 2021 (15)
- March 2021 (21)
- February 2021 (15)
- January 2021 (14)
- 2020
- December 2020 (14)
- November 2020 (17)
- October 2020 (12)
- September 2020 (14)
- August 2020 (12)
- July 2020 (18)
- June 2020 (16)
- May 2020 (14)
- April 2020 (20)
- March 2020 (12)
- February 2020 (14)
- January 2020 (14)
- 2019
- December 2019 (13)
- November 2019 (19)
- October 2019 (25)
- September 2019 (20)
- August 2019 (22)
- July 2019 (23)
- June 2019 (21)
- May 2019 (19)
- April 2019 (20)
- March 2019 (21)
- February 2019 (21)
- January 2019 (18)
- 2018
- December 2018 (19)
- November 2018 (19)
- October 2018 (17)
- September 2018 (16)
- August 2018 (22)
- July 2018 (21)
- June 2018 (21)
- May 2018 (18)
- April 2018 (19)
- March 2018 (22)
- February 2018 (17)
- January 2018 (20)
- 2017
- December 2017 (15)
- November 2017 (15)
- October 2017 (19)
- September 2017 (20)
- August 2017 (20)
- July 2017 (18)
- June 2017 (23)
- May 2017 (20)
- April 2017 (15)
- March 2017 (18)
- February 2017 (11)
- January 2017 (13)
- 2016
- December 2016 (9)
- November 2016 (14)
- October 2016 (21)
- September 2016 (11)
- August 2016 (11)
- July 2016 (8)
- June 2016 (13)
- May 2016 (11)
- April 2016 (11)
- March 2016 (13)
- February 2016 (11)
- January 2016 (9)
- 2015
- December 2015 (10)
- November 2015 (8)
- October 2015 (9)
- September 2015 (7)
- August 2015 (11)
- July 2015 (10)
- June 2015 (8)
- May 2015 (8)
- April 2015 (9)
- March 2015 (8)
- February 2015 (9)
- January 2015 (11)
- 2014
- December 2014 (12)
- November 2014 (7)
- October 2014 (12)
- September 2014 (10)
- August 2014 (9)
- July 2014 (12)
- June 2014 (9)
- May 2014 (14)
- April 2014 (9)
- March 2014 (6)
- February 2014 (1)
- January 2014 (27)