One-Time-Use Parts And Fasteners: Mercedes-Benz

What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big question is "Where do I find this information?"

As the Repairability Technical Support (RTS) team researches OEMs for one-time-use fastener/part information, we are putting together a series of articles on how and where to locate this information for specific OEMs. Let’s take a look at Mercedes-Benz.

Mercedes-Benz provides a document found in vehicle-specific body repair manuals under General Notes: Passenger Cars: Overall Vehicle ➤ Notes On Self-locking Nuts And Bolts.

Per Mercedes-Benz: "Bolts and nuts with locking splines (A), self-locking nuts (B) and microencapsulated bolts and nuts (C) must always be replaced after they have been used once. Furthermore, the screws/bolts on threaded connections with self-locking nuts (B) must be checked for damage and replaced if necessary."

Following OEM procedures, including the identification and use of one-time-use fasteners/parts is essential for a proper repair.

For additional Mercedes-Benz information, check out the Mercedes-Benz OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:


Related I-CAR Courses

  • Repairer Driven News: Rivian Updates Door Handle Procedure Sunday, 4 February 2035

    Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.

  • 2025 SkillsUSA National Competition Results Monday, 30 June 2025

    The 2025 SkillsUSA National Leadership and Skills Conference took place on June 26, 2025. Every year I-CAR sends volunteers (virtually in 2021) to judge the collision repair technology competition....

  • Ford/Lincoln Rocker Panel Reinforcement Sectioning Friday, 27 June 2025

    We are often asked, “Can I section this panel?” Let’s take a look at Ford/Lincoln vehicles and sectioning the rocker panel reinforcement.

  • Back-To-Basics: Backside Panel Refinish And Edging Thursday, 26 June 2025

    Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When repairing and refinishing, you might need to refinish the panel's backside and edges.

  • Hyundai Position Statement: Pre- And Post-Repair System Scanning - UPDATE Monday, 23 June 2025

    Hyundai released an updated position statement relating to pre- and post-repair system scanning.

  • App-Based Connected Services Considerations Tuesday, 17 June 2025

    Have you had an experience where the vehicle notified the owner that it was being moved while it was in your repair facility? App-based connected services are available from many vehicle makers and...

  • Digital Key Considerations Tuesday, 17 June 2025

    The intermingling of technology and automobiles continues, with digital key offerings from most vehicle makers. Digital keys utilize smartphone technology to expand vehicle access and owner...

  • Back-To-Basics: Tire Tread Pattern Wednesday, 11 June 2025

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Let’s see how to identify tire tread patterns and their repair considerations.

  • Corrosion Protection Guidelines: Ford/Lincoln - UPDATE Tuesday, 10 June 2025

    A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that, left untreated,...

  • Rivian Restraints Wiring Thursday, 5 June 2025

    The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Rivian's position on this subject.