Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Additional Calibration Requirements: Ford/Lincoln

Additional Calibration Requirements: Ford/Lincoln

Posted on 26 May 2017 | Share: | Print Print

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

It does not include occupant classification systems (OCS), steering angle sensors, battery disconnects, or other calibrations/initializations required, when not related directly to ADAS. Let’s take a look at what additional items may require calibrations/initializations on Ford/Lincoln vehicles.

Information for additional calibrations can be found in the vehicle-specific Workshop manuals. The need for calibration is sometimes found in the replacement procedure for various parts. Some of the additional items needing calibration/initialization are as follows:

  • power liftgate
  • occupant classification system (OCS)
  • power windows
  • tire pressure monitoring sensor (TPMS)
  • shock absorbers
  • sunroof

Ford/Lincoln also, have a warning about disconnecting the battery. Per the Ford/Lincoln Workshop manual: “NOTE: When the battery is disconnected and connected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven to allow the PCM to relearn the adaptive strategy values.”

There are many more systems that may need to be calibrated after removal or a collision. Make sure to check the repair manual to know what systems may be affected by the repairs that you are performing to help ensure a complete, safe, and quality repair.

For additional Ford/Lincoln information, check out the following pages:
Ford OEM Information
Lincoln OEM Information

Additional I-CAR Collision Repair News you may find helpful:
ADAS, Calibration, And Scanning Article Hotspot
Additional Calibration Requirements
Calibration Research Tips
Collision Information Website Access: Ford/Lincoln
Locating ADAS Information: Ford/Lincoln

Related I-CAR Courses

Course Ford Collision Repair Overview

Course I-CAR ADAS Courses

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Hyundai Does Hyundai have part replacement procedures available?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan Is there a wiring repair procedure for the airbag connector?

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?