Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Sectioning and Partial Part Replacement: 2018 Honda Fit

Sectioning and Partial Part Replacement: 2018 Honda Fit

Posted on 07 September 2018 | Share:
| Print Print

One of the top technical inquiries received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2018 Honda Fit.

The full OEM Part Replacement Search page for the 2018 Honda Fit can be viewed on I-CAR’s website. This will give you a good understanding on general areas for sectioning or partial replacement. I-CAR does not have permission to show exact locations for sectioning or the procedure itself. However, Honda has a paid subscription website with collision repair information.

The Fit has a single sectioning location on the front lower rail, and multiple locations for partial part replacement at factory seams. The front upper rail also has procedure(s) available for partial part replacement at factory seams but does not have a sectioning procedure. The front lower rail requires MAG welding and plug welding for installation, as well as spot welding. Fillet welding is used for the front upper rail installation. The rear rail on the Fit has no sectioning procedures available, but does have a single partial replacement at factory seams.

There are multiple locations for sectioning available on the outer uniside. Installation procedures call for MAG welding and plug welding, as well as spot welding in some areas. Sectioning is not permitted on the uniside reinforcement or the inner uniside. There are no sectioning procedures available for the trunk floor, as well as the rear body panel. Even though there is no sectioning for the trunk floor, there are multiple locations where it can be replaced at factory seams.

Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses

Course Panel Removal and Preparation for Installation

Course Part Replacement at Factory Seams

Course Sectioning Overview

Course Sectioning Scenarios

Course Training and Certification: Steel Sectioning

  • Repairer Driven News: Rivian Updates Door Handle Procedure Sunday, 4 February 2035

    Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.

  • 2025 SkillsUSA National Competition Results Monday, 30 June 2025

    The 2025 SkillsUSA National Leadership and Skills Conference took place on June 26, 2025. Every year I-CAR sends volunteers (virtually in 2021) to judge the collision repair technology competition....

  • Ford/Lincoln Rocker Panel Reinforcement Sectioning Friday, 27 June 2025

    We are often asked, “Can I section this panel?” Let’s take a look at Ford/Lincoln vehicles and sectioning the rocker panel reinforcement.

  • Back-To-Basics: Backside Panel Refinish And Edging Thursday, 26 June 2025

    Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When repairing and refinishing, you might need to refinish the panel's backside and edges.

  • Hyundai Position Statement: Pre- And Post-Repair System Scanning - UPDATE Monday, 23 June 2025

    Hyundai released an updated position statement relating to pre- and post-repair system scanning.

  • App-Based Connected Services Considerations Tuesday, 17 June 2025

    Have you had an experience where the vehicle notified the owner that it was being moved while it was in your repair facility? App-based connected services are available from many vehicle makers and...

  • Digital Key Considerations Tuesday, 17 June 2025

    The intermingling of technology and automobiles continues, with digital key offerings from most vehicle makers. Digital keys utilize smartphone technology to expand vehicle access and owner...

  • Back-To-Basics: Tire Tread Pattern Wednesday, 11 June 2025

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Let’s see how to identify tire tread patterns and their repair considerations.

  • Corrosion Protection Guidelines: Ford/Lincoln - UPDATE Tuesday, 10 June 2025

    A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that, left untreated,...

  • Rivian Restraints Wiring Thursday, 5 June 2025

    The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Rivian's position on this subject.

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
2014 Jeep CherokeeIs there a procedure available for resetting the active headrestt?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Hyundai Does Hyundai have part replacement procedures available?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repair tolerances?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?