Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Typical Calibration Requirements For Steering Angle/Position Sensors

Typical Calibration Requirements For Steering Angle/Position Sensors

Posted on 09 November 2016 | Share: | Print Print

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at steering angle/position sensors.

Steering angle/position sensors are normally part of the steering column. The sensor monitors what direction the steering wheel is turned. The steering angle sensor controls systems such as, lane keep assist, blind spot detection, and adaptive lighting. Calibration of a steering angle sensors may be needed after an airbag deployment, structural repairs, or a wheel alignment.

Calibration is normally done with a scan tool. Sometimes the vehicle will need to be on an alignment rack. The calibration process is normally done by putting the wheels in the straight forward position, and then zeroing out the sensor with a scan tool.

Being informed on these systems is important to a complete, safe, and quality repair. Many consumers are purchasing a certain vehicle specifically for these driver assistance features. The consumer knows the system is on their vehicle and they are relying on it to help keep them safe. Therefore, technicians also need to be aware when driver assistance systems exist and have the knowledge to properly repair the system.

Additional I-CAR Collision Repair News you may find helpful:
ADAS, Calibration, And Scanning Article Hotspot
Collision Repair Diagnostics Definitions
Typical Calibration Requirements

Related I-CAR Courses

Course I-CAR ADAS Courses

Course Steering Angle Sensor Overview and Diagnostics

  • I-CAR Just In Time: EV Repair Tips Wednesday, 17 April 2024

    Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...

  • I-CAR RTS App Monday, 15 April 2024

    Looking for another tool for your toolbox? An informational guide at your fingertips? Well, the I-CAR Repairability Technical Support (RTS) app is what you are looking for!

  • Repairer Driven News: ADAS Radar Optimized Paint Color Resources Friday, 12 April 2024

    Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. Paint film thickness not only may affect the performance of ADAS radars, color...

  • Back-To-Basics: Window Tab Retractor Thursday, 11 April 2024

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Window regulators have evolved over the years, most now using a clip type retaining method. With...

  • High-Voltage Vehicle Paint Booth Quick Reference Tuesday, 9 April 2024

    When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.

  • Ford On Target 2024: Volume 1 Friday, 5 April 2024

    Ford has released the first installment of their On Target publication for 2024.

  • 3M Offers SOP And Process Hands-On Training and Skill Development Thursday, 4 April 2024

    The 3M Skills Development Center is a 15,000 sq ft facility where technicians can take a Body Repair Course or Paint Prep and Refinish Course. Both courses are majority hands-on of standard...

  • OEM Linking Pin: Nissan/INFINITI Outer Uniside Sectioning - Cut Line Clarification Wednesday, 3 April 2024

    As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that...

  • I-CAR Repairers Realm: All New RTS App From I-CAR - Now Available Friday, 29 March 2024

    I-CAR had a discussion on the new Repairability Technical Support (RTS) app from I-CAR.

  • OEM Linking Pin: Subaru Solterra Body Repair Manual Tuesday, 26 March 2024

    As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that...

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Hyundai Does Hyundai have part replacement procedures available?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan Is there a wiring repair procedure for the airbag connector?

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?