Structural Sectioning Procedures: Hyundai

Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.

Parts are made from various materials including HSS, UHSS, aluminum, and carbon fiber. These parts also have complex designs to collapse or transfer collision forces in a specific manner. Introducing a sectioning joint to many of these parts will alter how the part reacts to those collision forces. For this reason, sectioning a part is only allowed if supported by vehicle maker repair information. Let’s see what Hyundai says about structural sectioning.

Per vehicle-specific body repair manuals (BRMs) under Body Panel Repair Procedures ➤ General Information: "caution during high strength panel repair:

  • A damaged ultra-strength panel should not be repaired by pulling it. Replace the whole panel with a new one.
  • A damaged ultra-strength panel should not be partially replaced at random. Replace the whole panel with a new one.
  • When a damaged ultra-strength panel is replaced with a new one, spot-welding should be used, if possible. Apply the epoxy adhesive, then carry out spot welding."

Hyundai ultra-strength steel panels can be identified by reviewing the Body Construction area in the BRM. In the BRMs that are available there are sectioning and partial part replacement procedures available for non-UHSS parts.

For additional Hyundai information, check out the Hyundai OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:
Collision Information Website Access: Hyundai
Hyundai/Genesis Releases Additional Body Repair Manuals: UPDATE
Step-By-Step: Accessing Hyundai Repair Information


Related I-CAR Courses