Incorporating ADAS In Your Business

Advanced driver assistance systems (ADAS) has hit the automotive industry with full force. Driven by consumer demand and vehicle safety ratings, most vehicles available have the option of being equipped with the full ADAS suite and many have some of these systems as standard. Many of these systems will require calibrations after they are repaired. When it comes to how a collision facility will handle this relatively new and changing technology, there are a lot of questions that need to be answered. Luckily, I-CAR has developed a course that will help businesses make the important decisions regarding ADAS.
The Incorporating ADAS in Your Business course will assist in answering many of the ADAS related questions that arise when collision repairs are made on an ADAS equipped vehicle. This course will help answer questions such as:
- Can my facility handle ADAS calibration?
- What are my options for calibration and scanning equipment?
- If I am unable or do not want to perform calibrations, what are my options?
- Where are ADAS sensors located?
- And much more!
Check out this course to get on the fast track to adapting your business to handle ADAS calibrations. This course will help with the blueprinting process of ADAS vehicles and aid in speeding up production, minimizing delays from lack of information. Knowledge of these safety systems are key to ensuring complete, safe, and quality repairs.
Related I-CAR Courses
-
Pre- and Post-Repair System Scanning Position Statements
Wednesday, 09 January 2019
Are you wondering if a particular OEM or organization has a published position statement on pre-repair and post-repair scanning? We have compiled a list of most of the position statements…
-
Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning
Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
-
ADAS, Calibration, And Scanning Article Hotspot
Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s…
-
Typical Calibration Requirements For Blind Spot Sensors
Wednesday, 19 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system…
-
Restraints Wiring Repairs
Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
-
Typical Calibration Requirements For Forward Radar Sensors
Wednesday, 12 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system…
-
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE
Wednesday, 22 May 2019
Honda /Acura have updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
-
MIG Brazing What Is It, Why Should I Use It?
Monday, 02 June 2014
Why MIG Brazing? It is widely known that GMA welded; fully galvanized steel will lose some of its properties, including corrosion protection, due to the heat created during welding. OEMs…
-
Typical Calibration Requirements For Park Assist Sensors
Monday, 31 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system…
-
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning
Thursday, 09 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
-
Bumper Cover Repair With ADAS: Toyota/Lexus - UPDATE
Thursday, 01 June 2023
A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance…
-
Non-SRS Wiring Repairs: Volvo
Wednesday, 31 May 2023
What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms).…
-
OEM Emergency Response Guides: VinFast
Friday, 26 May 2023
Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to…
-
Calibration Research Tips: Hyundai/Genesis Driver Parking Assistance System
Thursday, 25 May 2023
While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by…
-
I-CAR Repairers Realm: High Voltage Battery Recovery - Coming Soon
Wednesday, 24 May 2023
I-CAR is having a discussion on high-voltage battery recovery. Tune into I-CAR Repairers Realm to watch.
-
Locating OEM-Approved HV Tools: Mitsubishi
Friday, 19 May 2023
When researching procedures for disabling a high-voltage (HV) vehicle, you may notice that many of the procedures require the use of specific tools. Some of them are OEM-specific tools or…
-
Welding And MIG Brazing Hotspot
Thursday, 18 May 2023
Welding is a crucial skill in collision repair. The welding equipment and techniques are dynamic – keeping pace with vehicle technology advancement. I-CAR's Repairability Technical Support (RTS) team continues to…
-
I-CAR Repairers Realm: Importance Of OEM Glass Replacement - Now Available
Wednesday, 17 May 2023
I-CAR had a discussion on the importance of OEM glass replacement.
-
Body Construction And Material Repair Guidelines: FCA/Stellantis - UPDATE
Thursday, 11 May 2023
What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold…
-
Straightening And Heat: FCA/Stellantis - UPDATE
Thursday, 11 May 2023
FCA/Stellantis has updated the position statement that provides the requirements for the use of heat when straightening.
- 2023
- June 2023 (1)
- May 2023 (13)
- April 2023 (11)
- March 2023 (14)
- February 2023 (10)
- January 2023 (11)
- 2022
- December 2022 (11)
- November 2022 (12)
- October 2022 (11)
- September 2022 (13)
- August 2022 (12)
- July 2022 (10)
- June 2022 (13)
- May 2022 (11)
- April 2022 (12)
- March 2022 (12)
- February 2022 (12)
- January 2022 (13)
- 2021
- December 2021 (15)
- November 2021 (12)
- October 2021 (13)
- September 2021 (15)
- August 2021 (12)
- July 2021 (16)
- June 2021 (17)
- May 2021 (14)
- April 2021 (15)
- March 2021 (21)
- February 2021 (15)
- January 2021 (14)
- 2020
- December 2020 (14)
- November 2020 (17)
- October 2020 (12)
- September 2020 (14)
- August 2020 (12)
- July 2020 (18)
- June 2020 (16)
- May 2020 (14)
- April 2020 (20)
- March 2020 (12)
- February 2020 (14)
- January 2020 (14)
- 2019
- December 2019 (13)
- November 2019 (19)
- October 2019 (25)
- September 2019 (20)
- August 2019 (22)
- July 2019 (23)
- June 2019 (21)
- May 2019 (19)
- April 2019 (20)
- March 2019 (21)
- February 2019 (21)
- January 2019 (18)
- 2018
- December 2018 (19)
- November 2018 (19)
- October 2018 (17)
- September 2018 (16)
- August 2018 (22)
- July 2018 (21)
- June 2018 (21)
- May 2018 (18)
- April 2018 (19)
- March 2018 (22)
- February 2018 (17)
- January 2018 (20)
- 2017
- December 2017 (15)
- November 2017 (15)
- October 2017 (19)
- September 2017 (20)
- August 2017 (20)
- July 2017 (18)
- June 2017 (23)
- May 2017 (20)
- April 2017 (15)
- March 2017 (18)
- February 2017 (11)
- January 2017 (13)
- 2016
- December 2016 (9)
- November 2016 (14)
- October 2016 (21)
- September 2016 (11)
- August 2016 (11)
- July 2016 (8)
- June 2016 (13)
- May 2016 (11)
- April 2016 (11)
- March 2016 (13)
- February 2016 (11)
- January 2016 (9)
- 2015
- December 2015 (10)
- November 2015 (8)
- October 2015 (9)
- September 2015 (7)
- August 2015 (11)
- July 2015 (10)
- June 2015 (8)
- May 2015 (8)
- April 2015 (9)
- March 2015 (8)
- February 2015 (9)
- January 2015 (11)
- 2014
- December 2014 (12)
- November 2014 (7)
- October 2014 (12)
- September 2014 (10)
- August 2014 (9)
- July 2014 (12)
- June 2014 (9)
- May 2014 (14)
- April 2014 (9)
- March 2014 (6)
- February 2014 (1)
- January 2014 (27)