Back-To-Basics: Painted Grounds

Back-To-Basics: Painted Grounds

Electrical circuits are nothing new in the collision industry. Vehicle circuits primarily use direct current (DC) for electricity, which requires every circuit to have a good ground in order to be closed. The more advanced vehicle electrical systems become, the more need there is for additional grounds.

If a vehicle only had one ground, it would make for easy diagnosis when having an electrical failure after a collision repair. With only one location, if the ground was disconnected nothing electrical would work on the vehicle. With modern vehicles using multiple grounds, electrical problems can become more difficult to track down. Different joining methods and sound deadening are also part of why multiple grounds may be needed. Adhesives and seam sealers act as an insulator, not allowing electricity to flow through the entire vehicle chassis the same as metal on metal.

If a ground is not making good contact (a common reason is painting over the ground location), or is not connected at all, it does not mean that it will disable everything on that circuit. It may cause circuits to become underpowered or function intermittently. Electrical ground failures also have the tendency to effect multiple unrelated systems, which can lead to a misdiagnosis. Electrical components are not always completely de-energized by a bad ground, but they may be getting lower current flow due to the distance from the ground and resistance from seam sealer, adhesives, etc.

If there is a ground issue, changing out parts will do nothing to fix the problem. In order to prevent creating a bad ground, attention to detail is required. When diagnosing a bad ground, it will require a proper electrical diagnosis processes using diagnostic flow charts and/or wiring diagrams to fix the actual problem.