Weld-Through Primer Guidelines: Genesis

Weld-through primers are generally a zinc-based product that is applied to the mating surfaces prior to welding. Corroding zinc forms zinc oxide, which protects the steel. This is called sacrificial corrosion. For a quality weld to be made it’s required that the weld-through primer be removed from the direct weld zone before welding the joint when GMA welding. Many OEMs have a position on when and how to use weld-through primer or when it shouldn’t be utilized. Let’s see what Genesis recommends and where this information can be found.

Information can be found in vehicle-specific body repair manuals. Genesis calls out the use of weld-through primer within structural replacement or sectioning procedures. These procedures are in Body Repair ➤ Body Panel Repair Procedures.

  • Recommends applying weld-through primer (zinc corrosion inhibitor) for welding in most part replacement procedures.
  • Genesis does not recommend a particular brand of weld-through primer.

Use the vehicle-specific body repair manuals to determine which type of weld welding is required for the repair you are performing. Failure to follow OEM procedures will sacrifice the safety and quality of the repair.

For additional Genesis information, check out the Genesis OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:
Collision Information Website Access: Genesis
Weld-Through Primer Guidelines
Welding And MIG Brazing Hotspot


Related I-CAR Courses