Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / General Motors: Who Requires Or Recommends MIG Brazing?

General Motors: Who Requires Or Recommends MIG Brazing?

Posted on 30 December 2020 | Share: | Print Print

In Europe, MIG brazing has been required or recommended on a widespread basis for several years. In the U.S., MIG brazing is not as common but is becoming more prevalent. As the RTS team is researching MIG brazing information, we are putting together a series of articles that identify OEM-specific MIG brazing recommendations and requirements for vehicles in the U.S. Let’s see what General Motors (GM) has to say.

When searching the service manual, you may notice a general statement that says: "MIG brazing can be used to replace factory spot welds." Per our contact at General Motors: "We are, as of today, only using MIG brazing to replace factory MIG brazing." MIG brazing locations are specified within repair procedures of vehicle-specific service manuals, such as where the upper rail attaches to the upper A-pillar, or hinge pillar, are on the 2020 Cadillac XT5.

The Recommended GM Steel Repairability Matrix mentions MIG brazing as an option on various types of steel with the addition of this note: "Must use 8 mm x 16 mm slotted holes." Again, although the matrix specifies what steel can be MIG brazed, it should only be used if specified in the vehicle-specific repair procedures.

It is important to note that MIG brazing should only be used where indicated in a vehicle-specific repair manual or where specified by the OEM to help ensure a complete, safe, and quality repair.

For additional GM information, check out the following pages:
Chevrolet OEM Information
GMC OEM Information
Buick OEM Information
Cadillac OEM Information

Additional I-CAR Collision Repair News you may find helpful:
MIG Brazing: What, Where, When, And Why?
Welding And MIG Brazing Hotspot
Who Requires Or Recommends MIG Brazing? UPDATE

Related I-CAR Courses

Course General Motors (GM) Company Collision Repair Overview

Course Introduction to MIG Brazing

Course MIG Brazing Hands-On Skills Development

  • Body Shop Business: EV Intake Process Wednesday, 24 April 2024

    Body Shop Business has released an article highlighting the importance of the electric vehicle (EV) intake process.

  • Repairer Driven News: Matte Clearcoat Challenges Monday, 22 April 2024

    Repairer Driven News (RDN) has released an article highlighting the challenges of matte and semi-gloss clearcoat.

  • I-CAR Just In Time: EV Repair Tips Wednesday, 17 April 2024

    Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...

  • I-CAR RTS App Monday, 15 April 2024

    Looking for another tool for your toolbox? An informational guide at your fingertips? Well, the I-CAR Repairability Technical Support (RTS) app is what you are looking for!

  • Repairer Driven News: ADAS Radar Optimized Paint Color Resources Friday, 12 April 2024

    Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. Paint film thickness not only may affect the performance of ADAS radars, color...

  • Back-To-Basics: Window Tab Retractor Thursday, 11 April 2024

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Window regulators have evolved over the years, most now using a clip type retaining method. With...

  • High-Voltage Vehicle Paint Booth Quick Reference Tuesday, 9 April 2024

    When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.

  • Ford On Target 2024: Volume 1 Friday, 5 April 2024

    Ford has released the first installment of their On Target publication for 2024.

  • 3M Offers SOP And Process Hands-On Training and Skill Development Thursday, 4 April 2024

    The 3M Skills Development Center is a 15,000 sq ft facility where technicians can take a Body Repair Course or Paint Prep and Refinish Course. Both courses are majority hands-on of standard...

  • OEM Linking Pin: Nissan/INFINITI Outer Uniside Sectioning - Cut Line Clarification Wednesday, 3 April 2024

    As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that...

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Hyundai Does Hyundai have part replacement procedures available?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan Is there a wiring repair procedure for the airbag connector?

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?