Print
One of the top technical inquiries received at Ask I-CAR, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search that tells you if these procedures are available on a specific vehicle. Let’s take a closer look at the 2017 BMW X5.
The full 2017 BMW X5 OEM Partial Part Replacement Search page is on the RTS website. This gives you a good understanding of general areas for sectioning or partial replacement. I-CAR does not have permission to show exact locations for sectioning or the procedure itself. However, BMW has a paid subscription website with collision repair information.
The X5 has multiple sectioning locations available for both the front lower rail and the upper rail. The procedures specify a butt joint with backing for the sectioning joints. The rear rail has a single sectioning location, which requires a butt joint with backing.
The outer uniside allows for sectioning in multiple locations, including the outer A-pillar, outer B-pillar, and the outer quarter panel. The outer quarter panel uses adhesive only and welded butt joints with reinforcement plates as the backings. There is a special procedure and parts for completing the sectioning joint. There are no sectioning procedures for the rear body panel. The trunk floor has multiple locations for partial part replacement.
Check out www.bmwtechinfo.com to view the 2017 BMW X5 body repair manual.
Additional I-CAR Collision Repair News you may find helpful:
- Collision Information Website Access: BMW/Mini
- Partial Part Replacement At Factory Seams And Sectioning Hotspot
- Step-By-Step: Accessing BMW/Mini Repair Information
- What's A BMW/Mini Engine Support?
Related I-CAR Courses
Original article published April 27, 2018
Article validated in 2026