Volvo Glass Replacement Requirements

Details Posted on 18 November 2016 | Share:

| Print

The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.

It is commonly asked, "What is required when replacing a windshield?" With this question in mind, we will be presenting a series of articles that highlight some of the requirements from the various OEMs. As always, it is important to read through each vehicle-specific procedure to ensure a complete, safe, and quality repair.

Let’s see what Volvo has to say for the 2016-2024 model year.

• Volvo specifies its own product line of cleaning solution, adhesive, activator, and primer for bonded glass.
• Be sure to refer to urethane manufacturer directions for curing time specifications, and do not use adhesive after its expiration date.
• During the installation process, it is important to keep a side window open until the installation is complete. This will help to prevent the sealant from cracking should the doors be opened and closed, causing a pressure change.
• It is important to note that Volvo has a list of special tools that are required.

As a special caution, vehicles equipped with a camera near the rearview mirror (Camera Collision Warning) and rain sensors may need to have the systems calibrated. The calibration procedures are located in the vehicle-specific service manual under: Diagnostics & Planning ➤ Diagnostics ➤ Vehicle Communication ➤ FSM ➤ Advanced ➤ Calibration Radar and Camera.

To access vehicle-specific Volvo stationary glass removal and installation procedures, go to: www.volvotechinfo.com. Once in the vehicle-specific body repair manual, go to: Information ➤ Repair ➤ Removal, Replacement And Installation ➤ 8. Body & Interior ➤ 84. Exterior Trim, Glass, Weather Strip ➤ Glass Weather-Strip For Windscreen And Rear Window.

For additional Volvo information, check out the Volvo OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:

• ADAS, Calibration, And Scanning Article Hotspot
• Stationary Glass Pinchweld Preparation - New Panel
• Step-By-Step: Accessing Volvo Repair Information

Related I-CAR Courses

Course Damage Analysis of Stationary Glass

Course I-CAR ADAS Courses

Course Stationary Glass Removal and Installation

Course Understanding Volvo Collision Repair