I-CAR Just In Time: Axle Housing 2-Point, 3-Position Check

Posted on 08 July 2026

Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips and tricks. These videos enable you to, in less than 5 minutes, learn something new. Let’s check out what the team has added about checking axle housing damage.

Solid axle housings can be damaged in accidents, but the damage can be challenging to diagnose. Let’s watch subject matter experts Jeff Poole and TJ O’Rouke perform the 2-point, 3-position check. This diagnostic test specifically targets the axle housing to detect damage.

Use caution when working around vehicles on hoists.

Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses

Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
Pre- and Post-Repair System Scanning Statements Wednesday, 9 January 2019
Are you wondering if a particular OEM or organization has a published statement on pre-repair and post-repair scanning? We have compiled a list of most of the statements on the subject, so you can...
ADAS, Calibration, And Scanning Article Hotspot Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
BMW Position Statement: Pre- and Post-Repair System Scanning - UPDATE Friday, 10 April 2020
BMW has released a position statement related to pre- and post-repair system scanning. The statement applies to All vehicles equipped with on board diagnostics II (OBD II).
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE Wednesday, 22 May 2019
Honda /Acura has updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
Quickly Identifying Outer Quarter Panels w/Rolled Hem Flanges Monday, 5 March 2018
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
General Motors Position Statement: Pre- and Post-Repair System Scanning Friday, 21 October 2016
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
Restraints Wiring Repairs Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
Typical Calibration Requirements For Forward Radar Sensors Wednesday, 12 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning Thursday, 9 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.

I-CAR Just In Time: Axle Housing 2-Point, 3-Position Check Wednesday, 8 July 2026
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
Honda The Joy Of Repair 2026: Volume 3 Tuesday, 7 July 2026
Honda has released the third volume of The Joy Of Repair newsletter.
Reading Kia Repair Procedures Wednesday, 1 July 2026
One of the many functions of the Repairability Technical Support (RTS) team is to assist the collision repair industry with understanding repair procedures. The team often receives questions such...
Reading Hyundai/Genesis Repair Procedures Wednesday, 1 July 2026
One of the many functions of the Repairability Technical Support (RTS) team is to assist the collision repair industry with understanding repair procedures. The team often receives questions such...
Volvo Windshield Replacement Position Statement Thursday, 25 June 2026
Volvo has updated its position statement on windshield replacements.
Volvo Glass Replacement Requirements: UPDATE Thursday, 25 June 2026
The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and...
I-CAR Repairers Realm: DEG For Repair Planning - Now Available Wednesday, 24 June 2026
I-CAR had a discussion on using the Database Enhancement Gateway (DEG) for repair planning.
Shop Equipment Updates: Miller Welders Wednesday, 17 June 2026
Like your computer and mobile device, shop equipment may require updates to fix bugs or add new features. Miller Electric Manufacturing Co (Miller) manufactures welders, some of which support...
Great Designs In Steel 2026 Presentations Released Friday, 12 June 2026
Great Designs In Steel (GDIS) 2026 covered multiple topics, many of which were presented by OEM engineers and tier 1 suppliers of body components.
I-CAR Just In Time: Torque Wrench Use - UPDATE Wednesday, 10 June 2026
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...