Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Mercedes-Benz Position Statement: Pre- and Post-Repair System Scanning

Mercedes-Benz Position Statement: Pre- and Post-Repair System Scanning

Posted on 28 November 2016 | Share: | Print Print

Mercedes-Benz (MBUSA) is known for their use of technology in their vehicles. Many of their models are equipped with some of the latest and greatest bells and whistles. So, what does this mean for collision repair technicians when it comes to repairing these vehicles. Let’s see what MBUSA has to say in their revised position statement.

The Mercedes-Benz Diagnostic Repairs Following A Collision position statement lists various technologies used, along with saying how they can be damaged in a collision without the driver being aware that a problem exists.

In the Mercedes-Benz Diagnostic Repairs Following A Collision position statement, it says that MBUSA highly recommends pre-repair scans and says that post-repair scanning is necessary on vehicle models that are 1996 or newer. They give some examples of when a scan is required:

  • Vehicle collisions, regardless of the appearance of damage
  • Windshield replacement for vehicles with driver-assist sensors (including rain/light sensors) located in the windshield
  • Removal and/or replacement of exterior components, bumpers, SRS sensors, park assist sensors, driver-assist system sensors and cameras, wiring harnesses, vehicle control units, seats, or interior trim panels

Mercedes-Benz also, recommend “that all repairs are performed by a certified technician using only Genuine Mercedes-Benz Parts, mechanical components, and electrical components, as well as all safety devices such as airbags and seat belts.”

For the most up-to-date information use Workshop Information Systems (WIS), which is found on the MBUSA repair information website.

You can also view Mercedes-Benz position statements on the RTS website.

For additional Mercedes-Benz information, check out the Mercedes-Benz OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:
ADAS, Calibration, And Scanning Article Hotspot
Pre- and Post-Repair System Scanning Position Statements

Related I-CAR Courses

Course I-CAR ADAS Courses

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Hyundai Does Hyundai have part replacement procedures available?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan Is there a wiring repair procedure for the airbag connector?

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?