Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Structural Sectioning Procedures: Mazda

Structural Sectioning Procedures: Mazda

Posted on 27 April 2017 | Share:
| Print Print

Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.

Parts are made from various materials including HSS, UHSS, aluminum, and carbon fiber. These parts also have complex designs to collapse or transfer collision forces in a specific manner. Introducing a sectioning joint to many of these parts will alter how the part reacts to those collision forces. For this reason, sectioning a part is only allowed if supported by vehicle maker repair information. Let’s see what Mazda says about structural sectioning.

Vehicle-specific Mazda repair manuals offer procedures for sectioning of various parts. However, it is crucial to pay attention to the various Notes and Cautions through the entire procedure. For example, in the Front Side Frame (Partial Cutting) Removal [Panel Replacement] sectioning procedure for the 2022 Mazda CX-9, the caution states, “The cut and joint area indicates the maximum size range of the installation position." This procedure can be found under Bodyshop Manuals ➤ Body and Accessories ➤ Body Structure ➤ Panel Replacement.

The vehicle-specific body repair manual is used to determine the required type of welding and sectioning joint for the repair being performed. Failure to follow OEM procedures will sacrifice the safety and quality of the repair.

Mazda vehicle-specific body repair manual can be found at www.mazdaserviceinfo.com.

For additional Mazda information, check out the Mazda OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses

Course Sectioning Overview

Course Sectioning Scenarios

Course Training and Certification: Steel Sectioning

  • Repairer Driven News: Rivian Updates Door Handle Procedure Sunday, 4 February 2035

    Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.

  • 2025 SkillsUSA National Competition Results Monday, 30 June 2025

    The 2025 SkillsUSA National Leadership and Skills Conference took place on June 26, 2025. Every year I-CAR sends volunteers (virtually in 2021) to judge the collision repair technology competition....

  • Ford/Lincoln Rocker Panel Reinforcement Sectioning Friday, 27 June 2025

    We are often asked, “Can I section this panel?” Let’s take a look at Ford/Lincoln vehicles and sectioning the rocker panel reinforcement.

  • Back-To-Basics: Backside Panel Refinish And Edging Thursday, 26 June 2025

    Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When repairing and refinishing, you might need to refinish the panel's backside and edges.

  • Hyundai Position Statement: Pre- And Post-Repair System Scanning - UPDATE Monday, 23 June 2025

    Hyundai released an updated position statement relating to pre- and post-repair system scanning.

  • App-Based Connected Services Considerations Tuesday, 17 June 2025

    Have you had an experience where the vehicle notified the owner that it was being moved while it was in your repair facility? App-based connected services are available from many vehicle makers and...

  • Digital Key Considerations Tuesday, 17 June 2025

    The intermingling of technology and automobiles continues, with digital key offerings from most vehicle makers. Digital keys utilize smartphone technology to expand vehicle access and owner...

  • Back-To-Basics: Tire Tread Pattern Wednesday, 11 June 2025

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Let’s see how to identify tire tread patterns and their repair considerations.

  • Corrosion Protection Guidelines: Ford/Lincoln - UPDATE Tuesday, 10 June 2025

    A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that, left untreated,...

  • Rivian Restraints Wiring Thursday, 5 June 2025

    The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Rivian's position on this subject.

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
2014 Jeep CherokeeIs there a procedure available for resetting the active headrestt?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Hyundai Does Hyundai have part replacement procedures available?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repair tolerances?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?