Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Back-To-Basics: Shielding Gas

Back-To-Basics: Shielding Gas

Posted on 29 September 2020 | Share:
| Print Print

Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When it comes to shielding gas, there are a few things to keep in mind in order to have a quality weld.

Shielding gas protects the weld from outside elements and air that cause porosity. Without it, the weld is weak and filled with air bubbles and holes and it is not able to penetrate into the panels being welded. The type of gas used depends on the type of metal being welded. For Example:

  • 75% Argon/ 25% CO2 is used for most mild and high-strength steels.
  • Pure Argon is used for aluminum and when silicon bronze wire is being used.

The above are the most common gasses you will see in repair manuals. However, you may also notice that, depending on the OEM, these other types of shielding gasses are listed:

  • Pure CO2
  • 80% Argon/ 20% CO2
  • 82% Argon/ 18% CO2
  • Helium

These are just a few examples of what you may find while searching through a repair manual. Shielding gas requirements may differ from OEM to OEM and depending on where the vehicles are made. If you are unsure of availability of those gasses for the repair, you may want to check with your local distributor or find out if there is a United States equivalent to that gas available.

Always refer to the body repair manual as the OEM may specify what type of gas they require for certain repairs. Using the vehicle maker required welding material, and more specifically shielding gas, helps to ensure a complete, safe, and quality repair.

Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses

Course Aluminum GMA Welding Theory

Course Introduction to MIG Brazing

Course Steel GMA Welding Theory

Course Training and Certification: Aluminum GMA (MIG) Welding

Course Training and Certification: Steel GMA Welding

Course Welding Training and Certification

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
2014 Jeep CherokeeIs there a procedure available for resetting the active headrestt?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Hyundai Does Hyundai have part replacement procedures available?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
What does I-CAR say about the decision to use recycled parts?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about repair tolerances?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?