I-CAR RTS Collision Repair Technical Bulletins

Repairer Driven News: 2020 Chrysler Voyager

Posted on 19 November 2019

Repairer Driven News (RDN) released an article highlighting the return of the Voyager. It will be Chryslers entry level minivan, replacing the Chrysler Pacifica L and LX trims.

3M: Adhesive Cartridges

Posted on 18 November 2019

Shawn Collins from 3M products sat down for a one-on-one discussion on adhesive cartridges. You will find useful information on shelf life, partially used cartridges, expandable foam, and curing issues.

Collision Information Website Access

Posted on 15 November 2019

In case you missed it, there are now articles on how to purchase a subscription from specific OEMs. Why do you need a subscription to an OEM website if you have full access to the I-CAR Repairability Technical Support (RTS) portal?

Ford Collision Report: OE Glass Video

Posted on 15 November 2019

Ford released a video about their fixed glass replacement. The video touches on key areas of glass removal and replacement. This is only an overview, and the vehicle-specific Workshop manual should always be referenced for glass procedures.

Common Mistakes: Emissivity

Posted on 14 November 2019

What is emissivity and why is it important during the repair process? Emissivity is the measure of an objects ability to emit infrared energy. This is important when it comes to monitoring panel temperature with certain tools.

Steel Spot And Plug Weld Nugget Size: Ford/Lincoln - UPDATE

Posted on 13 November 2019

Did you know that some OEMs specify nugget size for spot and plug welds? This information is typically found within vehicle-specific repair procedures or can be found under general welding guidelines. Let’s see what Ford/Lincoln has to say.

Repairer Driven News: A Pipeline Of Talent Camouflaged In Our Military Veterans

Posted on 12 November 2019

Repairer Driven News (RDN) has released two articles highlighting an underutilized resource. That resource could be a pipeline for an industry that is struggling to acquire and retain talent.

Back-To-Basics: Weld Inspection During The Repair Process

Posted on 11 November 2019

Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When it comes to inspecting repairs for quality, there are many things to look for in order to avoid failures throughout the repair process.

I-CAR Collision Reporter - The Talent Issue

Posted on 08 November 2019

The tenth installment of I-CAR Collision Reporter - The Talent Issue has been released. This issue focuses on the challenges the industry is facing with acquiring and retaining talent.

Taking A Closer Look At Bonding, Riveting, And Welding

Posted on 07 November 2019

ABRN recently released an article titled, Taking A Closer Look At Bonding, Riveting, And Welding. The focus of the article is not on the technical aspect, but on the importance of following OEM procedures when performing repairs.

Steel Spot And Plug Weld Nugget Size: FCA/Stellantis - UPDATE

Posted on 06 November 2019

Kia Collision Repair Overview

Posted on 04 November 2019

The Kia Collision Repair Overview course has a lot of information that will help you throughout the repair process. Some information you will find in the course includes:

Back-To-Basics: Aluminum Panel Repair

Posted on 31 October 2019

Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When it comes to deciding whether to repair or replace an aluminum panel, there are a few things to keep in mind.

OEM Linking Pin: Ford/Lincoln Overlap Measurement With Spot Welds

Posted on 30 October 2019

As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. Recently, we had a technical inquiry that asked for clarification on what the panel overlap measurement should be if not specified in the Workshop manual when using squeeze-type resistance spot welding.

Ford/Lincoln: ADAS Collision Report Video

Posted on 29 October 2019

Ford and Lincoln vehicles now come with many advanced driver assistance systems (ADAS). The ADAS Collision Report video goes into detail about these systems, and how important it is that they’re repaired and calibrated correctly.

Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
Pre- and Post-Repair System Scanning Statements Wednesday, 9 January 2019
Are you wondering if a particular OEM or organization has a published statement on pre-repair and post-repair scanning? We have compiled a list of most of the statements on the subject, so you can...
ADAS, Calibration, And Scanning Article Hotspot Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
BMW Position Statement: Pre- and Post-Repair System Scanning - UPDATE Friday, 10 April 2020
BMW has released a position statement related to pre- and post-repair system scanning. The statement applies to All vehicles equipped with on board diagnostics II (OBD II).
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE Wednesday, 22 May 2019
Honda /Acura has updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
Quickly Identifying Outer Quarter Panels w/Rolled Hem Flanges Monday, 5 March 2018
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
General Motors Position Statement: Pre- and Post-Repair System Scanning Friday, 21 October 2016
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
Restraints Wiring Repairs Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning Thursday, 9 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
Typical Calibration Requirements For Forward Radar Sensors Wednesday, 12 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...

Your 2025 Favorites: Top Articles Friday, 16 January 2026
As 2026 rolls in, we can reflect back on what the previous year had to offer. Let's take a look at some of the collision industry information you've been most interested in from this past year....
App-Based Connected Services Considerations: Toyota/Lexus Thursday, 15 January 2026
Have you had the experience where the vehicle notified the owner that it was being moved while it was in your repair facility? App-based connected services are available from many vehicle makers and may...
Digital Key Considerations: Toyota/Lexus Thursday, 15 January 2026
The intermingling of technology and automobiles continues, with digital key offerings from most vehicle makers. Digital keys utilize smartphone technology to expand vehicle access and owner...
Nissan/INFINITI Position Statements: Advanced Driver Assistance System Components Thursday, 8 January 2026
Nissan/INFINITI released position statements on the use of salvaged, aftermarket, and "secondary-market" advanced driver assistance systems (ADAS) components.
I-CAR Repairers Realm: RTS 2025 Year In Review - Now Available Tuesday, 6 January 2026
I-CAR had a discussion on the Repairability Technical Support (RTS) 2025 year in review.
Ford On Target 2025: Volume 4 Monday, 5 January 2026
Ford has released the fourth installment of their On Target publication for 2025.
Structural Sectioning Procedures: Ford/Lincoln - UPDATE Friday, 19 December 2025
Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the...
Body Repair Manual Symbols: Hyundai Wednesday, 17 December 2025
While looking at repair procedures in a body repair manual (BRM) you may notice that symbols are used to indicate specific operations or parts to be used during the repair process. Most BRMs provide a...
Body Repair Manual Symbols: Genesis Wednesday, 17 December 2025
While looking at repair procedures in a body repair manual (BRM) you may notice that symbols are used to indicate specific operations or parts to be used during the repair process. Most BRMs provide a...
App-Based Connected Services Considerations: BMW Wednesday, 10 December 2025
Have you had an experience where the vehicle notified the owner that it was being moved while it was in your repair facility? App-based connected services are available from many vehicle makers and...

2026
- January 2026 (6)

2025
- December 2025 (8)
- November 2025 (11)
- October 2025 (13)
- September 2025 (11)
- August 2025 (12)
- July 2025 (11)
- June 2025 (11)
- May 2025 (11)
- April 2025 (13)
- March 2025 (12)
- February 2025 (11)
- January 2025 (12)

2024
- December 2024 (8)
- November 2024 (10)
- October 2024 (13)
- September 2024 (10)
- August 2024 (12)
- July 2024 (11)
- June 2024 (9)
- May 2024 (13)
- April 2024 (12)
- March 2024 (12)
- February 2024 (12)
- January 2024 (9)

2023
- December 2023 (8)
- November 2023 (12)
- October 2023 (11)
- September 2023 (11)
- August 2023 (12)
- July 2023 (9)
- June 2023 (11)
- May 2023 (12)
- April 2023 (11)
- March 2023 (12)
- February 2023 (10)
- January 2023 (11)

2022
- December 2022 (11)
- November 2022 (12)
- October 2022 (11)
- September 2022 (13)
- August 2022 (11)
- July 2022 (10)
- June 2022 (13)
- May 2022 (11)
- April 2022 (12)
- March 2022 (10)
- February 2022 (11)
- January 2022 (13)

2021
- December 2021 (13)
- November 2021 (11)
- October 2021 (13)
- September 2021 (14)
- August 2021 (12)
- July 2021 (15)
- June 2021 (17)
- May 2021 (11)
- April 2021 (14)
- March 2021 (20)
- February 2021 (14)
- January 2021 (14)

2020
- December 2020 (13)
- November 2020 (17)
- October 2020 (12)
- September 2020 (14)
- August 2020 (11)
- July 2020 (18)
- June 2020 (14)
- May 2020 (14)
- April 2020 (19)
- March 2020 (12)
- February 2020 (13)
- January 2020 (14)

2019
- December 2019 (13)
- November 2019 (19)
- October 2019 (25)
- September 2019 (20)
- August 2019 (22)
- July 2019 (23)
- June 2019 (20)
- May 2019 (19)
- April 2019 (20)
- March 2019 (20)
- February 2019 (18)
- January 2019 (17)

2018
- December 2018 (18)
- November 2018 (19)
- October 2018 (17)
- September 2018 (16)
- August 2018 (21)
- July 2018 (20)
- June 2018 (21)
- May 2018 (17)
- April 2018 (19)
- March 2018 (21)
- February 2018 (15)
- January 2018 (20)

2017
- December 2017 (13)
- November 2017 (15)
- October 2017 (19)
- September 2017 (20)
- August 2017 (19)
- July 2017 (18)
- June 2017 (19)
- May 2017 (18)
- April 2017 (13)
- March 2017 (18)
- February 2017 (10)
- January 2017 (11)

2016
- December 2016 (9)
- November 2016 (14)
- October 2016 (21)
- September 2016 (10)
- August 2016 (11)
- July 2016 (8)
- June 2016 (10)
- May 2016 (5)
- April 2016 (11)
- March 2016 (12)
- February 2016 (10)
- January 2016 (8)

2015
- December 2015 (9)
- November 2015 (6)
- October 2015 (8)
- September 2015 (7)
- August 2015 (11)
- July 2015 (7)
- June 2015 (5)
- May 2015 (7)
- April 2015 (8)
- March 2015 (8)
- February 2015 (9)
- January 2015 (10)

2014
- December 2014 (12)
- November 2014 (7)
- October 2014 (11)
- September 2014 (10)
- August 2014 (9)
- July 2014 (12)
- June 2014 (9)
- May 2014 (12)
- April 2014 (9)
- March 2014 (6)
- February 2014 (1)
- January 2014 (26)

Collision Repair News