Sectioning Joint Configuration Terminology

Posted on 17 September 2015 Print

When it comes to terminology in repair procedures, there is often a great deal of confusion as to what type of sectioning joint is called out in a specific repair procedure. To help end some of that confusion, let's look at the three basic sectioning joints.

An open butt joint joins two pieces of metal that are parallel with each other and butted against each other. Some vehicle makers such as Honda will refer to "cut and join" in the repair procedure. This is the terminology they use for an open butt joint. Often times, open butt joints may be offset from each other, like on a front lower rail where the inner and outer rails are cut at two different locations.

A butt joint with backing joins two pieces nearly butted against each other with a backing piece that is usually the same thickness as the other two pieces. This type of joint requires a gap of about two to three metal thicknesses between the two butted pieces.

Lastly is the lap joint, which uses a fillet weld. A fillet weld is roughly a triangular bead deposited in a corner formed by the fit-up of two pieces of metal. This type of weld may also be called an overlap weld or a lap weld. When used for sectioning joints, a fillet weld is made on two pieces of metal that overlap each other (one on top and one on the bottom).

Related I-CAR Courses

Course Sectioning Overview

Course Sectioning Scenarios

Course Training and Certification: Steel Sectioning

  • I-CAR Just In Time: Cybertruck Tuesday, 11 March 2025

    Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...

  • GM Repair Insights: Winter 2025 Monday, 10 March 2025

    The winter edition of General Motors (GM) Repair Insights magazine is now available.

  • Refinishing Park Assist Sensors: Genesis Friday, 7 March 2025

    Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require...

  • Refinishing Park Assist Sensors: Hyundai Friday, 7 March 2025

    Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require...

  • Structural Straightening: Rivian Wednesday, 5 March 2025

    What should you do when a damaged Rivian comes into your repair facility? Can you measure it? Can it be straightened? What needs to be replaced?

  • Bumper Cover Repair With ADAS: Genesis Thursday, 27 February 2025

    A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS)...

  • Bumper Cover Repair With ADAS: Hyundai - UPDATE Thursday, 27 February 2025

    A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS)...

  • I-CAR Repairers Realm: SATA New Equipment And Technologies - Now Available Wednesday, 26 February 2025

    I-CAR staff discussed recent developments in SATA equipment and technology.

  • Calibration Research Tips: Ford/Lincoln Park Assist Operation Check - UPDATE Thursday, 20 February 2025

    While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by...

  • Honda Has Released The 2026 Passport Body Repair News Wednesday, 19 February 2025

    Honda has released a Body Repair News bulletin for the 2026 Passport. This document contains at-a-glance information for this model.