Mercedes-Benz News
Mercedes-Benz Vehicles On The RTS OEM Calibration Requirements Search
Posted on 4 December 2025Mercedes-Benz models are now listed in the OEM Calibration Requirements Search page on the RTS website. You're going to notice a difference between other vehicle search results and Mercedes-Benz vehicles. Let’s take a look at the reason for the differences.
I-CAR OEM Technical Information Matrix: What Is It, And How Does It Help? UPDATE
Posted on 5 December 2024Do you know which vehicle makers have collision repair information available? Do you know where you can go to find that out?
Repairer Driven News: OEM Specifications For Modern Batteries
Posted on 22 July 2024Repairer Driven News (RDN) released an article highlighting 12-volt and 48-volt mild hybrid battery trends in current and upcoming vehicles.
Child Car Seat Resources For Vehicles With Inflatable Seatbelts
Posted on 12 June 2024Ford and Mercedes-Benz vehicles offer an optional inflatable seat belt for rear outward passengers. This unique safety feature presents challenges when installing a child car seat. Let’s see where to locate information.
OEM ADAS Radar Optimized Color Resources: Mercedes-Benz
Posted on 5 June 2024Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but color formula selection may also be a contributing factor. What resources do repairers have available? Let’s see what Mercedes-Benz has to say.
High-Voltage Vehicle Paint Booth Quick Reference
Posted on 9 April 2024When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.
48-Volt Mild Hybrid Systems: Mercedes-Benz
Posted on 31 January 2024Mild hybrid systems are not new. They were some of the first hybrid vehicles to be put into production. The 48-volt mild hybrid system is now becoming more common among some vehicle makers. What consideration are there for repairing a vehicle equipped with a 48-volt mild hybrid system? Let’s see what Mercedes-Benz has to say.
Identifying The Correct High-Voltage Disable Procedure: Mercedes-Benz
Posted on 13 October 2023When researching Mercedes-Benz vehicles, you may notice multiple procedures for disabling the high-voltage (HV) system. Let’s see why there are multiple high-voltage disable procedures available from Mercedes-Benz.
OEM Emergency Response Guides: Mercedes-Benz - UPDATE
Posted on 5 October 2023Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to webpages that house them, or provides articles with instructions on how to locate them.
One-Time-Use Parts And Fasteners: Mercedes-Benz
Posted on 28 April 2023What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big question is "Where do I find this information?"
Locating OEM-Approved HV Tools: Mercedes-Benz
Posted on 7 March 2023When researching procedures for disabling a high-voltage (HV) vehicle, you may notice that many of the procedures require the use of specific tools. Some of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.
Refinishing Park Assist Sensors: Mercedes-Benz
Posted on 19 January 2023Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require painting to match the vehicle. Vehicle makers often provide information on the painting of new sensors. Some vehicle makers do not recommend refinishing sensors with minor finish damage because excessive paint thickness may adversely affect the operation of the park assist system. However, other vehicle makers allow refinishing and provide guidelines. Let’s see what Mercedes-Benz has to say.
Where Do I Find Other Types Of Information In Mercedes-Benz?
Posted on 23 November 2022Navigating OEM websites can be challenging when searching for collision repair procedures, especially as no two OEM websites are alike. What happens when you need to find other types of repair information, such as, "What needs to be inspected after a supplemental restraints system (SRS) deployment?", or "Does the tire pressure monitoring system (TPMS) require a scan tool or specialty tool?" Let's take a closer look at the Mercedes-Benz website.
Mercedes-Benz: Who Requires Or Recommends MIG Brazing?
Posted on 24 September 2021In Europe, MIG brazing has been required or recommended on a widespread basis for several years. In the U.S., MIG brazing is not as common but is becoming more prevalent. As the RTS team is researching MIG brazing information, we are putting together a series of articles that identify OEM-specific MIG brazing recommendations and requirements for vehicles in the U.S. Let’s see what Mercedes-Benz has to say.
Rivet Guns: Does My Shop Need Them?
Posted on 23 July 2021When performing collision repairs, there are more attachment methods available than ever before. OEMs specify which attachment methods are recommended or required. If a method is not listed as an option, it should not be used.
Steel Spot And Plug Weld Nugget Size: Mercedes-Benz - UPDATE
Posted on 26 May 2021Did you know that some OEMs specify nugget size for spot and plug welds? This information is typically found within vehicle-specific repair procedures or can be found under general welding guidelines. Let’s see what Mercedes-Benz has to say.
Locating ADAS Information: Mercedes-Benz
Posted on 18 May 2021As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.
OEM Emergency Response Guides
Posted on 25 February 2021Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to webpages that house them, or provides articles with instructions on how to locate them.
Who Requires Or Recommends MIG Brazing? UPDATE
Posted on 25 November 2020In Europe, MIG brazing has been required or recommended on a widespread basis for several years. In the U.S., MIG brazing is not as common but is becoming more prevalent. As the RTS team is researching MIG brazing information, we are putting together a series of articles that identify OEM-specific MIG brazing recommendations and requirements for vehicles in the U.S.
Non-SRS Wiring Repairs: Mercedes-Benz
Posted on 17 September 2019What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As technology increases on vehicles, so does the number of components that utilize electricity. Many of the sensors and modules are becoming smarter and more sensitive. If the wire is too long, the wrong gauge, or spliced in the wrong location it can cause malfunctions in the components that it’s powering. Many OEMs have different restrictions and guidelines for repairing wiring that does not control SRS components. On the other hand, there are OEMs that don’t allow wiring repairs at all, so full harness replacement is the only option.
Bumper Cover Repair With ADAS: Mercedes-Benz
Posted on 16 May 2019A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS) utilize sensors behind the bumper covers. The ability for these sensors to be able to see clearly, normally requires special caution when considering a bumper repair. Many OEMs have different levels of warnings when it comes to repairing bumper covers with ADAS. So, what does Mercedes-Benz say on the subject?
ADAS, Calibration, And Scanning Article Hotspot
Posted on 14 January 2019Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s Repairability Technical Support (RTS) team continues to be on the leading edge of research and education. Our goal is to help communicate information to the industry, and a great way to do this is through Collision Repair News articles.
Repairer Driven News: Mercedes-Benz A-Class Sedan
Posted on 26 July 2018The new Mercedes-Benz A-Class sedan is set to arrive later this year. A recent article by Repairer Driven News (RDN) covers many new features the collision repairer industry will need to know.
Additional Calibration Requirements: Mercedes-Benz
Posted on 21 July 2017The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.
Structural Sectioning Procedures: Mercedes-Benz
Posted on 28 June 2017Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.
Corrosion Protection Guidelines: Mercedes-Benz
Posted on 7 June 2017A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that left untreated will lead to corrosion and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealer, adhesives, foam fillers, and cavity waxes. Let’s take a look at what Mercedes-Benz says.
What's That in the Grille?
Posted on 11 May 2017Have you noticed anything different looking on new vehicle grilles? If you have, you may have thought what is that strange looking flat spot? Sometimes this flat area is somewhat hidden by a manufacturer emblem. Other times it’s integrated into the grille itself, including grille lines. Let’s take a look at this new design element and what it’s hiding.
Awareness of Changing Refrigerant Types
Posted on 20 April 2017You may have noticed that A/C refrigerant on many new vehicles has started to change. For many years, OEMs used R134a. However, government mandates require OEMs to phase out R134a by the year 2021. This left OEMs scrambling to find a replacement. Many US OEMs chose to use R1234yf to replace R134a, but there are some OEMs that have chosen a different route. Let’s take look at these new refrigerants.
Weld-Through Primer Guidelines: Mercedes-Benz
Posted on 3 April 2017Weld-through primers are generally a zinc-based product that are applied to the mating surfaces prior to welding. Corroding zinc forms zinc oxide which protects the steel. This is called sacrificial corrosion. For a quality weld to be made it’s required that the weld-through primer be removed from the direct weld zone before welding the joint when GMA welding. Many OEMs have a position on when and how to use weld-through primer or when it shouldn’t be utilized. Let’s see what Mercedes-Benz recommends and where this information can be found.
Battery Disconnect Considerations
Posted on 21 February 2017When a damaged vehicle enters a collision repair facility, many times the repairs require the battery to be disconnected. Operations such as welding, SRS repairs, engine work, and body panels being open for extended periods of time, can all require that the battery be disconnected. At one time the radio presets would be written down before the battery was disconnected and programmed after the battery was reconnected. However, today many OEMs have special precautions or steps that need to be taken when disconnecting the battery. Let’s take a look at what some OEMs require when disconnecting the battery.
Mercedes-Benz Position Statement: Steering Components
Posted on 14 December 2016The steering system on a vehicle could be considered one of the most important and necessary systems on a vehicle. After all, without steering the driver couldn’t control the vehicle. This makes it important to know what the OEM recommends when it comes to this system. Let’s take a look at what MBUSA has to say.
Mercedes-Benz Postion Statement: Genuine Replacement Parts
Posted on 9 December 2016Here at I-CAR we receive a lot of question about the use of aftermarket and recycled parts, when repairing a vehicle after a collision. We are not in the position to tell you what parts you can and cannot use. However, some OEMs publish position statements to give guidance as to what they do and do not permit when selecting which parts to use to restore the vehicle to its pre-collision state. Mercedes-Benz (MBUSA) has released an updated position statement to help answer these question. Let’s see what MBUSA has to say in their revised position statement.
Collision Information Website Access: Mercedes-Benz
Posted on 5 December 2016Why do I need a subscription to an OEM website if I have full subscription access to the I-CAR Repairability Technical Support (RTS) portal? This is a question received on a regular basis through Ask I-CAR. Let’s take a look at why and how to purchase an OEM subscription.
Mercedes-Benz Position Statement: Pre- and Post-Repair System Scanning
Posted on 28 November 2016Mercedes-Benz is known for their use of technology in their vehicles. Many of their models are equipped with some of the latest and greatest bells and whistles. So, what does this mean for collision repair technicians when it comes to repairing these vehicles. Let’s see what Mercedes-Benz has to say.
Mercedes-Benz Glass Replacement Requirements
Posted on 23 November 2016The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.
Mercedes-Benz Collision Position Statements Available
Posted on 23 November 2016There's a new addition to the Mercedes-Benz OEM Information. An icon has been added that will link you to a page containing Mercedes-Benz Position Statements.
Always Follow Vehicle Maker Procedures
Posted on 7 July 2016We often receive Ask I-CAR inquiries asking: “what does I-CAR recommend?” Many times these questions are in regards to sectioning, straightening, or part replacement/attachment methods. Our first response is always:
Restraints Wiring Repairs
Posted on 23 May 2016Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
Mercedes-Benz Restraints Wiring
Posted on 2 May 2016The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Mercedes-Benz position on this subject.
Making Automatic Emergency Braking (AEB) A Standard Feature
Posted on 24 September 2015A group of vehicle makers got together recently and discussed the future of automatic emergency braking (AEB) technology in their vehicles. This feature is designed to reduce the severity and frequency of collisions; but no matter how good it is, it will never prevent all accidents from happening. So what do you need to know in order to repair vehicles with AEB, and how do you know the system is functioning properly?
Step-By-Step: Accessing Mercedes-Benz Repair Information
Posted on 8 June 2015Per your requests, we are adding step-by-step instructions on how to access the vehicle maker repair information to complement our how-to-videos on the OEM Information pages. Easily reference this article by clicking the link under the video on the Mercedes-Benz OEM Information page.
Mercedes-Benz To Have New Model Naming In 2015
Posted on 13 November 2014Mercedes-Benz is revising the vehicle model naming in 2015. For those that are unfamiliar with the different vehicle names this might be a bit confusing. In a recent press release Mercedes-Benz details some of these changes, so lets take a look at the SUVs.
Weld-Through Primer Requirements On The OEM Technical Information Matrix
Posted on 28 August 2014Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The eighth column calls out if the vehicle maker requires the use of weld-through primer on flanges in preparation for welding.
Collision Repair Attachment Methods, Description, And Equipment Requirements Information On The OEM Technical Information Matrix
Posted on 13 August 2014Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The seventh column calls out if the vehicle maker has information in regard to the recommended attachment method and the equipment required for complete, quality, and safe repairs.
Is There a Procedure for Disassembling a Service Assembly?
Posted on 19 June 2014The fourth column in the OEM Technical Information Matrix: Partial Service Part/Assembly Replacement Procedures at Factory Seams, can get a little tricky without further clarification. For the most part, this is a column that I-CAR is still researching published OEM information to get the answers to. The question is: Does the vehicle maker have procedures for replacing a partial service part or assembly at factory seams?
What's A Mercedes-Benz Outer Side Longitudinal Member?
Posted on 30 May 2014When it comes to repair information, vehicle makers use a wide variety of terminology for replacement parts. All of the different names can be confusing, especially when repairing a variety of vehicle makes and models.
Mini News
Bumper Cover Repair With ADAS: BMW/Mini - UPDATE
Posted on 3 February 2026A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS) utilize sensors behind the bumper covers. The ability for these sensors to be able to see clearly, normally requires special caution when considering a bumper repair. Many OEMs have different levels of warnings when it comes to repairing bumper covers with ADAS. So, what does BMW/Mini say on the subject?
I-CAR Repairers Realm: Ford Explorer Rear Rail Sectioning - Now Available
Posted on 26 September 2025I-CAR had a discussion on 2020-2025 Ford Explorer rear rail sectioning.
I-CAR OEM Technical Information Matrix: What Is It, And How Does It Help? UPDATE
Posted on 5 December 2024Do you know which vehicle makers have collision repair information available? Do you know where you can go to find that out?
Non-SRS Wiring Repair: BMW/Mini
Posted on 17 October 2024What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As technology increases on vehicles, so does the number of components that utilize electricity. Many of the sensors and modules are becoming smarter and more sensitive. If the wire is too long, the wrong gauge, or spliced in the wrong location, it can cause malfunctions in the components that it’s powering. Many OEMs have different restrictions and guidelines for repairing wiring that does not control SRS components. On the other hand, there are OEMs that don’t allow wiring repairs at all, so full harness replacement is the only option.
Back-To-Basics: Dirt Nibs In Paint
Posted on 1 August 2024Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. Refinishing defects can take many forms and be influenced by the technician, environment, product selection, or equipment maintenance to name a few. Let’s look at dirt nib inclusion during the refinishing processes.
OEM ADAS Radar Optimized Color Resources: BMW/Mini
Posted on 30 May 2024Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but color formula selection may also be a contributing factor. What resources do repairers have available? Let’s see what BMW/Mini has to say.
OEM Emergency Response Guides: BMW/Mini
Posted on 2 May 2024Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to webpages that house them, or provides articles with instructions on how to locate them.
High-Voltage Vehicle Paint Booth Quick Reference
Posted on 9 April 2024When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.
Straightening And Heat: BMW/Mini
Posted on 24 January 2024A question often asked of the Repairability Technical Support (RTS) team is, "Can heat be used to straighten?" Several OEMs provide steel repairability matrices that provide heating times and temperature limits based on the type of metal being repaired, while other OEMs have restrictions on using heat at all. Let’s see what BMW/Mini has to say.
48-Volt Mild Hybrid Systems: BMW
Posted on 16 November 2023Mild hybrid systems are not new. They were some of the first hybrid vehicles to be put into production. The 48-volt mild hybrid system is now becoming more common among some vehicle makers. What considerations are there for repairing a vehicle equipped with a 48-volt mild hybrid system? Let’s see what BMW has to say.
One-Time-Use Parts And Fasteners: BMW/Mini
Posted on 7 April 2023What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big question is "Where do I find this information?"
Identifying The Correct Body Repair Manual: BMW/Mini
Posted on 26 January 2023Vehicle makers may group their body repair manuals (BRM) in several different ways. Sometimes the BRMs are grouped by a year range, some are listed as VIN specific, and others are arranged by a body code. Let’s take a look at BMW/Mini to see how they group their BRMs.
Locating OEM-Approved HV Tools: BMW/Mini
Posted on 20 January 2023When researching procedures for disabling a high-voltage (HV) vehicle, you may notice that many of the procedures require the use of specific tools. Some of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.
Refinishing Park Assist Sensors: BMW/Mini
Posted on 31 August 2022Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require painting to match the vehicle. Vehicle makers often provide information on the painting of new sensors. Some vehicle makers do not recommend refinishing sensors with minor finish damage because excessive paint thickness may adversely affect the operation of the parkassist system. However, other vehicle makers allow refinishing and provide guidelines. Let’s see what BMW/Mini has to say.
BMW/Mini High-Voltage Technician Levels
Posted on 26 May 2022As electric-only, hybrid, and fuel cell electric vehicles are increasing in sales, they are becoming more commonplace in repair facilities. Along with the unique powertrains that come with these vehicles, also comes unique safety concerns. Regardless of vehicle maker, high-voltage (HV) systems pose a threat of injury or death if not handled properly. Only personnel with the proper training, PPE, tools, equipment, and service information should perform work on the HV systems.
Where Do I Find Other Types Of Information In BMW/Mini?
Posted on 20 May 2021Navigating OEM websites can be challenging when searching for collision repair procedures, especially as no two OEM websites are alike. What happens when you need to find other types of repair information, such as, "What needs to be inspected after a supplemental restraints system (SRS) deployment", or "Does the tire pressure monitoring system (TPMS) require a scan tool or specialty tool?" Let's take a closer look at the BMW/Mini website.
Steel Spot And Plug Weld Nugget Size: BMW/Mini - UPDATE
Posted on 11 March 2021Did you know that some OEMs specify nugget size for spot and plug welds? This information is typically found within vehicle-specific repair procedures or can be found under general welding guidelines.Let’s see what BMW/Mini has to say.
OEM Emergency Response Guides
Posted on 25 February 2021Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to webpages that house them, or provides articles with instructions on how to locate them.
BMW/Mini: Who Requires Or Recommends MIG Brazing?
Posted on 17 February 2021In Europe, MIG brazing has been required or recommended on a widespread basis for several years. In the U.S., MIG brazing is not as common but is becoming more prevalent. As the RTS team is researching MIG brazing information, we are putting together a series of articles that identify OEM-specific MIG brazing recommendations and requirements for vehicles in the U.S. Let’s see what BMW/Mini has to say.
Who Requires Or Recommends MIG Brazing? UPDATE
Posted on 25 November 2020In Europe, MIG brazing has been required or recommended on a widespread basis for several years. In the U.S., MIG brazing is not as common but is becoming more prevalent. As the RTS team is researching MIG brazing information, we are putting together a series of articles that identify OEM-specific MIG brazing recommendations and requirements for vehicles in the U.S.
Calibration Research Tips: BMW/Mini Calibration Information Table
Posted on 20 October 2020While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by year and model, even within a particular make. As the RTS team has been researching these systems, we have been identifying these atypical circumstances. In order to help you better understand them, we are putting together a series of articles that with the repair and calibration of ADAS. Let’s take a closer look at BMW/Mini calibration requirement information.
BMW Position Statement: Pre- and Post-Repair System Scanning - UPDATE
Posted on 10 April 2020BMW has released a position statement related to pre- and post-repair system scanning. The statement applies to All vehicles equipped with on board diagnostics II (OBD II).
ADAS, Calibration, And Scanning Article Hotspot
Posted on 14 January 2019Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s Repairability Technical Support (RTS) team continues to be on the leading edge of research and education. Our goal is to help communicate information to the industry, and a great way to do this is through Collision Repair News articles.
BMW/Mini: Repair Stage 3
Posted on 26 December 2018In this series, we will be highlighting the four different BMW Repair Stages. Though not each of the stages may apply to a particular repair, it is beneficial to familiarize yourself with each. The stages are located in vehicle-specific body repair manuals under 0 Contents of Body, General - Repair Method section (see Figure 1). Let’s take a closer look at the additional information available in Repair Stage 3.
BMW/Mini: Repair Stage 2
Posted on 19 December 2018In this series, we will be highlighting the four different BMW Repair Stages. Though not each of the stages may apply to a particular repair, it is beneficial to familiarize yourself with each. The stages are located in vehicle-specific body repair manuals under 0 Contents of Body, General - Repair Method section (see Figure 1). Let’s take a closer look at the additional information available in Repair Stage 2.
Locating ADAS Information: BMW/Mini
Posted on 18 September 2018As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.
BMW/Mini: Repair Stage 1a
Posted on 16 July 2018In this series, we will be highlighting the four different BMW Repair Stages. Though not each of the stages may apply to a particular repair, it is beneficial to familiarize yourself with each. The stages are located in vehicle-specific body repair manuals under 0 Contents of Body, General - Repair Method section (see Figure 1). Let’s take a closer look at the additional information available in Repair Stage 1a.
BMW/Mini: Importance Of Reading Procedure Hyperlinks
Posted on 28 June 2018When it comes to repair information, no two vehicle makers are the same. Which is why it's critical to understand what you are reading in the repair procedure. Many OEMs provide links within the repair procedure that expand on what needs to be completed. Often, some related procedures may appear missing because they have to be accessed via a link within the main procedure. Let’s take closer look at BMW’s repair procedures.
Additional Calibration Requirements: BMW/Mini
Posted on 17 August 2017The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.
Body Construction And Material Repair Guidelines: BMW/Mini
Posted on 12 July 2017What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair limitations? These are just some of the questions that the RTS team fields on a daily basis.
Structural Sectioning Procedures: BMW/Mini
Posted on 6 June 2017Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.
Corrosion Protection Guidelines: BMW/Mini
Posted on 23 May 2017A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that left untreated will lead to corrosion and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealer, adhesives, foam fillers, and cavity waxes. Let’s take a look at what BMW/Mini says.
BMW/Mini New Repair Site
Posted on 14 March 2017If you have used the BMW/Mini repair information website since the first of the year, you may have noticed a message. This message was stating the BMW/Mini was transitioning from WebISTA to AIR for the delivery platform to find repair information. WebISTA has been removed from the BMW site as of March 1st. Let’s check out the new AIR platform and how to navigate it.
BMW Forward Facing Camera Replacement
Posted on 20 January 2017When advanced driver assistance systems (ADAS) are replaced after an accident, there may be some fine print that you don’t want to overlook. BMW/Mini has some interesting requirements after the KAFAS or forward facing camera is replaced, that the customer needs to be aware of.
Weld-Through Primer Guidelines: BMW/Mini
Posted on 5 January 2017Weld-through primers are generally a zinc-based product that are applied to the mating surfaces prior to welding. Corroding zinc forms zinc oxide which protects the steel. This is called sacrificial corrosion. For a quality weld to be made it’s required that the weld-through primer be removed from the direct weld zone before welding the joint when GMA welding. Many OEMs have a position on when and how to use weld-through primer or when it shouldn’t be utilized. Let’s see what BMW/Mini recommends and where this information is found.
BMW/Mini Glass Replacement Requirements
Posted on 20 October 2016The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.
Collision Information Website Access: BMW/Mini
Posted on 2 October 2016Why do I need a subscription to an OEM website if I have full subscription access to the I-CAR Repairability Technical Support (RTS) portal? This is a question received on a regular basis through Ask I-CAR. Let’s take a look at why and how to purchase an OEM subscription.
Always Follow Vehicle Maker Procedures
Posted on 7 July 2016We often receive Ask I-CAR inquiries asking: “what does I-CAR recommend?” Many times these questions are in regards to sectioning, straightening, or part replacement/attachment methods. Our first response is always:
Restraints Wiring Repairs
Posted on 23 May 2016Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
Step-By-Step: Accessing BMW/Mini Repair Information
Posted on 9 March 2015Per your requests, we are adding step-by-step instructions on how to access the vehicle maker repair information to complement our how-to-videos on the OEM Information pages. Easily reference this article by clicking the link under the video on the BMW OEM Informationpage and/or Mini OEM Information page.
Mini Cooper - What's In A Name?
Posted on 20 February 2015How familiar are you with the model line for Mini? They are all considered Mini Coopers, but there's a little bit more to it than that.
Weld-Through Primer Requirements On The OEM Technical Information Matrix
Posted on 28 August 2014Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The eighth column calls out if the vehicle maker requires the use of weld-through primer on flanges in preparation for welding.
Collision Repair Attachment Methods, Description, And Equipment Requirements Information On The OEM Technical Information Matrix
Posted on 13 August 2014Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The seventh column calls out if the vehicle maker has information in regard to the recommended attachment method and the equipment required for complete, quality, and safe repairs.
Is There a Procedure for Disassembling a Service Assembly?
Posted on 19 June 2014The fourth column in the OEM Technical Information Matrix: Partial Service Part/Assembly Replacement Procedures at Factory Seams, can get a little tricky without further clarification. For the most part, this is a column that I-CAR is still researching published OEM information to get the answers to. The question is: Does the vehicle maker have procedures for replacing a partial service part or assembly at factory seams?
What's A BMW/Mini Engine Support?
Posted on 7 May 2014When it comes to repair information, vehicle makers use a wide variety of terminology for replacement parts. All of the different names can be confusing, especially when repairing a variety of vehicle makes and models.
The Aluminum Difference
Posted on 9 December 2013What's Iowa Got To Do With It?
by Jason Bartanen
We've seen a lot of changes in vehicle technology over the years. With each of these changes come new challenges and new opportunities. When the unibody vehicle was introduced, repair professionals were required to change their approach to collision repair, from damage analysis through the repair process. With the introduction of GMA (MIG) welding, additional requirements for repairs included new training and equipment. And passive restraints systems presented a completely different type of challenge, involving electronics and diagnostics.
Bonding And Rivet Bonding Technology On Steel BMW Vehicle Parts
Posted on 26 April 2012As BMW Groups' vehicle construction technology advances, so does the repair process required to fix them properly. Conventional welding, which has been used primarily in BMW Groups' repair processes in the past, is slowly becoming the secondary method to bonding and rivet bonding technology. BMW currently recommends primarily using bonding and rivet bonding to replace exterior body panels, structural parts, and sectioning specific locations in conjunction with VIN-specific repair procedures. Changes in recommended repair procedures affect all current production models. This does not mean that all models, and all parts, are affected though. Consulting VIN-specific repair procedures should always be the first step in the repair process. The same is true for Mini and for Rolls-Royce vehicles (see Figure 1).
Mitsubishi News
I-CAR OEM Technical Information Matrix: What Is It, And How Does It Help? UPDATE
Posted on 5 December 2024Do you know which vehicle makers have collision repair information available? Do you know where you can go to find that out?
High-Voltage Vehicle Paint Booth Quick Reference
Posted on 9 April 2024When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.
Locating OEM-Approved HV Tools: Mitsubishi
Posted on 19 May 2023When researching procedures for disabling a high-voltage (HV) vehicle, you may notice that many of the procedures require the use of specific tools. Some of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.
Steel Spot And Plug Weld Nugget Size: Mitsubishi - UPDATE
Posted on 26 February 2021Did you know that some OEMs specify nugget size for spot and plug welds? This information is typically found within vehicle-specific repair procedures or can be found under general welding guidelines. Let’s see what Mitsubishi has to say.
OEM Emergency Response Guides
Posted on 25 February 2021Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to webpages that house them, or provides articles with instructions on how to locate them.
Calibration Research Tips: Mitsubishi Rear View Camera Setting
Posted on 4 February 2021While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by year and model, even within a particular make. As the RTS team has been researching these systems, we have been identifying these atypical circumstances. In order to help you better understand them, we are putting together a series of articles that help with the repair and calibration of ADAS. Let’s take a closer look at Mitsubishi rear view camera setting.
Weld-Through Primer Guidelines: Mitsubishi - UPDATE
Posted on 28 January 2021Weld-through primers are generally a zinc-based product that are applied to the mating surfaces prior to welding. Corroding zinc forms zinc oxide which protects the steel. This is called sacrificial corrosion. For a quality weld to be made it’s required that the weld-through primer be removed from the direct weld zone before welding the joint when GMA welding. Many OEMs have a position on when and how to use weld-through primer or when it shouldn’t be utilized. Let’s see what Mitsubishi recommends and where this information can be found.
Where Do I Find Other Types Of Information In Mitsubishi?
Posted on 29 December 2020Navigating OEM websites can be challenging when searching for collision repair procedures, especially as no two OEM websites are alike. What happens when you need to find other types of repair information, such as, "What needs to be inspected after a supplemental restraints system (SRS) deployment?", or "Does the tire pressure monitoring system (TPMS) require a scan tool or specialty tool?" Let’s take a closer look at the Mitsubishi website.
Bumper Cover Repair With ADAS: Mitsubishi
Posted on 21 December 2020A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS) utilize sensors behind the bumper covers. The ability for these sensors to be able to see clearly normally requires special caution when considering a bumper repair. Many OEMs have different levels of warnings when it comes to repairing bumper covers with ADAS. So, what does Mitsubishi say on the subject?
Calibration Research Tips: Mitsubishi Radar Sensor
Posted on 12 November 2020While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by year and model, even within a particular make. As the RTS team has been researching these systems, we have been identifying these atypical circumstances. In order to help you better understand them, we are putting together a series of articles that help with the repair and calibration of ADAS. Let’s take a closer look at the Mitsubishi radar sensor.
Mitsubishi Position: Pre- and Post-Repair System Scanning
Posted on 6 June 2019We often receive the Ask I-CAR inquiry: "Does Mitsubishi have a position statement on pre- and post-repair system scanning? Do they plan on coming out with one?"
ADAS, Calibration, And Scanning Article Hotspot
Posted on 14 January 2019Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s Repairability Technical Support (RTS) team continues to be on the leading edge of research and education. Our goal is to help communicate information to the industry, and a great way to do this is through Collision Repair News articles.
Sectioning and Partial Part Replacement: 2018 Mitsubishi Mirage
Posted on 9 November 2018One of the top technical inquiries received at Ask I-CAR, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2018 Mitsubishi Mirage.
Non-SRS Wiring Repairs: Mitsubishi
Posted on 26 October 2018What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As technology increases on vehicles, so does the number of components that utilize electricity. Many of the sensors and modules are becoming smarter and more sensitive. If the wire is too long, the wrong gauge, or spliced in the wrong location it can cause malfunctions in the components that it’s powering. Many OEMs have different restrictions and guidelines for repairing wiring that does not control SRS components. On the other hand, there are OEMs that don’t allow wiring repairs at all, so full harness replacement is the only option.
Locating ADAS Information: Mitsubishi
Posted on 24 October 2018As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.
Body Construction And Material Repair Guidelines: Mitsubishi
Posted on 5 October 2017What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair limitations? These are just some of the questions that the RTS team fields on a daily basis.
Additional Calibration Requirements: Mitsubishi
Posted on 15 September 2017The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.
Corrosion Protection Guidelines: Mitsubishi
Posted on 14 September 2017A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that left untreated will lead to corrosion and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealer, adhesives, foam fillers, and cavity waxes. Let’s take a look at what Mitsubishi says.
Structural Sectioning Procedures: Mitsubishi
Posted on 14 June 2017Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.
Collision Information Website Access: Mitsubishi
Posted on 7 November 2016Why do I need a subscription to an OEM website if I have full subscription access to the I-CAR Repairability Technical Support (RTS) portal? This is a question received on a regular basis through Ask I-CAR. Let’s take a look at why and how to purchase an OEM subscription.
Mitsubishi Glass Replacement Requirements
Posted on 27 October 2016The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.
Always Follow Vehicle Maker Procedures
Posted on 7 July 2016We often receive Ask I-CAR inquiries asking: “what does I-CAR recommend?” Many times these questions are in regards to sectioning, straightening, or part replacement/attachment methods. Our first response is always:
Restraints Wiring Repairs
Posted on 23 May 2016Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
Mitsubishi Restraints Wiring
Posted on 18 April 2016The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Mitsubishi position on this subject.
Step-By-Step: Accessing Mitsubishi Repair Information
Posted on 30 March 2015Per your requests, we are adding step-by-step instructions on how to access the vehicle maker repair information to complement our how-to-videos on the OEM Information pages. Easily reference this article by clicking the link under the video on the Mitsubishi OEM Information page.
Weld-Through Primer Requirements On The OEM Technical Information Matrix
Posted on 28 August 2014Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The eighth column calls out if the vehicle maker requires the use of weld-through primer on flanges in preparation for welding.
Collision Repair Attachment Methods, Description, And Equipment Requirements Information On The OEM Technical Information Matrix
Posted on 13 August 2014Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The seventh column calls out if the vehicle maker has information in regard to the recommended attachment method and the equipment required for complete, quality, and safe repairs.
Is There a Procedure for Disassembling a Service Assembly?
Posted on 19 June 2014The fourth column in the OEM Technical Information Matrix: Partial Service Part/Assembly Replacement Procedures at Factory Seams, can get a little tricky without further clarification. For the most part, this is a column that I-CAR is still researching published OEM information to get the answers to. The question is: Does the vehicle maker have procedures for replacing a partial service part or assembly at factory seams?
What's A Mitsubishi Rear End Crossmember?
Posted on 13 June 2014When it comes to repair information, vehicle makers use a wide variety of terminology for replacement parts. All of the different names can be confusing, especially when repairing a variety of vehicle makes and models.
Aluminum Roof Replacement On The Mitsubishi Lancer Evolution And Outlander
Posted on 31 March 2010The use of dissimilar metals together in one area of the vehicle structure, and the attachment methods used with those materials, can affect damage analysis and repair versus replace decisions. Two models from Mitsubishi that require these considerations are the Lancer Evolution and Outlander.
Nissan News
OEM ADAS Radar Optimized Color Resources: Nissan - UPDATE
Posted on 20 May 2026Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but color formula selection may also be a contributing factor. What resources do repairers have available? Let’s see what Nissan has to say.
Nissan Position Statement: ARIYA Bumper Refinishing Requirements - UPDATE
Posted on 20 May 2026Nissan has released a collision position statement providing guidelines for refinishing the Nissan ARIYA bumper cover.
Nissan/INFINITI Position Statements: Advanced Driver Assistance System Components
Posted on 8 January 2026Nissan/INFINITI released position statements on the use of salvaged, aftermarket, and "secondary-market" advanced driver assistance systems (ADAS) components.
Nissan/INFINITI Position Statements: Pre- And Post-Repair System Scanning - UPDATE
Posted on 3 November 2025Nissan/INFINITI updated their position statements on pre- and post-repair scanning.
I-CAR Repairers Realm: Top 5 I-CAR RTS Linking Pins Of 2024 - Now Available
Posted on 2 January 2025I-CAR had a discussion on the top 5 I-CAR RTS linking pins of 2024.
I-CAR OEM Technical Information Matrix: What Is It, And How Does It Help? UPDATE
Posted on 5 December 2024Do you know which vehicle makers have collision repair information available? Do you know where you can go to find that out?
OEM Linking Pin: Nissan Maxima/Sentra Outer Quarter Panel - UPDATE
Posted on 2 October 2024We were recently asked: "On a 2017 Nissan Maxima, can I section the outer quarter panel in an area other than what is shown in the body repair manual (BRM)?" To find out the answer, we reached out to our contacts at Nissan.
Nissan Altima Laser-Welded Roof Replacement
Posted on 14 August 2024How do I replace a factory laser-welded roof on a Nissan Altima is a common question. Nissan released a procedure that explains their process, let’s take a look.
Back-To-Basics: Dirt Nibs In Paint
Posted on 1 August 2024Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. Refinishing defects can take many forms and be influenced by the technician, environment, product selection, or equipment maintenance to name a few. Let’s look at dirt nib inclusion during the refinishing processes.
Nissan Wholesale Advantage Website: UPDATE
Posted on 15 July 2024Nissan has a parts website which offers resources for repair professionals.
Calibration Research Tips: Nissan/INFINITI - Bumper Cover Replaced With Sonar Sensor Holder
Posted on 9 May 2024While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by year and model, even within a particular make. As the RTS team has been researching these systems, we have been identifying these atypical circumstances. In order to help you better understand them, we are putting together a series of articles that help with the repair and calibration of ADAS. Let’s take a closer look at Nissan/INFINITI sonar sensor (park assist sensor) replacement.
Repairer Driven News: ADAS Radar Optimized Paint Color Resources
Posted on 12 April 2024Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but color formula selection may also be a contributing factor. What resources do repairers have available? Let’s see what Repairer Driven News (RDN) has available.
High-Voltage Vehicle Paint Booth Quick Reference
Posted on 9 April 2024When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.
OEM Linking Pin: Nissan/INFINITI Outer Uniside Sectioning - Cut Line Clarification
Posted on 3 April 2024As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that asked for clarification on cut line locations for the outer uniside of Nissan/INFINITI vehicles. Specifically, when measurements are not shown within the procedure. We reached out to our contact at Nissan/INFINITI for clarification.
I-CAR Repairers Realm: SEMA: Vehicle-Maker Required Tools and Equipment - Now Available
Posted on 6 December 2023I-CAR had a discussion on vehicle-maker required tools and equipment.
Day One: I-CAR Live From The 2023 SEMA Show
Posted on 1 November 2023Day one of the numerous I-CAR and SCRS interviews and presentations at the 2023 SEMA Show.
OEM-Approved Connector and Pigtail Repair Resources: Nissan/INFINITI
Posted on 31 August 2023When confronted with a wiring harness repair, we often struggle finding the correct connector and pigtail repair kits. Often a specific connector may be used on multiple applications. If the connector is allowed to be replaced, what resources are available to locate approved wiring connector and pigtail repair kits? Let’s see what is available from Nissan/INFINITI.
Steel Spot And Plug Weld Nugget Size: Nissan/INFINITI
Posted on 13 June 2023Did you know that many OEMs specify nugget size for spot and plug welds? This information is typically found within vehicle-specific repair procedures or can be found under general welding guidelines. Let’s see what Nissan/INFINITI has to say.
Repairer Driven News: 2023 Nissan ProPILOT ADAS Features
Posted on 13 February 2023Repairer Driven News (RDN) released an article highlighting Nissan ProPILOT Assist on many 2023 models.
Nissan/INFINITI Restraints Wiring: UPDATE
Posted on 1 February 2023The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Nissan and INFINITI position on this subject.
OEM Linking Pin: Nissan/INFINITI Non-SRS Wiring Repairs - UPDATE
Posted on 1 February 2023As part of the I-CAR Repairability Technical Support (RTS) initiative's OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. Recently we have had several technical inquiries asking about non-SRS wiring repairs on Nissan and INFINITI vehicles. We reached out to Nissan/INFINITI for clarification.
I-CAR 2021 Nissan Rogue Electromechanical Repair And Collision Repair Courses
Posted on 13 January 2023I-CAR has developed courses that overview several features on the 2021 Nissan Rogue, as well as repairability.
2021 Nissan Rogue Trunk Floor Replacement: Reusable Crossmember
Posted on 7 December 2022The 2021-present Nissan Rogue (T33) has a trunk floor sectioning procedure that requires the removal of the rear floor crossmember. Let’s take a look at what Nissan says to do with the crossmember.
Advanced Driver Assistance Systems: 2021 Nissan Rogue
Posted on 22 September 2022While many have noticed that advanced driver assistance systems (ADAS) are showing up on vehicles, there still is confusion on what is required of these systems after a collision occurs. The Ask I-CAR team frequently gets questions in regard to calibration of ADAS. Many of these questions can be answered simply by searching the OEM Calibration Requirements Search. However, there are some questions that may need more details than the calibration search provides. Let’s take a look at the 2021 Nissan Rogue ADAS.
Locating OEM-Approved HV Tools: Nissan/INFINITI
Posted on 7 September 2022When researching procedures for disabling a high-voltage (HV) vehicle, you may notice that many of the procedures require the use of specific tools. Some of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.
Calibration Research Tips: Nissan/INFINITI Module Programming
Posted on 20 June 2022While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by year and model, even within a particular make. As the RTS team has been researching these systems, we have been identifying these atypical circumstances. In order to help you better understand them, we are putting together a series of articles that help with the repair and calibration of ADAS. Let’s take a closer look at Nissan/INFINITI module programming.
Bumper Cover Repair With ADAS: Nissan/INFINITI
Posted on 8 September 2021A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS) utilize sensors behind the bumper covers. The ability for these sensors to be able to see clearly normally requires special caution when considering a bumper repair. Many OEMs have different levels of warnings when it comes to repairing bumper covers with ADAS. So, what does Nissan/INFINITI say on the subject?
Locating OEM-Approved ADAS Tools: Nissan/INFINITI
Posted on 27 May 2021When researching calibration procedures for advanced driver assistance systems (ADAS), you may notice that many of the procedures require the use of specific tools. Some tools may be everyday items like string, tape, levels, paper, etc. However, many of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.
OEM Emergency Response Guides: Nissan/INFINITI
Posted on 3 March 2021Are you looking for OEM emergency response guides (ERGs)? The RTS team has located these guides and either houses them on the Repairability Technical Support (RTS) website, provides links to webpages that house them, or provides articles with instructions on how to locate them.
OEM Emergency Response Guides
Posted on 25 February 2021Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to webpages that house them, or provides articles with instructions on how to locate them.
Nissan High-Voltage Technician Levels
Posted on 19 January 2021As electric-only, hybrid, and fuel cell electric vehicles are increasing in sales, they are becoming more commonplace in repair facilities. Along with the unique powertrains that come with these vehicles, also comes unique safety concerns. Regardless of vehicle maker, high-voltage (HV) systems pose a threat of injury or death if not handled properly. Only personnel with the proper training, PPE, tools, equipment, and service information should perform work on the HV systems.
Who Requires Or Recommends MIG Brazing? UPDATE
Posted on 25 November 2020In Europe, MIG brazing has been required or recommended on a widespread basis for several years. In the U.S., MIG brazing is not as common but is becoming more prevalent. As the RTS team is researching MIG brazing information, we are putting together a series of articles that identify OEM-specific MIG brazing recommendations and requirements for vehicles in the U.S.
Calibration Research Tips: Nissan/INFINITI Action Tests
Posted on 23 June 2020While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by year and model, even within a particular make. As the RTS team has been researching these systems, we have been identifying these atypical circumstances. In order to help you better understand them, we are putting together a series of articles that help with the repair and calibration of ADAS. Let’s take a closer look at Nissan/INFINITI action tests.
Where Do I Find Other Types Of Information In Nissan/INFINITI?
Posted on 17 June 2020Navigating OEM websites can be challenging when searching for collision repair procedures, especially as no two OEM websites are alike. What happens when you need to find other types of repair information, such as, ""What needs to be inspected after a supplemental restraints system (SRS) deployment?", or "Does the tire pressure monitoring system (TPMS) require a scan tool or specialty tool?" Let's take a closer look at the Nissan/INFINITI websites.
Repairer Driven News: 2021 Nissan Rogue
Posted on 16 June 2020Repairer Driven News (DRN) released an article on the 2021 Nissan Rogue. The article focuses on changes to the structure, body, and safety features, including advanced driver assistance systems (ADAS).
Advanced Driver Assistance Systems: 2019 Nissan Murano
Posted on 27 November 2019While many have noticed that advanced driver assistance systems (ADAS) are showing up on vehicles, there still is confusion on what is required of these systems after a collision occurs. The Ask I-CAR team frequently gets questions in regard to calibration of ADAS. Many of these questions can be answered simply by using the OEM Calibration Requirements Search. However, there are some questions that may need more details than the calibration search provides. Let’s take a look at the 2019 Nissan Murano.
Identifying The Correct Body Repair Manual: Nissan/INFINITI
Posted on 22 November 2019Vehicle makers may group their body repair manuals (BRM) in several different ways. Sometimes the BRMs are grouped by a year range, some are listed as VIN specific, and others are arranged by a body code. Let’s take a look at Nissan/INFINITI to see how they group their BRMs.
Nissan Rogue vs. Rogue Sport - Not Just A Different Trim Package
Posted on 5 September 2019At first glance, the Nissan Rogue and Rogue Sport may seem like they are the same vehicle with a different trim package. However, the vehicle structure, body repair manuals (BRM), parts, and procedures are completely different from each other. This is why it is important to make sure the correct manual is selected for repairs.
Sectioning And Partial Part Replacement: 2019 Nissan 370Z
Posted on 1 August 2019One of the top technical inquires received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2019 Nissan 370Z.
Nissan Tech News: March 2019
Posted on 15 April 2019An article in Nissan Tech News highlights different repair methods and procedures used in repairing Nissan vehicles. Nissan Sectioning Repair Tips article discusses reasons why a certain part may not be able to be sectioned, different welding methods, and ways to research and understand the body repair manual. Some reasons sectioning may be prohibited are due to material usage like ultra-high-strength steel (UHSS), panel layering/construction, or if the damage is in a crumple zone.
Nissan Tech News Website Houses Valuable Information
Posted on 11 April 2019Did you know Nissan has a website that houses lots of useful information for collision repair technicians? Conveniently, this website is free to sign up for, and after logging in, you have access to a wide variety of information on Nissan vehicles.
I-CAR 360: 2018 Nissan LEAF Video Now Available
Posted on 7 February 2019I-CAR has a newly released 360 video with an overview of the new, full electric 2018 Nissan LEAF!
I-CAR 2018 Nissan LEAF Technologies And Repair Considerations Course
Posted on 28 January 2019The Nissan LEAF is among the increasing number of vehicles on the road with advanced driver assistance systems (ADAS). With this increase of technology, comes the need to learn about these systems. Let’s take a look at some of the areas that will be covered by the I-CAR Nissan LEAF Technologies and Repair Considerations course.
ADAS, Calibration, And Scanning Article Hotspot
Posted on 14 January 2019Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s Repairability Technical Support (RTS) team continues to be on the leading edge of research and education. Our goal is to help communicate information to the industry, and a great way to do this is through Collision Repair News articles.
Nissan/INFINITI Position Statements Available: UPDATE
Posted on 14 January 2019There's a new addition to the OEM Information page for Nissan/INFINITI. Nine new and revised position statements have been released for each manufacturer that are now available for viewing on the I-CAR RTS website.
Nissan/INFINITI Position Statement: Single-Use Parts Replacement
Posted on 14 January 2019It is often asked, can this fastener, clip, or part be reused? How can we tell if it can or cannot be reused?
OEM Linking Pin: Nissan Rogue Liftgate Clarification
Posted on 5 December 2018As the industry continues to ask about servicing the Nissan Rogue liftgate, we reached out to Nissan and they provided us with this letter as their answer.
Sectioning and Partial Part Replacement: 2018 Nissan Kicks
Posted on 13 November 2018One of the top technical inquires received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2018 Nissan Kicks.
Locating ADAS Information: Nissan/INFINITI
Posted on 22 August 2018As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.
Nissan/INFINITI Updated Manuals To Electronic Service Manual (ESM)
Posted on 8 May 2018Nissan/INFINITI has a new Electronic Service Manual (ESM) for service information on many 2017 and 2018 models. This also includes the Body Repair Manual (BRM). Let's take a look at the new ESM for Nissan/INFINITI.
Sectioning and Partial Part Replacement: 2017 Nissan Maxima
Posted on 4 May 2018One of the top technical inquiries received at Ask I-CAR, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2017 Nissan Maxima.
When ADAS Can't See: Front/Rear Cross Traffic Systems
Posted on 8 January 2018Collision repairs on vehicles equipped with advanced driver assistance systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair, may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.
When ADAS Can't See: Blind Spot Monitoring System
Posted on 22 December 2017Collision repairs on vehicles equipped with advanced driver assistance systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.
Repairer Driven News: Navigating Nissan Service Manuals
Posted on 15 December 2017An article by Repairer Driven News (RDN), talks about a new navigation video for Nissan repair information. Let’s take a look at this video.
Body Construction And Material Repair Guidelines: Nissan/INFINITI
Posted on 20 September 2017What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair limitations? These are just some of the questions that the RTS team fields on a daily basis.
Repairer Driven News: 2018 Nissan Armada Platinum Rearview Mirror
Posted on 7 September 2017New features continued be to offered and the versatile rearview mirror option on the 2018 Nissan Armada is no exception. Let’s take a look at the article as reported by Repairer Driven News (RDN).
Additional Calibration Requirements: Nissan/INFINITI
Posted on 9 August 2017The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.
Corrosion Protection Guidelines: Nissan/INFINITI
Posted on 13 July 2017A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that left untreated will lead to corrosion and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealer, adhesives, foam fillers, and cavity waxes. Let’s take a look at what Nissan/INFINITI says.
Structural Sectioning Procedures: Nissan/INFINITI
Posted on 15 May 2017Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.
Weld-Through Primer Guidelines: Nissan
Posted on 23 March 2017Weld-through primers are generally a zinc-based product that are applied to the mating surfaces prior to welding. Corroding zinc forms zinc oxide which protects the steel. This is called sacrificial corrosion. For a quality weld to be made it’s required that the weld-through primer be removed from the direct weld zone before welding the joint when GMA welding. Many OEMs have a position on when and how to use weld-through primer or when it shouldn’t be utilized. Let’s see what Nissan recommends and where this information can be found.
OEM Linking Pin: Nissan Blind Spot Warning Clarification
Posted on 8 March 2017We recently posted a position statement from Nissan regarding bumper repairs on vehicles equipped with Blind Spot Warning System. There was some uncertainty around some of the wording, so we reached out to Nissan to get some clarification on what the statement meant. Let’s take a look at what we found out.
Nissan Position Statement: Blind Spot Warning (BSW) Precautions
Posted on 23 February 2017Nissan released a new position statement addressing the repairability of a damaged rear bumper cover on vehicles equipped with Blind Spot Warning (BSW). Let’s take a look at what is included in this position statement.
Battery Disconnect Considerations
Posted on 21 February 2017When a damaged vehicle enters a collision repair facility, many times the repairs require the battery to be disconnected. Operations such as welding, SRS repairs, engine work, and body panels being open for extended periods of time, can all require that the battery be disconnected. At one time the radio presets would be written down before the battery was disconnected and programmed after the battery was reconnected. However, today many OEMs have special precautions or steps that need to be taken when disconnecting the battery. Let’s take a look at what some OEMs require when disconnecting the battery.
Collision Information Website Access: Nissan/INFINITI
Posted on 21 November 2016Why do I need a subscription to an OEM website if I have full subscription access to the I-CAR Repairability Technical Support (RTS) portal? This is a question received on a regular basis through Ask I-CAR. Let’s take a look at why and how to purchase an OEM subscription.
Nissan/INFINITI Glass Replacement Requirements
Posted on 22 September 2016The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.
Nissan Position Statement: Power Window Servicing Post-Repair
Posted on 11 August 2016The power windows on Nissan vehicles are now equipped Auto-Up Operation and Anti-Reverse features. Let’s take a look at Nissan’s position on when these features need to be initialized.
Nissan Position Statement: Seat Belt Replacement Considerations
Posted on 2 August 2016Seat belts are an essential safety feature for occupants of a vehicle. Let’s take a look at Nissan’s position statement regarding seat belt replacement guidelines.
Nissan Position Statement: Calibration of Around View Monitor
Posted on 19 July 2016Cameras, cameras, cameras! Nissan’s Around View Monitor system can be found on many of their vehicles. These cameras are located in the front, rear, and both sides of the vehicle. Let’s take a look at Nissan’s position on when calibration is required.
Nissan Position Statement: Required Radar Recalibration Post-Repair
Posted on 13 July 2016As part of Nissan’s “Safety Shield Technology” many vehicles are equipped with a front radar sensor. Let’s take a look at Nissan’s position on when calibration is required for the radar sensor.
Always Follow Vehicle Maker Procedures
Posted on 7 July 2016We often receive Ask I-CAR inquiries asking: “what does I-CAR recommend?” Many times these questions are in regards to sectioning, straightening, or part replacement/attachment methods. Our first response is always:
Restraints Wiring Repairs
Posted on 23 May 2016Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
OEM Linking Pin: Nissan Plastic Liftgate Repairability
Posted on 8 April 2016The 2014-23 Nissan Rogue (BRM T32) and the 2009-14 (BRM Z51) Nissan Murano both have a plastic liftgate with limited repairability. Let's take a look at your options.
OEM Linking Pin: Nissan Exposed Seam Sealer
Posted on 8 May 2015Check out the quarter panel on this 2015 Nissan NV. That's a vertical line of exposed seam sealer from the OEM. It can be found on the 2500 and 3500 versions of this vehicle dating back to model year 2013. Seam sealer isn't normally exposed like this on the exterior of the vehicle, so what do you do with it if you have to replace it?
Step-By-Step: Accessing Nissan Repair Information
Posted on 5 May 2015Per your requests, we are adding step-by-step instructions on how to access the vehicle maker repair information to complement our how-to-videos on the OEM Information pages. Easily reference this article by clicking the link under the video on the Nissan OEM Information page.
Bumper Energy Absorbers, Crush Boxes, and Bumper Reinforcements
Posted on 28 February 2015Let's go back to basics with the ever-popular what to do with bumper energy absorbers, crush boxes, and bumper reinforcements.
Today’s Advanced Vehicles Require Changes in Collision Repair Attachment Methods - Part 1
Posted on 20 December 2014This article originally appeared in the November/December edition of Fixed Ops Magazine.
Collision repair professionals are no different than any other professional – we are resistant to change. It took many years for repairers to make the switch to “MIG welding” for welding early unibody vehicles. (For this article we’ll use the term gas metal arc welding (GMAW) metal inert gas (MIG), or GMA (MIG)). (More on the reason, later.) It was a technology that was unfamiliar to many and there wasn’t a perceived need for change. History would prove otherwise, as there may not be a collision repair business in the country that doesn’t have a GMA (MIG) welder.
What's An INFINITI Rear Side Member Extension?
Posted on 29 October 2014When it comes to repair information, vehicle makers use a wide variety of terminology for replacement parts. All of the different names can be confusing, especially when repairing a variety of vehicle makes and models.
Nissan Releases Caring For Matte Paint Finish Bulletin
Posted on 17 October 2014We've added the 2015 Nismo GRT; Caring For And Repairing Matte Paint Finish service bulletin from Nissan North America that addresses caring for and repairing matte paint finish.
Repair or Replace? – Material Tensile Strength Key to Repairability
Posted on 23 September 2014Repair or Replace? – Material Tensile Strength Key to Repairability
Jason Bartanen, I-CAR Director, Industry Technical Relations
The world of steels continues to evolve at a rapid pace and repair professionals need to keep up. In order to perform complete, safe, and quality repairs, it’s imperative to identify the type of material we’re working with, to know what is repairable, and know which options we have for part replacement when straightening is not an option.
Weld-Through Primer Requirements On The OEM Technical Information Matrix
Posted on 28 August 2014Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The eighth column calls out if the vehicle maker requires the use of weld-through primer on flanges in preparation for welding.
Collision Repair Attachment Methods, Description, And Equipment Requirements Information On The OEM Technical Information Matrix
Posted on 13 August 2014Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The seventh column calls out if the vehicle maker has information in regard to the recommended attachment method and the equipment required for complete, quality, and safe repairs.
It's Not Just About Aluminum
Posted on 30 July 2014Today's Vehicles Require Updated Collision Repair Tools And Training
by Jason Bartanen
Ever since the unveiling of the 2015 Ford F-150 at the North American International Auto Show in Detroit in January, the U.S. automotive industry has been buzzing about this game changing, aluminum intensive vehicle.
Is There a Procedure for Disassembling a Service Assembly?
Posted on 19 June 2014The fourth column in the OEM Technical Information Matrix: Partial Service Part/Assembly Replacement Procedures at Factory Seams, can get a little tricky without further clarification. For the most part, this is a column that I-CAR is still researching published OEM information to get the answers to. The question is: Does the vehicle maker have procedures for replacing a partial service part or assembly at factory seams?
What's A Nissan Rear Side Member Extension?
Posted on 1 April 2014When it comes to repair information, vehicle makers use a wide variety of terminology for replacement parts. All of the different names can be confusing, especially when repairing a variety of vehicle makes and models.
Working With Boron-Alloyed Steel - What's In A Name? (UHSS)
Posted on 26 March 2014Vehicle makers each have their own way of organizing their repair information. The names of the materials and even the names of different parts of vehicles may vary.
OEM Linking Pin: Nissan 370Z Roof Panel Replacement
Posted on 19 March 2014The roof panel on the 2013 Nissan 370Z is laser-welded along the roof-to-side panel mating flange from the factory. Through a routine technical inquiry from a collision repair facility, the I-CAR Repairability Technical Support team was asked if a Nissan procedure existed for replacing the roof panel.
*Results are compiled from matches in OEM Partial Part Replacement, OEM Restraints System Part Replacement, and OEM Hybrid and Electric Vehicle Disable. Use the search bar at the top of the page to find relevant Collision Repair News articles.
What does the vehicle maker say?
The information that matters.
Does it need to be calibrated?
Can that part be sectioned?
What parts need to be replaced?
Where's the high-voltage disable procedure?
What are the OEM glass requirements?
What's the best practice for repairs?
How do you navigate the RTS portal?
Have a collision repair question?