Corrosion Protection Guidelines: Tesla

A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that left untreated will lead to corrosion and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection, throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealers, adhesives, foam fillers, and cavity waxes. Let's take a look at what Tesla says.

Corrosion protection guidelines are in: General Information ➤ Performing A Structural Repair On A Tesla Vehicle ➤ Post Repair Operations.

Per the Post Repair Operations document:

"After a structural repair has been completed, apply an anti-corrosion coating to all bare metal parts of the vehicle body structure and any metal fasteners used in the structural repair. After the vehicle has been refinished, apply an anti-corrosion coating inside body cavities with a 360-degree spray wand of suitable length via factory access holes in the vehicle structure.

Suitable anti-corrosion coatings include:

  • Epoxy-based primers designed for automotive collision repair applications.
  • Approved structural adhesive (in the immediate vicinity of repair areas).
  • Cavity wax designed for automotive collision repair applications.

Note: For information on the proper application of the product, refer to the technical specifications and manufacturer's instructions for the corrosion protection product being used."

Tesla provides guidelines for material selection under vehicle-specific Collision Repair Procedures ➤ Approved Parts, Tools And Supplies. The following categories are where you find recommended seam sealers, structural adhesives, foams and refinishing product systems:

  • Approved Adhesives, Urethane Sealants, and Foam Products
  • Paint Systems That Meet Tesla Warranty Requirements

Always follow OEM repair procedures for all repairs. Failure to follow corrosion protection guidelines can lead to premature failure on a repair. Using the proper corrosion protection will ensure a complete, safe, and quality repair.

For additional Tesla information, check out the Tesla OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:


Related I-CAR Courses

  • Corrosion Protection Guidelines: Ford/Lincoln - UPDATE Monday, 4 February 2036

    A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that, left untreated,...

  • Repairer Driven News: Rivian Updates Door Handle Procedure Sunday, 4 February 2035

    Repairer Driven News (RDN) released an article featuring an updated Rivian procedure.

  • Back-To-Basics: Tire Tread Pattern Wednesday, 11 June 2025

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Let’s see how to identify tire tread patterns and their repair considerations.

  • Rivian Restraints Wiring Thursday, 5 June 2025

    The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Rivian's position on this subject.

  • Non-SRS Wiring Repairs: Rivian Thursday, 5 June 2025

    What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As...

  • High-Voltage Handling And Storage Considerations: Mazda Wednesday, 4 June 2025

    High-voltage (HV) vehicles have some special considerations for handling and storing HV batteries and other components. The dangers of HV batteries are potential even after removal which is why...

  • I-CAR Repairers Realm: Lateral Tension Dent Removal - Now Available Wednesday, 28 May 2025

    I-CAR had a discussion on KECO tools for lateral tension dent removal.

  • I-CAR Just In Time: Proper Tire Mounting Tuesday, 27 May 2025

    Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...

  • Step-By-Step: Submitting ALLDATA Library Request Friday, 23 May 2025

    Per your requests, here are the step-by-step instructions for submitting a library request in ALLDATA.

  • Back-To-Basics: Weldable Seam Sealer Thursday, 22 May 2025

    Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When researching some OEM body repair manuals (BRMs), you may find callouts for the use of...