Scion No More In 2017
- Posted on 03 February 2016
Starting in 2017, Toyota will discontinue the Scion brand. Here's what they are looking at doing.
Sectioning Reinforcements
- Posted on 02 February 2016
When it comes to sectioning reinforcements, there are a few things to keep in mind. Let's take a look at the considerations around this topic.
Mazda Restraints Wiring
- Posted on 28 January 2016
The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Mazda's position on this subject.
Don't Forget the Corrosion Protection
- Posted on 22 January 2016
Just because you can't see it, doesn't mean you don't need it. Think inside pillars, inside rocker panels, inside rails, in the bottom of door shell cavities, and on the backsides of panels. Can you name the corrosion protection material that is often overlooked?
What Is ALLDATA?
- Posted on 20 January 2016
ALLDATA started as a one-stop location for all vehicle makers' service information, but has expanded in recent years into offering collision repair information. So where do the repair procedures come from on ALLDATA?
SkillsUSA State Competitions Need Your Help
- Posted on 15 January 2016
For those of you who don't know what SkillsUSA does, here is your opportunity to meet your next great employee or to give back to the industry. This is a competition for skilled trades, and they can use your help.
Your 2015 Favorites: Searches
- Posted on 08 January 2016
What better way to start off the new year than to take a look at some of your favorite things from the previous year. Let's wrap up with your favorite searches.
Your 2015 Favorites: Questions
- Posted on 06 January 2016
What better way to start off the new year than to take a look at some of your favorite things from the previous year. Let's take a look at your favorite Ask I-CAR questions.
Your 2015 Favorites: Articles
- Posted on 05 January 2016
What better way to start off the new year than to take a look at some of your favorite things from the previous year. Let's start with your favorite articles.
Your 2015 Favorites
- Posted on 05 January 2016
What better way to start off the New Year than to take a look at some of your favorite things from the previous year? Let's recap 2015 by reviewing some of your favorite searches, questions and articles last year on the I-CAR Repairability Technical Support Portal.
If You Need Help, Just Ask
- Posted on 30 December 2015
If you are having a problem with a vehicle, a class, or a website, chances are we can help.
Who Can Help You At I-CAR
- Posted on 29 December 2015
When you have a problem and are looking for help, who should you contact at I-CAR? Well that depends on what you need. People that come to I-CAR fall into two categories, those looking for help on training related questions, and those looking for help on repair related questions. Luckily for you, I-CAR has a team dedicated to each category. Let's take a look at each.
Step-By-Step: Accessing ALLDATA Collision Information
- Posted on 23 December 2015
Per your requests, here is the how-to-video and the step-by-step instructions on how to access the collision repair information in ALLDATA.
Adaptive Cruise Control Overview: Dodge Challenger
- Posted on 21 December 2015
How do you know if a 2015 or newer Dodge Challenger is equipped with adaptive cruise control (ACC)? Look for a small hole in the lower grille (Figure 1). So what does that mean for collision repair?
Collision Repair Diagnostics - The Next Essential Collision Repair Process
- Posted on 18 December 2015
Article originally appeared in Repairer Driven News on December 17, 2015
By Steve Marks
Would you ever attempt to repair a late-model collision-damaged vehicle without three-dimensional measuring? Of course you wouldn’t. Without measuring, it isn’t possible to determine the extent of damage, or to identify hidden damage – which can impact the safety of drivers and passengers in future accidents.
Yet, every day, many vehicles are returned to owners with hidden damage because according to technicians, “There isn’t a warning lamp illuminated on the dash.”
-
Pre- and Post-Repair System Scanning Position Statements
Wednesday, 9 January 2019
Are you wondering if a particular OEM or organization has a published position statement on pre-repair and post-repair scanning? We have compiled a list of most of the position statements on the...
-
Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning
Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
-
ADAS, Calibration, And Scanning Article Hotspot
Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
-
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE
Wednesday, 22 May 2019
Honda /Acura have updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
-
Restraints Wiring Repairs
Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
-
Typical Calibration Requirements For Blind Spot Sensors
Wednesday, 19 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
-
Typical Calibration Requirements For Forward Radar Sensors
Wednesday, 12 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
-
General Motors Position Statement: Pre- and Post-Repair System Scanning
Friday, 21 October 2016
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
-
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning
Thursday, 9 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
-
MIG Brazing What Is It, Why Should I Use It?
Monday, 2 June 2014
Why MIG Brazing? It is widely known that GMA welded; fully galvanized steel will lose some of its properties, including corrosion protection, due to the heat created during welding. OEMs are...
-
OEM Linking Pin: Subaru Solterra Body Repair Manual
Tuesday, 26 March 2024
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that...
-
GM Repair Insights: Winter 2024
Wednesday, 20 March 2024
The winter edition of General Motors (GM) Repair Insights magazine is now available.
-
GM Repair Insights: Fall 2023
Wednesday, 20 March 2024
The fall edition of General Motors (GM) Repair Insights magazine has recently been made available.
-
GM Repair Insights: Summer 2023
Wednesday, 20 March 2024
The summer edition of General Motors (GM) Repair Insights magazine has recently been made available.
-
Paint Maker ADAS Radar Optimized Color Resources
Wednesday, 13 March 2024
Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. Paint film thickness not only may affect the performance of ADAS radars, color...
-
Paint Maker ADAS Radar Optimized Color Resources: Axalta
Wednesday, 13 March 2024
Changes in advanced driver assistance systems (ADAS) radar technology are introducing new; refinishing considerations. Paint film thickness not only may affect the performance of ADAS radars, color...
-
BMW iX SUV Quarter Panel Replacement
Tuesday, 12 March 2024
Carbon fiber structures offer new challenges for repairers. Let’s see one of the ways BMW addresses this on the outer quarter panel repair procedures for the iX SUV.
-
I-CAR Just In Time: Remove Coatings During Sectioning
Friday, 8 March 2024
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
-
OEM Linking Pin: RAM Running Board Mounting Location Repairability
Wednesday, 6 March 2024
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. Ask I-CAR had a few technical...
-
I-CAR Repairers Realm: ADAS Calibrations After Wheel Alignment - Now Available
Tuesday, 5 March 2024
I-CAR had a discussion on advanced driver assistance systems (ADAS) calibrations after a wheel alignment.
- 2024
- March 2024 (11)
- February 2024 (12)
- January 2024 (10)
- 2023
- December 2023 (8)
- November 2023 (13)
- October 2023 (11)
- September 2023 (11)
- August 2023 (12)
- July 2023 (9)
- June 2023 (12)
- May 2023 (12)
- April 2023 (11)
- March 2023 (12)
- February 2023 (10)
- January 2023 (11)
- 2022
- December 2022 (11)
- November 2022 (12)
- October 2022 (11)
- September 2022 (13)
- August 2022 (11)
- July 2022 (10)
- June 2022 (13)
- May 2022 (11)
- April 2022 (12)
- March 2022 (10)
- February 2022 (11)
- January 2022 (13)
- 2021
- December 2021 (13)
- November 2021 (12)
- October 2021 (13)
- September 2021 (15)
- August 2021 (12)
- July 2021 (15)
- June 2021 (17)
- May 2021 (14)
- April 2021 (14)
- March 2021 (21)
- February 2021 (15)
- January 2021 (14)
- 2020
- December 2020 (13)
- November 2020 (17)
- October 2020 (12)
- September 2020 (14)
- August 2020 (11)
- July 2020 (18)
- June 2020 (16)
- May 2020 (14)
- April 2020 (20)
- March 2020 (12)
- February 2020 (14)
- January 2020 (14)
- 2019
- December 2019 (13)
- November 2019 (19)
- October 2019 (25)
- September 2019 (20)
- August 2019 (22)
- July 2019 (23)
- June 2019 (21)
- May 2019 (19)
- April 2019 (20)
- March 2019 (21)
- February 2019 (21)
- January 2019 (18)
- 2018
- December 2018 (19)
- November 2018 (19)
- October 2018 (17)
- September 2018 (16)
- August 2018 (21)
- July 2018 (20)
- June 2018 (21)
- May 2018 (17)
- April 2018 (19)
- March 2018 (22)
- February 2018 (16)
- January 2018 (20)
- 2017
- December 2017 (13)
- November 2017 (15)
- October 2017 (19)
- September 2017 (20)
- August 2017 (20)
- July 2017 (18)
- June 2017 (23)
- May 2017 (20)
- April 2017 (14)
- March 2017 (18)
- February 2017 (11)
- January 2017 (13)
- 2016
- December 2016 (9)
- November 2016 (14)
- October 2016 (21)
- September 2016 (11)
- August 2016 (11)
- July 2016 (8)
- June 2016 (13)
- May 2016 (10)
- April 2016 (11)
- March 2016 (12)
- February 2016 (11)
- January 2016 (8)
- 2015
- December 2015 (9)
- November 2015 (8)
- October 2015 (9)
- September 2015 (7)
- August 2015 (11)
- July 2015 (10)
- June 2015 (8)
- May 2015 (8)
- April 2015 (9)
- March 2015 (8)
- February 2015 (9)
- January 2015 (10)
- 2014
- December 2014 (12)
- November 2014 (7)
- October 2014 (11)
- September 2014 (10)
- August 2014 (9)
- July 2014 (12)
- June 2014 (9)
- May 2014 (14)
- April 2014 (9)
- March 2014 (6)
- February 2014 (1)
- January 2014 (27)