Working With Boron-Alloyed Steel - Attachment GMA Welding
- Posted on 07 August 2014
When GMA welding ultra-high-strength steel (UHSS), like boron-alloyed steel, there are a few additional things to consider. Most UHSS parts are typically replaced using squeeze-type resistance spot welds (STRSW) at a factory seam and GMA plug welds used to attach the part where a spot welder cannot reach.
What's An Audi Front Longitudinal Member?
- Posted on 06 August 2014
When it comes to repair information, vehicle makers use a wide variety of terminology for replacement parts. All of the different names can be confusing, especially when repairing a variety of vehicle makes and models.
What Shielding Gas Do I Need?
- Posted on 01 August 2014
The type of shielding gas that should be used depends on the metal being welded. A mixture of 75% argon and 25% CO2 is the recommended shielding gas for collision repair on mild and high-strength steels. Pure argon is used for welding aluminum and when welding steel with silicon bronze wire.
OEM Partial Parts Replacement Search Update - Dodge Dart
- Posted on 31 July 2014
Information for the Dodge Dart has been updated on the OEM Partial Parts Replacement Search. The collision repair information is currently available on the FCA/Stellantis pay site at stellantisiop.com
It's Not Just About Aluminum
- Posted on 30 July 2014
Today's Vehicles Require Updated Collision Repair Tools And Training
by Jason Bartanen
Ever since the unveiling of the 2015 Ford F-150 at the North American International Auto Show in Detroit in January, the U.S. automotive industry has been buzzing about this game changing, aluminum intensive vehicle.
What's A Kia Fender Apron Upper Panel?
- Posted on 29 July 2014
When it comes to repair information, vehicle makers use of a wide variety of terminology for replacement parts. All of the different names can be confusing, especially when repairing a variety of vehicle makes and models.
OEM Technical Information Matrix - Kia Update
- Posted on 24 July 2014
The OEM Technical Information Matrix has been updated to include Kia information. The corresponding, Collision Repair Information Availability chart has also been updated on the Kia-specific OEM Information page.
OEM Linking Pin: Kia Releases Collision Repair Manuals For Additional Models
- Posted on 21 July 2014
Kia Motors has released comprehensive collision repair manuals for most of their vehicles, in the United States!
Sectioning Information on the OEM Technical Information Matrix
- Posted on 18 July 2014
Let's continue our breakdown of the columns in the OEM Technical Information Matrix. The fifth and sixth columns call out sectioning of two different areas. The fifth column is Structural Sectioning Procedures including front or rear rails. The sixth column is Outer Body Panel Sectioning Procedures including outer unisides and quarter panels.
What's A Jaguar Fender Apron Panel?
- Posted on 17 July 2014
When it comes to repair information, vehicle makers use a wide variety of terminology for replacement parts. All of the different names can be confusing, especially when repairing a variety of vehicle makes and models.
Working With Boron-Alloyed Steel - Removal (Plasma Arc Cutting)
- Posted on 16 July 2014
With so much boron-allowed steel, does a plasma arc cutter even belong in a modern collision repair facility? The simple answer is yes but in limited areas, and it should be used at the lowest setting that can still effectively cut the material.
GM Has New Front Full-Frame Sectioning (Heavy Duty) Part Kit Available
- Posted on 10 July 2014
General Motors released a new full-frame sectioning kit for the front frame rails on 2011 - current 2500/3500 GMC Sierra and 2500/3500 Chevrolet Silverado. A similar kit has been available for the light-duty pickups, but this new part kit is specific to the heavy-duty pickups.
OEM Technical Information Matrix - Volvo Update
- Posted on 09 July 2014
The OEM Technical Information Matrix has been updated to include Volvo information. The corresponding, Collision Repair Information Availability chart has also been updated on the Volvo-specific OEM Information page.
2015 Ford Mustang to Employ Extensive Use of HSS & UHSS
- Posted on 08 July 2014
Earlier this year, at Great Designs in Steel 2014, Ford shared details about the construction of the 2015 Ford Mustang. The 2015 Mustang will use a variety of different steels, from mild to ultra-high-strength (UHSS), throughout the vehicle structure.
To Each Their Own - OEM-Specific Pages
- Posted on 03 July 2014
More great things have been added with the launch of the new website. Each OEM, or vehicle maker, now has their own web page. You are able to access an OEM-specific page by clicking on their emblem. There are a variety of types of information available for each OEM. The icons will link you the following OEM-specific types of information:
-
Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning
Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
-
Pre- and Post-Repair System Scanning Position Statements
Wednesday, 9 January 2019
Are you wondering if a particular OEM or organization has a published position statement on pre-repair and post-repair scanning? We have compiled a list of most of the position statements on the...
-
ADAS, Calibration, And Scanning Article Hotspot
Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
-
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE
Wednesday, 22 May 2019
Honda /Acura has updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
-
Restraints Wiring Repairs
Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
-
Typical Calibration Requirements For Blind Spot Sensors
Wednesday, 19 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
-
Typical Calibration Requirements For Forward Radar Sensors
Wednesday, 12 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
-
General Motors Position Statement: Pre- and Post-Repair System Scanning
Friday, 21 October 2016
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
-
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning
Thursday, 9 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
-
Quickly Identifying Outer Quarter Panels w/Rolled Hem Flanges
Monday, 5 March 2018
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...
-
OEM Linking Pin: Kia Outer Uniside Sectioning
Friday, 10 May 2024
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We’ve had technical inquiries that...
-
Calibration Research Tips: Nissan/INFINITI - Bumper Cover Replaced With Sonar Sensor Holder
Thursday, 9 May 2024
While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by...
-
I-CAR Just In Time: Lineman’s Glove Testing
Tuesday, 7 May 2024
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
-
OEM Emergency Response Guides: BMW/Mini
Thursday, 2 May 2024
Are you looking for OEM emergency response guides (ERGs)? The Repairability Technical Support (RTS) team has located these guides and either houses them on the RTS website, provides links to...
-
I-CAR Ford Mach-E Collision Repair And Electromechanical Repair Courses
Wednesday, 1 May 2024
I-CAR has developed courses for the Ford Mustang Mach-E, a general collision repair overview and a course that covers electromechanical repair.
-
I-CAR Repairers Realm: Controlling Static During Refinishing - Now Available
Tuesday, 30 April 2024
I-CAR had a discussion on controlling static during refinishing.
-
Film Thickness Gauge For Plastic Parts - Is It Worth The Investment?
Friday, 26 April 2024
Film thickness gauges continue to be a valuable tool in the collision industry. Most shops have gauges that work with both ferrous and non-ferrous substrates. So, should shops invest in a film...
-
Body Shop Business: EV Intake Process
Wednesday, 24 April 2024
Body Shop Business has released an article highlighting the importance of the electric vehicle (EV) intake process.
-
Repairer Driven News: Matte Clearcoat Challenges
Monday, 22 April 2024
Repairer Driven News (RDN) has released an article highlighting the challenges of matte and semi-gloss clearcoat.
-
I-CAR Just In Time: EV Repair Tips
Wednesday, 17 April 2024
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
- 2024
- May 2024 (5)
- April 2024 (12)
- March 2024 (12)
- February 2024 (12)
- January 2024 (10)
- 2023
- December 2023 (8)
- November 2023 (13)
- October 2023 (11)
- September 2023 (11)
- August 2023 (12)
- July 2023 (9)
- June 2023 (12)
- May 2023 (12)
- April 2023 (11)
- March 2023 (12)
- February 2023 (10)
- January 2023 (11)
- 2022
- December 2022 (11)
- November 2022 (12)
- October 2022 (11)
- September 2022 (13)
- August 2022 (11)
- July 2022 (10)
- June 2022 (13)
- May 2022 (11)
- April 2022 (12)
- March 2022 (10)
- February 2022 (11)
- January 2022 (13)
- 2021
- December 2021 (13)
- November 2021 (12)
- October 2021 (13)
- September 2021 (15)
- August 2021 (12)
- July 2021 (15)
- June 2021 (17)
- May 2021 (14)
- April 2021 (14)
- March 2021 (21)
- February 2021 (15)
- January 2021 (14)
- 2020
- December 2020 (13)
- November 2020 (17)
- October 2020 (12)
- September 2020 (14)
- August 2020 (11)
- July 2020 (18)
- June 2020 (16)
- May 2020 (14)
- April 2020 (20)
- March 2020 (12)
- February 2020 (14)
- January 2020 (14)
- 2019
- December 2019 (13)
- November 2019 (19)
- October 2019 (25)
- September 2019 (20)
- August 2019 (22)
- July 2019 (23)
- June 2019 (21)
- May 2019 (19)
- April 2019 (20)
- March 2019 (21)
- February 2019 (21)
- January 2019 (18)
- 2018
- December 2018 (19)
- November 2018 (19)
- October 2018 (17)
- September 2018 (16)
- August 2018 (21)
- July 2018 (20)
- June 2018 (21)
- May 2018 (17)
- April 2018 (19)
- March 2018 (22)
- February 2018 (16)
- January 2018 (20)
- 2017
- December 2017 (13)
- November 2017 (15)
- October 2017 (19)
- September 2017 (20)
- August 2017 (20)
- July 2017 (18)
- June 2017 (23)
- May 2017 (20)
- April 2017 (14)
- March 2017 (18)
- February 2017 (11)
- January 2017 (13)
- 2016
- December 2016 (9)
- November 2016 (14)
- October 2016 (21)
- September 2016 (11)
- August 2016 (11)
- July 2016 (8)
- June 2016 (13)
- May 2016 (10)
- April 2016 (11)
- March 2016 (12)
- February 2016 (11)
- January 2016 (8)
- 2015
- December 2015 (9)
- November 2015 (8)
- October 2015 (9)
- September 2015 (7)
- August 2015 (11)
- July 2015 (10)
- June 2015 (8)
- May 2015 (8)
- April 2015 (9)
- March 2015 (8)
- February 2015 (9)
- January 2015 (10)
- 2014
- December 2014 (12)
- November 2014 (7)
- October 2014 (11)
- September 2014 (10)
- August 2014 (9)
- July 2014 (12)
- June 2014 (9)
- May 2014 (14)
- April 2014 (9)
- March 2014 (6)
- February 2014 (1)
- January 2014 (27)
