Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News

Collision Repair News

Your job requires that you keep on top of the latest in vehicle, tool, and equipment technology – I-CAR is committed to helping you do so in one convenient place. We regularly publish new articles highlighting the latest and greatest collision repair information.

So check back often and follow us on Twitter @Ask_ICAR to ensure you’re equipped with the most up-to-date collision repair technical information available in the industry.


Newsletter Sign-Up

I-CAR Best Practices

Collision Repair Industry News

One-Time-Use Parts And Fasteners: Tesla

Posted on 19 October 2022

What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big question is "Where do I find this information?"

As the Repairability Technical Support (RTS) team researches OEMs for one-time-use fastener/part information, we are putting together a series of articles on how and where to locate this information for specific OEMs. Let’s take a look at Tesla.

Continue Reading...

Genesis Glass Replacement Requirements

Posted on 14 October 2022

The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.

Continue Reading...

What Happened to the I-CAR Advantage Articles?

Posted on 06 October 2022

What happened to the I-CAR Advantage articles? For a while, there’s been a feature on the Repairability Technical Support (RTS) website for the Advantage Online Articles Archive Request Form. This form allowed you to submit a request for articles and/or information that was in an old I-CAR Advantage article. Both the articles and the form have been discontinued.

Continue Reading...

Weld-Through Primer Guidelines: Genesis

Posted on 30 September 2022

Weld-through primers are generally a zinc-based product that is applied to the mating surfaces prior to welding. Corroding zinc forms zinc oxide, which protects the steel. This is called sacrificial corrosion. For a quality weld to be made it’s required that the weld-through primer be removed from the direct weld zone before welding the joint when GMA welding. Many OEMs have a position on when and how to use weld-through primer or when it shouldn’t be utilized. Let’s see what Genesis recommends and where this information can be found.

Continue Reading...

Refinishing Park Assist Sensors: Volvo

Posted on 29 September 2022

Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require painting to match the vehicle. Vehicle makers often provide information on the painting of new sensors. Some vehicle makers do not recommend refinishing sensors with minor finish damage because excessive paint thickness may adversely affect the operation of the park assist system. However, other vehicle makers allow refinishing and provide guidelines. Let’s see what Volvo has to say.

Continue Reading...

Maserati Restraints Wiring

Posted on 29 September 2022

The question is often asked, "Can supplemental restraints system wiring be repaired?" The answer is: it depends on the vehicle maker. Let's take a look at Maserati’s position on this subject.

Continue Reading...

Corrosion Protection Guidelines: Hyundai

Posted on 23 September 2022

A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots, that left untreated will lead to corrosion, and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealer, adhesives, foam fillers, and cavity waxes. Let’s take a look at what Hyundai says.

Continue Reading...

Advanced Driver Assistance Systems: 2021 Nissan Rogue

Posted on 22 September 2022

While many have noticed that advanced driver assistance systems (ADAS) are showing up on vehicles, there still is confusion on what is required of these systems after a collision occurs. The Ask I-CAR team frequently gets questions in regard to calibration of ADAS. Many of these questions can be answered simply by searching the OEM Calibration Requirements Search. However, there are some questions that may need more details than the calibration search provides. Let’s take a look at the 2021 Nissan Rogue ADAS.

Continue Reading...

Structural Sectioning Procedures: Tesla

Posted on 21 September 2022

Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.

Continue Reading...

One-Time-Use Parts And Fasteners: Kia

Posted on 16 September 2022

What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big question is "Where do I find this information?"

Continue Reading...

Additional Calibration Requirements: Genesis

Posted on 15 September 2022

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

It does not include Occupant Classification Systems (OCS), steering angle sensors, battery disconnects, or other calibrations/initializations required, when not related directly to ADAS. Let’s take a look at what additional items may require calibrations/initializations on Genesis vehicles.

Continue Reading...

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Hyundai Does Hyundai have part replacement procedures available?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan Is there a wiring repair procedure for the airbag connector?

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?