Sectioning And Partial Part Replacement: 2019 Audi A7

Sectioning And Partial Part Replacement: 2019 Audi A7

One of the top technical inquiries received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacement Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2019 Audi A7.

The full OEM Partial Part Replacement Search page for the 2019 Audi A7 can be viewed on the I-CAR website. This will give you a good understanding on general areas for sectioning or partial replacement. I-CAR does not have permission to show exact locations for sectioning or the procedure itself. However, Audi has a paid subscription website with collision repair information.

There are sectioning and partial part replacement procedures available for both the front lower rails and the front upper rails. The rear rails have a single sectioning procedure according to the body repair manual (BRM). A partial part replacement procedure is available for the trunk floor.

The outer uniside can be sectioned in multiple locations. There is also a sectioning procedure for the inner uniside. OEM procedures for the uniside reinforcements are available, including a sectioning procedure for the composite reinforcement in the A-pillar. The rear body panel on this vehicle can also be sectioned according to the BRM.

Additional I-CAR Collision Repair News you may find helpful:
Collision Information Website Access: Audi
Step-By-Step: Accessing Audi Repair Information