Additional Calibration Requirements: Mercedes-Benz

Posted on 21 July 2017

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

It does not include occupant classification systems (OCS), steering angle sensors, battery disconnects, or other calibrations/initializations required, when not related directly to ADAS. Let’s take a look at what additional items may require calibrations/initializations on Mercedes-Benz vehicles.

Continue Reading...

Corrosion Protection Guidelines: Volkswagen

Posted on 20 July 2017

A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that left untreated will lead to corrosion and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealer, adhesives, foam fillers, and cavity waxes. Let’s take a look at what Volkswagen says.

Continue Reading...

Repairer Driven News: Safety Tips For EVs, Hybrid Repair

Posted on 19 July 2017

Repairer Driven News (RDN) published an article that provided a Q&A session with I-CAR on safety tips for EVs, specific to hybrid repair. Let’s take a look at this article.

Continue Reading...

Body Construction And Material Repair Guidelines: General Motors

Posted on 19 July 2017

What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair limitations? These are just some of the questions that the RTS team fields on a daily basis.

As we know, today’s vehicles can be constructed from a wide variety of materials. Knowing if the OEM provides information on body construction materials and repair guidelines is a crucial step in providing a complete, safe, and quality repair. Let’s see what General Motors (GM) has to say.

Continue Reading...

Additional Calibration Requirements: Jaguar Land Rover

Posted on 14 July 2017

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

It does not include occupant classification systems (OCS), steering angle sensors, battery disconnects, or other calibrations/initializations required, when not related directly to ADAS. Let’s take a look at what additional items may require calibrations/initializations on Jaguar Land Rover vehicles.

Continue Reading...

Introducing the I-CAR Collision Reporter

Posted on 14 July 2017

While the Repairability Technical Support team will continue to deliver daily collision repair news articles, the I-CAR Collision Reporter is designed to help I-CAR’s customers and business partners navigate the rapid changes happening within North America's collision repair industry, and stay abreast of I-CAR news and developments.

Continue Reading...

Corrosion Protection Guidelines: Nissan/INFINITI

Posted on 13 July 2017

A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that left untreated will lead to corrosion and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealer, adhesives, foam fillers, and cavity waxes. Let’s take a look at what Nissan/INFINITI says.

Continue Reading...

Body Construction And Material Repair Guidelines: BMW/Mini

Posted on 12 July 2017

What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair limitations? These are just some of the questions that the RTS team fields on a daily basis.

As we know, today’s vehicles can be constructed from a wide variety of materials. Knowing if the OEM provides information on body construction materials and repair guidelines is a crucial step in providing a complete, safe, and quality repair. Let’s see what BMW/Mini has available to us.

Continue Reading...

Structural Sectioning Procedures: Volvo

Posted on 10 July 2017

Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.

Parts are made from various materials including HSS, UHSS, aluminum, and carbon fiber. These parts also have complex designs to collapse or transfer collision forces in a specific manner. Introducing a sectioning joint to many of these parts will alter how the part reacts to those collision forces. For this reason, sectioning a part is only allowed if supported by vehicle maker repair information. Let’s see what Volvo says about structural sectioning.

Continue Reading...

Corrosion Protection Guidelines: Toyota/Lexus

Posted on 07 July 2017

A key factor in collision repair is making long-lasting repairs. When a vehicle is repaired, many areas of corrosion protection are disturbed. This creates corrosion hot spots that left untreated will lead to corrosion and potentially a repair failure. However, there are certain precautions that can be taken to safely and properly restore the corrosion protection throughout the repair process. OEMs often give specifications on restoring corrosion protection. These specifications generally include seam sealer, adhesives, foam fillers, and cavity waxes. Let’s take a look at what Toyota/Lexus says.

Continue Reading...

Additional Calibration Requirements: Mazda

Posted on 07 July 2017

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

It does not include occupant classification systems (OCS), steering angle sensors, battery disconnects, or other calibrations/initializations required, when not related directly to ADAS. Let’s take a look at what additional items may require calibrations/initializations on Mazda vehicles.

Continue Reading...

Structural Sectioning Procedures: Porsche

Posted on 05 July 2017

Ask I-CAR receives many technical inquiries referring to sectioning. The collision repair industry wants to know where can you section, does the OEM have a sectioning procedure, and where can I find the sectioning procedure? Most OEMs allow sectioning to outer body panels and the front and rear rails. Sectioning reinforcements is not as common, as most reinforcements are replaced at factory seams.

Parts are made from various materials including HSS, UHSS, aluminum, and carbon fiber. These parts also have complex designs to collapse or transfer collision forces in a specific manner. Introducing a sectioning joint to many of these parts will alter how the part reacts to those collision forces. For this reason, sectioning a part is only allowed if supported by vehicle maker repair information. Let’s see what Porsche says about structural sectioning.

Continue Reading...

Additional Calibration Requirements: Subaru

Posted on 30 June 2017

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

It does not include occupant classification systems (OCS), steering angle sensors, battery disconnects, or other calibrations/initializations required, when not related directly to ADAS. Let’s take a look at what additional items may require calibrations/initializations on Subaru vehicles.

Continue Reading...

2017 SkillsUSA National Competition

Posted on 30 June 2017

The 53RD annual SkillsUSA National Leadership and Skills Conference took place June 19-23, 2017 in Louisville, KY. Every year I-CAR sends volunteers to judge the collision repair technology competition. Let’s take a look at this year’s results.

Continue Reading...

I-CAR Best Practice: Damage Analysis for ADAS Identification and Calibration Requirements

Posted on 29 June 2017

Periodically, I-CAR Repairability Summits are held to bring together collision industry stakeholders and subject matter experts to develop collision repair processes and best practices for repair of late-model, collision damaged vehicles. In the I-CAR Repairability Summit the topic of damage analysis for advanced driver assistance systems (ADAS) identification and calibration requirements was discussed.

Continue Reading...