What's The Difference Between Sectioning And Partial Replacement?

Submit a new collision repair question here!

What's The Difference Between Sectioning And Partial Replacement?

Posted on 28 August 2015 | Share: |

A new seam was created and welded to replace the damaged part.

What is the difference between sectioning and partial replacement? Let's take a look and add some clarification.

Factory seams are where two parts are welded together during vehicle assembly using spot welds, rivets, fillet welds, etc. Partial part replacement is defined as replacing a part at a factory seam. This requires removing the original attachment method to disassemble an assembly at a factory seam.

Sectioning is defined as the process of cutting a portion of a part, away from a factory seam. This location is based on vehicle maker procedures. Some vehicle makers offer multiple sectioning locations for a part. When "sectioning" a part, the technician will create a new repair joint that did not exist prior to repairs. This may mean sectioning the service part and installing that sectioned portion of the service part on the vehicle using a sectioning joint.

The OEM Partial Part Replacement Search is a search tool to identify which vehicles have replacement procedures available, including sectioning or partial replacement at factory seams.

Additional I-CAR Collision Repair News you may find helpful:
A Video Tour of the RTS Portal: OEM Partial Part Replacement Search
How to Use the OEM Partial Part Replacement Search

Related I-CAR Courses

Toyota/Lexus/Scion Position Statement: Pre- and Post-Repair System Scanning Thursday, 28 July 2016
As the industry continues to ask if pre- and post-repair system scanning is necessary, Toyota/Lexus/Scion provides their answer.
Pre- and Post-Repair System Scanning Position Statements Wednesday, 9 January 2019
Are you wondering if a particular OEM or organization has a published position statement on pre-repair and post-repair scanning? We have compiled a list of most of the position statements on the...
ADAS, Calibration, And Scanning Article Hotspot Monday, 14 January 2019
Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on...
Honda/Acura Position Statement: Pre- and Post-Repair System Scanning - UPDATE Wednesday, 22 May 2019
Honda /Acura have updated their position statement on pre- and post-repair scanning to give more clarification on what is expected for scanning.
Restraints Wiring Repairs Monday, 23 May 2016
Over the past few months, we've been sharing OEM position statements on restraints wiring repairs. Now we're bringing them all together in one place for easy reference.
Typical Calibration Requirements For Blind Spot Sensors Wednesday, 19 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
Typical Calibration Requirements For Forward Radar Sensors Wednesday, 12 October 2016
Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not...
General Motors Position Statement: Pre- and Post-Repair System Scanning Friday, 21 October 2016
As the industry continues to ask, are pre- and post-repair scans necessary, General Motors provides their answer.
FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning Thursday, 9 June 2016
FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.
Quickly Identifying Outer Quarter Panels w/Rolled Hem Flanges Monday, 5 March 2018
The I-CAR best practice article, Recycled Outer Quarter Panels w/Rolled Hem Flanges has gotten a lot of interest from the collision repair industry. It’s important to know which vehicles are...

Repairer Driven News: Matte Clearcoat Challenges Monday, 22 April 2024
Repairer Driven News (RDN) has released an article highlighting the challenges of matte and semi-gloss clearcoat.
I-CAR Repairers Realm: Controlling Static During Refinishing - Coming Soon Friday, 19 April 2024
I-CAR is having a discussion on how to control static during refinishing.
I-CAR Just In Time: EV Repair Tips Wednesday, 17 April 2024
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...
I-CAR RTS App Monday, 15 April 2024
Looking for another tool for your toolbox? An informational guide at your fingertips? Well, the I-CAR Repairability Technical Support (RTS) app is what you are looking for!
Repairer Driven News: ADAS Radar Optimized Paint Color Resources Friday, 12 April 2024
Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. Paint film thickness not only may affect the performance of ADAS radars, color...
Back-To-Basics: Window Tab Retractor Thursday, 11 April 2024
Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Window regulators have evolved over the years, most now using a clip type retaining method. With...
High-Voltage Vehicle Paint Booth Quick Reference Tuesday, 9 April 2024
When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.
Ford On Target 2024: Volume 1 Friday, 5 April 2024
Ford has released the first installment of their On Target publication for 2024.
3M Offers SOP And Process Hands-On Training and Skill Development Thursday, 4 April 2024
The 3M Skills Development Center is a 15,000 sq ft facility where technicians can take a Body Repair Course or Paint Prep and Refinish Course. Both courses are majority hands-on of standard...
OEM Linking Pin: Nissan/INFINITI Outer Uniside Sectioning - Cut Line Clarification Wednesday, 3 April 2024
As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that...

2024
- April 2024 (10)
- March 2024 (12)
- February 2024 (12)
- January 2024 (10)

2023
- December 2023 (8)
- November 2023 (13)
- October 2023 (11)
- September 2023 (11)
- August 2023 (12)
- July 2023 (9)
- June 2023 (12)
- May 2023 (12)
- April 2023 (11)
- March 2023 (12)
- February 2023 (10)
- January 2023 (11)

2022
- December 2022 (11)
- November 2022 (12)
- October 2022 (11)
- September 2022 (13)
- August 2022 (11)
- July 2022 (10)
- June 2022 (13)
- May 2022 (11)
- April 2022 (12)
- March 2022 (10)
- February 2022 (11)
- January 2022 (13)

2021
- December 2021 (13)
- November 2021 (12)
- October 2021 (13)
- September 2021 (15)
- August 2021 (12)
- July 2021 (15)
- June 2021 (17)
- May 2021 (14)
- April 2021 (14)
- March 2021 (21)
- February 2021 (15)
- January 2021 (14)

2020
- December 2020 (13)
- November 2020 (17)
- October 2020 (12)
- September 2020 (14)
- August 2020 (11)
- July 2020 (18)
- June 2020 (16)
- May 2020 (14)
- April 2020 (20)
- March 2020 (12)
- February 2020 (14)
- January 2020 (14)

2019
- December 2019 (13)
- November 2019 (19)
- October 2019 (25)
- September 2019 (20)
- August 2019 (22)
- July 2019 (23)
- June 2019 (21)
- May 2019 (19)
- April 2019 (20)
- March 2019 (21)
- February 2019 (21)
- January 2019 (18)

2018
- December 2018 (19)
- November 2018 (19)
- October 2018 (17)
- September 2018 (16)
- August 2018 (21)
- July 2018 (20)
- June 2018 (21)
- May 2018 (17)
- April 2018 (19)
- March 2018 (22)
- February 2018 (16)
- January 2018 (20)

2017
- December 2017 (13)
- November 2017 (15)
- October 2017 (19)
- September 2017 (20)
- August 2017 (20)
- July 2017 (18)
- June 2017 (23)
- May 2017 (20)
- April 2017 (14)
- March 2017 (18)
- February 2017 (11)
- January 2017 (13)

2016
- December 2016 (9)
- November 2016 (14)
- October 2016 (21)
- September 2016 (11)
- August 2016 (11)
- July 2016 (8)
- June 2016 (13)
- May 2016 (10)
- April 2016 (11)
- March 2016 (12)
- February 2016 (11)
- January 2016 (8)

2015
- December 2015 (9)
- November 2015 (8)
- October 2015 (9)
- September 2015 (7)
- August 2015 (11)
- July 2015 (10)
- June 2015 (8)
- May 2015 (8)
- April 2015 (9)
- March 2015 (8)
- February 2015 (9)
- January 2015 (10)

2014
- December 2014 (12)
- November 2014 (7)
- October 2014 (11)
- September 2014 (10)
- August 2014 (9)
- July 2014 (12)
- June 2014 (9)
- May 2014 (14)
- April 2014 (9)
- March 2014 (6)
- February 2014 (1)
- January 2014 (27)

Hyundai	Does Hyundai have a sectioning procedure available?
Kia	Does Kia have a sectioning procedure available?
Chevrolet	Does Chevrolet have a warning against sectioning when there is no procedure?
BMW	Can I-CAR send me BMW repair procedures?
Honda	What does Honda say about repairing damaged airbag system wiring harnesses?
Hyundai	Does Hyundai have part replacement procedures available?
Mercedes-Benz	Can I-CAR send me Mercedes-Benz repair procedures?
Honda	What does Honda say about straightening front lower rails?
Subaru	Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan	Is there a wiring repair procedure for the airbag connector?

What's The Difference Between Sectioning And Partial Replacement?

Related I-CAR Courses

Top Ten Vehicle Specific Questions

Top Ten I-CAR Specific Questions