Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Typical Calibration Requirements

Typical Calibration Requirements

Posted on 28 September 2017 | Share: | Print Print

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at what we learned in this series.

We learned that there can be sensors or cameras on all sides of a vehicle. If a vehicle is involved in a collision that is equipped with ADAS, a calibration will more than likely be required. The calibrations vary by OEM but can require the use of special alignment tools, along with targets. Most vehicles will require the use of a scan tool to perform a calibration. Also, calibrations can be both static (in-shop) or dynamic (on-road).

Being informed on these systems is important to a complete, safe, and quality repair. Many consumers are purchasing a certain vehicle specifically for these driver assistance features. The consumer knows the system is on their vehicle and they are relying on it to help keep them safe. Therefore, technicians also need to be aware when driver assistance systems exist and have the knowledge to properly repair the system.

Additional I-CAR Collision Repair News you may find helpful:
ADAS, Calibration, And Scanning Article Hotspot
Collision Repair Diagnostics Definitions
Typical Calibration Requirements For 360° Camera View
Typical Calibration Requirements For Adaptive Lighting
Typical Calibration Requirements For Blind Spot Sensors
Typical Calibration Requirements For Forward Facing Cameras
Typical Calibration Requirements For Forward Radar Sensors
Typical Calibration Requirements For Park Assist Sensors
Typical Calibration Requirements For Steering Angle/Position Sensors

Related I-CAR Courses

Course I-CAR ADAS Courses

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Hyundai Does Hyundai have part replacement procedures available?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan Is there a wiring repair procedure for the airbag connector?

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?