Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Sectioning And Partial Part Replacement: 2020 Kia Telluride 

Sectioning And Partial Part Replacement: 2020 Kia Telluride 

Posted on 27 May 2020 | Share: | Print Print

One of the top technical inquiries received at Ask I-CAR is, “Is there a sectioning or partial replacement procedure available?” To help answer this question, RTS has an OEM Partial Part Replacemet Search available. Here you will find information on if these procedures are available on a specific vehicle. Let’s take a closer look at the 2020 Kia Telluride.

The full OEM Partial Part Replacement Search page for the 2020 Kia Telluride can be viewed on the I-CAR website. This will give you a good understanding on general areas for sectioning or partial replacement. I-CAR does not have permission to show exact locations for sectioning or the procedure itself. However, Kia has a paid subscription website with collision repair information.

There are OEM procedures available for replacing part of the front upper rails and the rear rails at factory seams. Installation of these rails specifies the use of spot welds and plug welds. Sectioning procedures, however, are not available for these components. There is only full part replacement available for the front lower rails, according to the body repair manual.

Multiple sectioning locations are available for the outer uniside, using spot welding, plug welding, and open butt welding for installation. There is a single OEM procedure available to section a reinforcement in order to remove the side panel assembly. Partial part replacement at factory seams is available for the trunk floor. There are no OEM sectioning procedures available for the inner uniside or the rear body panel. However, a full-part replacement procedure is available for the rear body panel.

For additional Kia information, check out the Kia OEM Information page.

Additional I-CAR Collision Repair News you may find helpful:
Collision Information Website Access: Kia
Step-By-Step: Accessing Kia Repair Information
What's A Kia Fender Apron Upper Panel?

Related I-CAR Courses

Course Kia Collision Repair Overview

Course Panel Removal and Preparation for Installation

Course Part Replacement at Factory Seams

Course Sectioning Overview

Course Sectioning Scenarios

Course Training and Certification: Steel Sectioning

  • I-CAR Just In Time: EV Repair Tips Wednesday, 17 April 2024

    Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...

  • I-CAR RTS App Monday, 15 April 2024

    Looking for another tool for your toolbox? An informational guide at your fingertips? Well, the I-CAR Repairability Technical Support (RTS) app is what you are looking for!

  • Repairer Driven News: ADAS Radar Optimized Paint Color Resources Friday, 12 April 2024

    Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. Paint film thickness not only may affect the performance of ADAS radars, color...

  • Back-To-Basics: Window Tab Retractor Thursday, 11 April 2024

    Sometimes going back-to-basics can make the difference between a quality repair and a failed repair. Window regulators have evolved over the years, most now using a clip type retaining method. With...

  • High-Voltage Vehicle Paint Booth Quick Reference Tuesday, 9 April 2024

    When refinishing high-voltage (HV) vehicles, it is important to check for OEM paint booth temperature recommendations so that HV components do not get damaged in the heat.

  • Ford On Target 2024: Volume 1 Friday, 5 April 2024

    Ford has released the first installment of their On Target publication for 2024.

  • 3M Offers SOP And Process Hands-On Training and Skill Development Thursday, 4 April 2024

    The 3M Skills Development Center is a 15,000 sq ft facility where technicians can take a Body Repair Course or Paint Prep and Refinish Course. Both courses are majority hands-on of standard...

  • OEM Linking Pin: Nissan/INFINITI Outer Uniside Sectioning - Cut Line Clarification Wednesday, 3 April 2024

    As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that...

  • I-CAR Repairers Realm: All New RTS App From I-CAR - Now Available Friday, 29 March 2024

    I-CAR had a discussion on the new Repairability Technical Support (RTS) app from I-CAR.

  • OEM Linking Pin: Subaru Solterra Body Repair Manual Tuesday, 26 March 2024

    As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. We‘ve had technical inquiries that...

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Hyundai Does Hyundai have part replacement procedures available?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan Is there a wiring repair procedure for the airbag connector?

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?