OEM Restraints System Part Replacement Search


2020 Hyundai Venue

Print

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

1. Turn ignition switch to OFF
2. Disconnect the negative cable from the battery
3. Wait at least 3 minute

Before removing any of the SRSCM parts (including the disconnection of the connectors), always disconnect the
SRSCM connector.

REV: 12/2020

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

When the front airbag(s) deploy after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s)
• Emergency fastening device(s) [PRETENSIONER,FRT SEATBELT]
• Front impact sensors [AIRBAG SENSOR,FRONT]
• SRS wiring harnesses
• Replace the crash pad which is damaged while Passenger Airbag (PAB) is deployed

When the side/curtain airbag(s) deploy after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE]
• SRS wiring harnesses
• Seat belt pretensioner(s)
• Emergency fastening device(s) [PRETENSIONER,FRT SEATBELT]
• The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.

• Steering wheel
• Inspect the clock spring for heat damage
• Airbag connectors

Additional Information


*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The following charts were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. To ensure that the most recent information is used, always refer to the vehicle maker's technical information before working with airbags and other passive restraint systems.


Related I-CAR Courses