OEM Restraints System Part Replacement Search
2014 Kia Optima Hybrid
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
Before removing any of the SRSCM parts (including the disconnection of the connectors), always disconnect the SRSCM connector1) Always turn the ignition switch OFF
2) Disconnect the negative cable from the battery
3) Wait at least three minutes before beginning work.
REV: 09/2019
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items:• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• If the Passenger Airbag (PAB) has been deployed, replace the damaged crash pad
• Seat belt pretensioner(s)
• Anchor pretensioner(s)
• Front Impact Sensors [AIRBAG SENSOR,FRONT]
When the side/curtain airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Before doing any SRS repairs, use the GDS Pro to check for DTCs.• Inspect the clock spring for heat damage. If any damage found, replace the clock spring.
• WCS reset and accuracy check should be performed when the vehicle is brought to the repair shop due to an accident
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
