OEM Partial Part Replacement Search
2015 Lincoln MKX
Click the links below for the OEM repair information website (note: additional purchase may be required for a subscription to each OEM); How To Use The OEM Partial Part Replacement Search; I-CAR Best Practice: Disassembly of a Steel Service Part at a Factory Seam; and additional RTS portal information such as Collision Repair News articles, OEM position statements, publications, and additional resources.
Front
Front Lower Rail |
Sectioning:
No OEM Procedure |
Partial Part At Factory Seam:
No OEM Procedure |
Front Upper Rail |
Sectioning:
No OEM Procedure |
Partial Part At Factory Seam:
No OEM Procedure |
Side
Outer Uniside |
Sectioning:
OEM Procedure(s) Available |
Note: Does NOT have outer quarter panel w/rolled hem flange |
Uniside Reinforcement |
Sectioning:
No OEM Procedure |
Inner Uniside |
Sectioning:
No OEM Procedure |
Per the 2015 Lincoln MKX Workshop manual:
"WARNING: Do not carry out body side sectioning repairs in areas of laser welds. Factory laser welds cannot be duplicated with conventional welding equipment and structural integrity may be compromised. Failure to follow this instruction may result in serious injury to vehicle occupant(s)."
"WARNING: Do not cut or grind body side components within 50 mm (1.96 in) of restraint anchoring points. Welding within 50 mm (1.96 in) of restraint anchoring points may result in incorrect operation of restraint devices. For additional restraints anchoring location information, refer to Section 501-20A and Section 501-20B. Failure to follow these instructions may result in serious injury to vehicle occupant(s)."
"WARNING: Do not carry out body side sectioning repairs in areas of door hinge or striker anchoring points. Welding within 50 mm (1.96 in) of door hinge or striker locations may compromise structural integrity during a collision. Failure to follow these instructions may result in serious injury to vehicle occupant(s)."
Rear
Rear Rail |
Sectioning:
No OEM Procedure |
Partial Part At Factory Seam:
No OEM Procedure |
Trunk Floor |
Sectioning:
No OEM Procedure |
Partial Part At Factory Seam:
No OEM Procedure |
Rear Body Panel |
Sectioning:
No OEM Procedure |
Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The contents are based on the repair information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information.