OEM Restraints System Part Replacement Search
2011 Lexus CT200h
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
After the power switch is turned off, the multi-media module receiver assembly (w/ Multi-display) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal.1. Turn ignition switch to OFF and remove key.
2. Disconnect and isolate negative battery cable.
3. Wait at least 90 seconds.
Before using an electric welder on the vehicle, remove any SRS parts around the area being repaired.
Before using an electric welder anywhere on the vehicle, disconnect the center airbag sensor assembly connectors.
REV: 08/2016
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
• When the SRS parts are deployed (including when only an airbag or pretensioner is deployed) due to a collision, be sure to replace all sensors in the damaged areas (anywhere in need of repair). [AIRBAG SENSOR,FRONT; AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL] and airbag sensor assembly [MODULE,AIRBAG CONTROL].[Replace deployed airbags]
• Horn button assembly [AIRBAG,STEERING WHEEL]
• Lower No. 1 instrument panel airbag assembly [AIRBAG,KNEE BOLSTER]
• Lower No. 2 instrument panel airbag assembly [AIRBAG,KNEE BOLSTER]
• Instrument panel passenger airbag assembly [AIRBAG,INSTRUMENT PNL]
• Curtain shield airbag assemblies [AIRBAG,ROOF]
• Front seat airbag assemblies. If the side airbag was deployed, replace the front seat airbag assembly, front seatback cover, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with a new one [AIRBAG & SEAT BACK ASSY]
• Airbag sensor assembly [MODULE,AIRBAG CONTROL]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Check for DTCs before disconnecting the cable from the negative (-) auxiliary battery terminal.• Airbag sensor assembly [MODULE,AIRBAG CONTROL]
• Front airbag sensors [AIRBAG SENSOR,FRONT]
• Door side airbag sensors [AIRBAG SENSOR,FRT DOOR]
• Side airbag sensor assemblies [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE]
• Side No. 2 airbag sensor assemblies [AIRBAG SENSOR,QTR PANEL]
• Horn button assembly [AIRBAG, STEERING WHEEL]
• Lower No. 1 instrument panel airbag assembly [AIRBAG,KNEE BOLSTER]
• Lower No. 2 instrument panel airbag assembly [AIRBAG,KNEE BOLSTER]
• Instrument panel passenger airbag assembly [AIRBAG,INSTRUMENT PNL]
• Curtain shield airbag assemblies [AIRBAG,ROOF]
• Front seat airbag assemblies [AIRBAG,FRONT SEAT; AIRBAG & SEAT BACK ASSY]
• Front seat outer belt assemblies
• Spiral cable [CLOCK SPRING]
• Steering wheel
• Instrument panel
• Instrument panel reinforcement
• Seat position sensor
• SRS wire harnesses or connectors
• Occupant Classification ECU
• Surrounding headliner and inner trim
• Visually check the airbag sensors in undamaged areas for defects. If any of the defects is found or an airbag sensor has detected a major collision, replace the airbag sensor with a new one: [AIRBAG SENSOR,FRONT; AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]rrr
Replace any faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting a vehicle that was in a collision, be sure to check all of the seat belt systems regardless of whether or not the system was activated in the collision. Replace any damaged or malfunctioning systems.
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
