OEM Restraints System Part Replacement Search
2009 Mitsubishi Galant
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
WARNINGService or maintenance of any SRS component or SRS-related component must be performed only at an authorized MITSUBISHI dealer.
1. Turn the ignition key to the "LOCK" position,
2. Disconnect the negative battery cable and tape the terminal.
3. Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
REV: 11/2012
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
After the air bag deployment, replace the air bag module with a new one:WHEN FRONT AIR BAGS DEPLOY IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• Airbag modules [AIRBAG, STEERING WHEEL; AIRBAG, INSTRUMENT PNL], if deployed
• After deployment of an air bag, replace the clock spring with a new one
• Seat belt with pre-tensioner, if deployed
• Slide adjuster [TRACK,DRIVER BUCKET; AIRBAG SENSOR & TRACK, passenger side]
• Front impact sensors [AIRBAG SENSOR,FRONT]
• Instrument panel
WHEN SIDE AND CURTAIN AIR BAGS DEPLOY IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• Side impact sensors [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]
• Front seat assembly [AIRBAG & SEAT BACK ASSY] and slide adjuster [TRACK,DRIVER BUCKET; AIRBAG SENSOR & TRACK, passenger side], on the deployed side
• Curtain airbag modules [AIRBAG, ROOF], if deployed
• Seat belt with pre-tensioner, if deployed
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Perform SRS-ECU memory check• Check the SRS components. If the SRS components are showing any visible damage such as dents, cracks, or deformation, replace them with new ones
WHEN FRONT AIR BAGS DEPLOY IN A COLLISION:
• Seat slide sensor
• Seat belt switch
• Check the wiring harnesses for binding, the connectors for damage, poor connections, and the terminals for deformation
Steering wheel, steering column and shaft assembly:
• Check the wiring harness (built into the steering wheel) and the connectors for damage, and the terminals for deformation.
• Install the air bag module to check fit or alignment with the steering wheel.
• Check the steering wheel for noise, binding or difficult operation and excessive free play.
• Check the steering column shaft shock absorbing mechanism
WHEN SIDE AND CURTAIN AIR BAGS DEPLOY IN A COLLISION:
• Check the wiring harnesses for binding, the connectors for damage, poor connections, and the terminals for deformation
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
