OEM Restraints System Part Replacement Search
2023 Mitsubishi Mirage G4
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
WARNINGService or maintenance of any SRS component or SRS-related component must be performed only at an authorized MITSUBISHI dealer.
1. Turn the ignition key to the "LOCK" (OFF) position
2. Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and air bag(s) deployment
3. Wait 60 seconds or more before proceeding with work.
REV: 03/2024
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
After the air bag deployment, replace the air bag module with a new one.WHEN FRONT AIR BAGS DEPLOY IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• DRIVERS air bag module [AIRBAG, STEERING WHEEL], if deployed
• Passenger’s (front) air bag module [AIRBAG, INSTRUMENT PNL], if deployed
• Knee air bag module [AIRBAG,KNEE BOLSTER], if deployed
• Seat belt with pre-tensioner
• Front impact sensors [AIRBAG SENSOR,FRONT]
• Seat slide sensor [AIRBAG SENSOR,SEAT TRACK]
WHEN SIDE AND CURTAIN AIR BAGS DEPLOY IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• Front seatback assembly [AIRBAG & SEAT BACK ASSY], if deployed, When replacing the side-airbag module, replace the seat frame assembly
• Curtain air bag module [AIRBAG,ROOF], if deployed
• Side impact sensor (front and rear) [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]
• Headlining
• Front pillar trim, center pillar trim upper, quarter trim upper
• Seat belt with pre-tensioner
WHEN CURTAIN AIR BAGS DEPLOY IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• Side impact sensors (rear) [AIRBAG SENSOR,QTR PANEL]
• Front passenger’s seat cushion frame assembly (Occupant classification-ECU and weight sensor)
• Curtain airbag modules [AIRBAG, ROOF], if deployed
• Seat belt with pre-tensioner
WHEN CURTAIN AIR BAGS DEPLOY AND SEAT BELT PRE-TENSIONER OPERATE IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• Side impact sensors (rear) [AIRBAG SENSOR,QTR PANEL]
• Front passenger’s seat cushion frame assembly (Occupant classification-ECU and weight sensor)
• Curtain airbag modules [AIRBAG, ROOF], if deployed
• Seat belt with pre-tensioner
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Perform SRS-ECU memory check• Check the SRS components. If the SRS components are showing any visible damage such as dents, cracks, or deformation, replace them with new ones
• Check the wiring harness for binding, the connector for damage, and the terminal for deformation
WHEN FRONT AIR BAGS DEPLOY IN A COLLISION:
• Clock spring
• Steering wheel, steering column assembly
• Instrument panel assembly
• Check the wiring harness for binding, the connector for damage, and the terminal for deformation
WHEN SIDE AND CURTAIN AIR BAGS DEPLOY IN A COLLISION:
• Check the wiring harness for binding, the connector for damage, and the terminal for deformation
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
