OEM Restraints System Part Replacement Search
2023 Mazda CX-9
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Switch the ignition off2. Disconnect the negative battery terminal
3. Wait for 1 minute or more to allow the backup power supply of the SAS control module to deplete its stored power
REV:01/2023
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Deployed airbags: [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL; AIRBAG & SEAT ASSY,FRT; AIRBAG,ROOF]• After a side air bag has operated (deployed), always replace both the side air bag module and the seat back (pad, frame, trim) with new parts. [AIRBAG & SEAT ASSY,FRT]
• Always replace the SAS control module with a new one. [MODULE,AIRBAG CONTROL]
• Always replace the crash zone sensor with a new one. [AIRBAG SENSOR,FRONT]
• Always replace the side air bag sensor with a new one. [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]
• Always replace the pressure sensor with a new one. [AIRBAG SENSOR,FRT DOOR]
• Replace the seat belt once the load limiter operates
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Before reusing a live (undeployed) air bag module, pretensioner seat belt or a lap pre-tensioner seat belt, always use the on-board diagnostic to diagnose the air bag module, pre-tensioner seat belt or a lap pretensioner seat belt to verify that they have no malfunction.• If a problem is found in the air bag wiring harness, always replace the wiring harness with a new one.
• Perform the seat weight sensor inspection using the M-MDS
• Seat belt assemblies
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
