OEM Restraints System Part Replacement Search


2007 Ford Taurus

Print

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

1. Disconnect and isolate battery ground cable.
2. Wait at least 1 minute.

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

• Deployed airbag modules [Airbag, Instrument Pnl and/or Airbag, Steering Wheel and/or Airbag, Front Seat]
• All airbag sensors [Airbag Sensor, Front and/or Airbag Sensor, Occupancy Classification and/or Airbag Sensor, Interior]
• All restraint sensors (no matter what devices have deployed)
• Restraint control module [Module, Airbag Control]
• Clockspring
• Electronic crash severity sensor
• Seat belt pretensioner/buckle switch assembly
• All seat belt assemblies (retractor and buckle assemblies) that were in use
• Any damaged or defective restraint system part

For a Side Airbag Deployment:
• Deployed airbag modules [Airbag, Front Seat]
• All airbag sensors [Airbag Sensor, Front and/or Airbag Sensor, Active Weight and/or Airbag Sensor, Interior]
• All restraint sensors (no matter what devices have deployed)
• Restraint control module [Module, Airbag Control]
• Seat back trim cover
• Seat back foam
• All seat belt assemblies (retractor and buckle assemblies) that were in use
• Any damaged or defective restraint system part

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

• Steering wheel and column
(front impact sensor)
• Driver's seat track position sensor
• All airbag sensor brackets and surrounding sheet metal
• Restraint control module bracket [Brkt, Airbag Control Module] and surrounding sheet metal
• Electronic crash severity sensor mounting bracket
• Instrument panel knee bolsters [Bolster, Knee] and mounting points
• Instrument panel braces and brackets
• Instrument panel and mounting points
• All wire harnesses which contain restraint circuits
• All seat belt assemblies which were not in use. Each assembly must be certified by a qualified service technician as fully functional.
• Seat frame
• Seat cushion
• Seat track assembly
• Seat mounting points
• Floor pan around seat assembly
• Any restraint system part or wiring identified by the restraint diagnostic checks

For a Side Airbag Deployment:
• All airbag sensor brackets and surrounding sheet metal
• Restraint control module bracket [Brkt, Airbag Control Module] and surrounding sheet metal
• All wire harnesses which contain restraint circuits
• All seat belt assemblies which were not in use. Each assembly must be certified by a qualified service technician as fully functional.
• Seat frame
• Seat cushion
• Seat track assembly
• Seat mounting points
• Floor pan around seat assembly
• Any restraint system part or wiring identified by the restraint diagnostic checks


Additional Information

SEARCH

*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The following charts were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. To ensure that the most recent information is used, always refer to the vehicle maker's technical information before working with airbags and other passive restraint systems.


Related I-CAR Courses