OEM Restraints System Part Replacement Search


2021 Mazda CX-9

Print

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

1. Switch the ignition off
2. Disconnect the negative battery terminal
3. Wait for 1 minute or more to allow the backup power supply of the SAS control module to deplete its stored power

REV:12/2020

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

Deployed airbags: [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL; AIRBAG & SEAT ASSY,FRT; AIRBAG,ROOF]

• After a side air bag has operated (deployed), always replace both the side air bag module and the seat back (pad, frame, trim) with new parts. [AIRBAG & SEAT ASSY,FRT]
• Always replace the SAS control module with a new one. [MODULE,AIRBAG CONTROL]
• Always replace the crash zone sensor with a new one. [AIRBAG SENSOR,FRONT]
• Always replace the side air bag sensor with a new one. [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]
• Always replace the pressure sensor with a new one. [AIRBAG SENSOR,FRT DOOR]
• Replace the seat belt once the load limiter operates

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

• Before reusing a live (undeployed) air bag module, pretensioner seat belt or a lap pre-tensioner seat belt, always use the on-board diagnostic to diagnose the air bag module, pre-tensioner seat belt or a lap pretensioner seat belt to verify that they have no malfunction.
• If a problem is found in the air bag wiring harness, always replace the wiring harness with a new one.
• Perform the seat weight sensor inspection using the M-MDS
• Seat belt assemblies

Additional Information


*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The following charts were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. To ensure that the most recent information is used, always refer to the vehicle maker's technical information before working with airbags and other passive restraint systems.


Related I-CAR Courses