OEM Restraints System Part Replacement Search


2019 Hyundai Veloster

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for
repairing of the related DTCs.

1. Turn ignition switch to OFF
2. Disconnect the battery negative cable from battery
3. Wait at least 3 minute

Before removing any of the SRSCM parts (including the disconnection of the connectors), always disconnect the SRSCM connector.

REV: 10/2021

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

When the front airbag(s) deployed after a collision, replace the following items:

• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Front, Rear seat belt pretensioner (s)
• Anchor pretensioner(s)
• Front impact sensor [AIRBAG SENSOR,FRONT]
• SRS wiring harnesses

NOTE: Replace the crash pad which that has been damaged after the PAB has been deployed

When the side/curtain airbag(s) deployed after a collision, replace the following items:

• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,FRT DOOR]
• SRS wiring harnesses
• Front, Rear seat belt pretensioner(s)
• Anchor pretensioner(s)

NOTE: Make sure that the seat back cover is installed properly. Improper Installation may prevent the proper deployment

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.

• Steering wheel
• When the front airbag(s) deployed after a collision,
• Inspect the clock spring for heat damage. If any damage found, replace the clock spring.
• After the vehicle is completely repaired, confirm the SRS airbag system is OK

Additional Information


*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.


Related I-CAR Courses