OEM Restraints System Part Replacement Search
2018 Hyundai Santa Fe Sport
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn the ignition switch OFF2. Disconnect the negative cable from the battery
3. Wait at least 3 minutes before beginning work
Before removing any of the SRS parts (including the disconnection of the connectors), always disconnect the
SRS connector.
REV: 08/2017
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items:• SRSCM [AIRBAG MODULE,INTERIOR]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,KNEE BOLSTER; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s)
• Front impact sensors [AIRBAG SENSOR,FRONT]
• SRS wiring harnesses
• Replace the crash pad which is damaged when the PAB [AIRBAG,INSTRUMENT PNL] is deployed
When the side/curtain airbag(s) deployed after a collision, replace the following items:
• SRSCM [AIRBAG MODULE,INTERIOR]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,QTR PANEL]
• SRS wiring harnesses
The side airbag cannot be disassembled from the seat back assembly, so replace the seat back assembly when replacing the side airbag.
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.• Steering wheel
• Replace the crash pad which is damaged while PAB (passenger airbag) is deployed pad
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
