OEM Restraints System Part Replacement Search
2015 Lexus LS
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
Always confirm DTCs before disconnecting the cable from the negative (-) battery terminal.1. Turn ignition switch to OFF and remove key.
2. Disconnect and isolate negative battery cable.
3. Wait at least 90 seconds.
When using electric welding anywhere on the vehicle, disconnect the center airbag sensor connectors.
REV: 04/2016
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When any of the airbags have deployed due to the collision, be sure to replace all sensors in the damaged areas and center airbag sensor assembly. [AIRBAG SENSOR,FRONT; AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL; MODULE,AIRBAG CONTROL][Deployed Airbags]
• Steering pad [AIRBAG,STEERING WHEEL]
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
• Curtain shield airbag [AIRBAG,ROOF]
• Front seat side airbag [AIRBAG & SEAT BACK ASSY]
• Active headrest inflator • When replacing a deployed active headrest inflator, always replace it together with the headrest.
• Driver side knee airbag [AIRBAG,KNEE BOLSTER]
• Front passenger side knee airbag [AIRBAG,KNEE BOLSTER]
• Rear seat side airbag [AIRBAG & SEAT BACK ASSY]
• Seat cushion airbag [W/OTTOMAN] [AIRBAG,REAR SEAT]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Perform a diagnostic system check• Steering pad [AIRBAG,STEERING WHEEL]
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
• Curtain shield airbag [AIRBAG,ROOF]
• Front seat side airbag [AIRBAG & SEAT BACK ASSY]
• Active headrest inflator [UNIT,ACTIVE HEADREST]
• Driver side knee airbag [AIRBAG,KNEE BOLSTER]
• Front passenger side knee airbag [AIRBAG,KNEE BOLSTER]
• Rear seat side airbag [AIRBAG & SEAT BACK ASSY]
• Seat cushion airbag [AIRBAG,REAR SEAT]
• Seat belt pretensioner
• Center airbag sensor [MODULE,AIRBAG CONTROL]
• Front airbag sensor [AIRBAG SENSOR,FRONT]
• Side airbag sensor [AIRBAG SENSOR,SIDE]
• Rear airbag sensor [AIRBAG SENSOR,QTR PANEL]
• Door side airbag sensor [AIRBAG SENSOR,FRT DOOR]
• Occupant classification ECU and initialization requirements [AIRBAG MODULE,INTERIOR]
• Seat position airbag sensor [AIRBAG SENSOR,SEAT TRACK]
Replace the faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting a vehicle that was in a collision, be sure to check all of the seat belt systems regardless of whether or not the system was activated in the collision. Replace any damaged or malfunctioning systems
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
