OEM Restraints System Part Replacement Search
2014 Scion tC
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
Before using an electric welder anywhere on the vehicle, disconnect the center airbag sensor assembly connectors. These connectors contain shorting springs. This feature reduces the possibility of the airbag deploying due to current entering the squib wiring.1. Turn ignition switch to OFF and remove key.
2. Disconnect and isolate negative battery cable.
3. Wait at least 90 seconds.
REV: 11/2015
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When any of the airbags have deployed, replace the related airbag sensor and inspect its normal operation.• Steering wheel pad,[AIRBAG, STEERING WHEEL], [if deployed]
• Driver side knee airbag assembly, [AIRBAG,KNEE BOLSTER], [if deployed]
• Passenger airbag assembly, [AIRBAG, INSTRUMENT PNL], [if deployed]
• Passenger side knee airbag assembly, [AIRBAG,KNEE BOLSTER], [if deployed]
• Front seat airbag assembly, [AIRBAG,FRONT SEAT], [if deployed]
• Curtain shield airbag assembly, [AIRBAG,ROOF], [if deployed]
• Airbag sensor assembly center, [MODULE, AIRBAG CONTROL]
• When airbags have deployed as the result of a collision, be certain to replace all front airbag sensors in the damaged area (anywhere in need of repair). [AIRBAG SENSOR,FRONT]
• When airbags have deployed as the result of a collision, be certain to replace all door side airbag sensors in the damaged area (anywhere in need of repair). [AIRBAG SENSOR,FRT DOOR]
• When airbags have deployed as the result of a collision, be certain to replace all side airbag sensors in the damaged area (anywhere in need of repair) [AIRBAG SENSOR,QTR PANEL]
• When airbags have deployed as the result of a collision, be certain to replace all rear airbag sensors in the damaged area (anywhere in need of repair) [AIRBAG SENSOR,QTR PANEL]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Steering Pad [AIRBAG, STEERING WHEEL]• Steering wheel
• Instrument panel passenger airbag [AIRBAG, INSTRUMENT PNL]
• Instrument panel
• Instrument panel reinforcement
• Curtain shield airbag [AIRBAG,ROOF]
• Front seat airbag [AIRBAG & SEAT ASSY,FRT]
• Lower No. 1 instrument panel airbag [AIRBAG,KNEE BOLSTER]
• Lower No. 2 instrument panel airbag [AIRBAG,KNEE BOLSTER]
• Front seat belt pretensioner
• Center airbag sensor [MODULE, AIRBAG CONTROL]
• Front airbag sensor [AIRBAG SENSOR,FRONT]
• Side airbag sensor [AIRBAG SENSOR,QTR PANEL]
• Rear airbag sensor [AIRBAG SENSOR,QTR PANEL]
• Door side airbag sensor [AIRBAG SENSOR,FRT DOOR]
• Seat position airbag sensor
• Occupant classification ECU
• Seat and seat mounting points
• Seatbelts and seatbelt mounting points
• Front pillar garnish
• Roof headlining
• SRS wire harness or connector
• If any of the SRS parts are dropped, or if any cracks, dents or other defects are found, replace them with new parts
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
